2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units (12cp of MATH1* can count towards Science requirements)

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 84 credit points of Biomedical Stream core units

► 12 credit points of Biomedical Specialist elective units

► 6 credit points of Engineering Systems units

► 6 credit points of Bioelectronics and Biomedical Control units

► Up to 12 credit points of additional Biomedical Specialist elective units

Science (96 credit points):

► 24 credit points of Science degree core units (12cp of MATH1* can count towards Engineering requirements)

► 60 credit points of Health stream units

► 12 credit points of OLE units

► Up to 12 credit points of Science electives

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Science

For the Bachelor of Science component of a combined degree:

(a) The units of study that may be taken are set out in Table A of the Faculty of Science, and Table S and Table O of the Shared Pool for Undergraduate Degrees.

(b) Candidates must complete 96 credit points in the Bachelor of Science including:

(i) any required degree core units as set out in Table A of the Faculty of Science; and

(ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Science; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the Faculty of Science or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Science.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Biomedical Stream Core	6	Select from CHEM1111: Chemistry 1A
Biomedical Stream Core	6	Select from ENGG1801: Engineering Computing Note: Students wishing to major in Computer Science can replace this unit with INFO1110.
Engineering Core	3	Select from MATH1021: Calculus of One Variable
Engineering Core	3	Select from MATH1002: Linear Algebra
Biomedical Stream Core	6	Select from AMME1960: Biomedical Engineering 1A
Engineering Core	0	Select from ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: MATH1021 and MATH1002 may be replaced by advanced units MATH1921 and MATH1902.

Year 1 - Semester 2

Type	CP	CP From
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Engineering Core	3	Select from MATH1023: Multivariable Calculus and Modelling
Biomedical Stream Core	6	Select from ENGG1802: Engineering Mechanics
Biomedical Stream Core	6	Select from AMME1961: Biomedical Engineering 1B
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data

Note: MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.

Year 2 - Semester 1

Type	CP	CP From
Health Science Core	6	Select from BIOL1006: Life and Evolution BIOL1007: From Molecules to Ecosystems BIOL1008: Human Biology
Health Science Core	6	Select from HSBH1012: Introduction to Health and Health Care
Biomedical Stream Core	6	Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering
Biomedical Stream Core	6	Select from AMME2960: Biomedical Engineering 2

Year 2 - Semester 2

Type	CP	CP From
Health Science Core	6	Select from PSYC1002: Psychology 1002
Health Science Core	6	Select from HSBH1013: Society and Health
Biomedical Stream Core	6	Select from MECH2901: Anatomy and Physiology for Engineers
Biomedical Stream Core	6	Select from AMME1362: Introduction to Engineering Materials
Engineering Core	0	Select from ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 1

Type	CP	CP From
Health Science Core	6	Select from HSBH2007: Research Methods in Health
Science Units	18	Select from Unit Block: Science Units

Year 3 - Semester 2

Type	CP	CP From
Health Science Core	6	Select from HSBH2009: Innovations in eHealth
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2
Biomedical Stream Core	6	Select from ELEC2104: Electronic Devices and Circuits
Biomedical Stream Core	6	Select from MECH3921: Biomedical Design and Technology
Engineering Systems Units	6	Select from MECH2400: Mechanical Systems Design 1

Year 4 - Semester 1

Type	CP	CP From
Health Science Core	6	Select from Unit Block: Health Science Core Note: 1x 3000-level selective unit
Health Science Core	6	Select from Unit Block: Health Science Core Note: 1x 3000-level selective research unit
Biomedical Stream Core	6	Select from AMME3660: Biomanufacturing
Biomedical Specialist Electives	6	Select from Unit Block: Biomedical Specialist Electives
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3
Engineering Core	0	Select from ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 4 - Semester 2

