2. Requirements

Summary

In summary the requirements are:

Students must complete 288 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 84 credit points of Biomedical stream core units

► 12 credit points of Biomedical Specialist elective units

► 6 credit points of Engineering Systems units

► 6