Type	CP	CP From
Health Science Core	6	Select from Unit Block: Health Science Core Note: 1x 3000-level selective disciplinary project unit
Health Science Core	6	Select from Unit Block: Health Science Core Note: 1x 3000-level selective interdisciplinary project unit
List	6	Select from Unit Blocks: Biomedical Specialist Electives Science Units Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both. Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
Bioelectronics & Biomedical Control Units	6	Select from Unit Block: Bioelectronics & Biomedical Control Units Note: May be taken in Semester 1 or Semester 2, swapping with Biomedical Specialist Electives. Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802

Year 5 - Semester 1

Type	CP	CP From
List	6	Select from Unit Blocks: Biomedical Specialist Electives Science Units Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both. Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4
Engineering Core	0	Select from ENGP3000: Professional Engagement Program 3 Note: Enrolment in ENGP3000 is reliant on successful completion of ENGP2000. As such, the placement of ENGP3000 in this structure is example only, and actual enrolment in ENGP3000 is dependent on the time taken to complete ENGP2000.
Engineering Core	6	Select from BMET4111: Thesis A
Biomedical Stream Core	6	Select from AMME4971: Tissue Engineering Note: Replaced by BMET3971 from 2021
Biomedical Specialist Electives	6	Select from Unit Block: Biomedical Specialist Electives

Year 5 - Semester 2

Type	CP	CP From
List	6	Select from Unit Blocks: Biomedical Specialist Electives Science Units Note: As there are 18cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 18cp of electives from either Engineering or Science, or a combination of both. Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
Engineering Core	6	Select from BMET4112: Thesis B
Biomedical Stream Core	6	Select from MECH4961: Biomechanics and Biomaterials Note: Replaced by BMET3961 from 2021

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
BMET4010	Major Industrial Project	24	Semester 1 Semester 2
BMET4111	Thesis A	6	Semester 1 Semester 2
BMET4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR BMET4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR BMET4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - Biomedical Stream Core (Min CP: 84,Max CP: 84)

Unit Code	Unit Name	CP	Sessions Offered
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME1960	Biomedical Engineering 1A	6	Semester 1
AMME1961	Biomedical Engineering 1B	6	Semester 2
AMME2960	Biomedical Engineering 2	6	Semester 1
AMME3660	Biomanufacturing	6	Semester 1
AMME4971	Tissue Engineering	6	Semester 1
BMET3961	Biomaterials	6	Semester 2
BMET3971	Tissue Engineering	6	Semester 1
CHEM1111	Chemistry 1A	6	Semester 1 Semester 2 Int January
ELEC1103	Fundamentals of Electrical and Electronic Engineering	6	Semester 1
ELEC2104	Electronic Devices and Circuits	6	Semester 2
ENGG1801	Engineering Computing	6	Semester 1 Int January
ENGG1802	Engineering Mechanics	6	Semester 2 Summer Main Int January
MECH2901	Anatomy and Physiology for Engineers	6	Semester 2
MECH3921	Biomedical Design and Technology	6	Semester 2
MECH4961	Biomechanics and Biomaterials	6	Semester 2

Note: From 2021 BMET3971 replaces AMME4971, and BMET3961 replaces MECH4961.

Block 3 - Engineering Systems Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AMME2200	Introductory Thermofluids	6	Semester 2
CHNG2803	Heat and Mass Transfer	6	Semester 1
ELEC2302	Signals and Systems	6	Semester 2
MECH2400	Mechanical Systems Design 1	6	Semester 1

Block 4 - Bioelectronics & Biomedical Control Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AMME5790	Introduction to Biomechatronics	6	Semester 2
BMET3802	Biomedical Instrumentation	6	Semester 2
BMET5790	Introduction to Biomechatronics	6	Semester 2
BMET5995	Advanced Bionics	6	Semester 1
ELEC3802	Fundamentals of Biomedical Engineering	6	Semester 1

Note: Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802

Block 6 - Biomedical Specialist Electives (Min CP: 12,Max CP: 48)

Unit Code	Unit Name	CP	Sessions Offered
AMME4710	Computer Vision and Image Processing	6	Semester 2
AMME4990	Biomedical Product Development	6	Semester 1
AMME5931	Nanomaterials in Medicine	6	Semester 1
AMME5951	Fundamentals of Neuromodulation	6	Semester 1
AMME5958	Nanotechnology in Biomedical Engineering	6	Semester 2
AMME5962	Introduction to Mechanobiology	6	Semester 2
AMME5992	Regulatory Affairs in the Medical Industry	6	Semester 1 Semester 2
AMME5995	Advanced Bionics	6	Semester 1
BMET2903	Biomedical Physics	6	Semester 1
BMET2922	Computational Analysis for Biomedical Signals	6	Semester 2
BMET2925	AI, Data, and Society in Health	6	Semester 1 Semester 1 Online
BMET3990	Biomedical Product Development	6	Semester 2
BMET5911	Instrumentation for Nanotechnology	6	Semester 1
BMET5933	Biomedical Image Analysis	6	Semester 1
BMET5934	Biomedical Machine Learning	6	Semester 2
BMET5944	Nanofabrication and Bioinspired Materials	6	Semester 2
BMET5953	Rehabilitation Engineering	6	Semester 1
BMET5957	Neural Engineering	6	Semester 2
BMET5963	Microfluidics in Healthcare	6	Semester 2
BMET5964	Advanced Cellular Biomechanics	6	Semester 2
CHNG5601	Membrane Science	6	Semester 1
CHNG5602	Biophysics and Biosensors	6	Semester 2
CHNG5603	Advanced Industrial Modelling and Analysis	6	Semester 1
CHNG5604	Advanced Membrane Engineering	6	Semester 2
CHNG5605	Bio-Products: Laboratory to Marketplace	6	Semester 2
COMP5048	Visual Analytics	6	Semester 1 Semester 2
ELEC3305	Digital Signal Processing	6	Semester 1
ELEC3404	Electronic Circuit Design	6	Semester 1
ELEC3803	Bioelectronics [not offered in 2021]	6	Semester 2
ELEC5514	IoT Wireless Sensing and Networking	6	Semester 2
ELEC5614	Real Time Computing	6	Semester 1
ELEC5701	Technology Venture Creation [not offered in 2021]	6	Semester 2
HTIN5002	Quality Frameworks for Health Innovation	6	Semester 2 Block Mode
MECH5310	Advanced Engineering Materials	6	Semester 1
MECH5720	Sensors and Signals	6	Semester 2
MECH5907	Orthopaedic and Surgical Engineering	6	Semester 2
MTRX5700	Experimental Robotics	6	Semester 1

Note: At least 18 credit points (three units of study) must be selected from the units listed above.

From 2021 BMET3990 replaces AMME4990.

Block 7 - Health Science Core (Min CP: 60,Max CP: 60)

Unit Code	Unit Name	CP	Sessions Offered
BIOL1006	Life and Evolution	6	Semester 1
BIOL1007	From Molecules to Ecosystems	6	Semester 2
BIOL1008	Human Biology	6	Semester 1
HSBH1012	Introduction to Health and Health Care	6	Semester 1
HSBH1013	Society and Health	6	Semester 2
HSBH2007	Research Methods in Health	6	Semester 1
HSBH2009	Innovations in eHealth	6	Semester 2
PSYC1002	Psychology 1002	6	Semester 2 Summer Main

Note: Unit list is incomplete as the Health stream is still under development. Refer to Science Handbook for more information.

Block 8 - Science Units (Min CP: 18,Max CP: 96)

Note: For the Bachelor of Science (Health Stream) component, students are required to complete a total of 96 credit points of Science Table A units as listed in the handbook of the Faculty of Science, including 24 credit points of core units, a 60 credit point Health stream and 12 credit points of OLEs. See Faculty handbooks at http://sydney.edu.au/handbooks

Course:	Biomedical / Science (Health) (2018)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018

Faculty of Engineering

Biomedical / Science (Health) (2018)

1. Overview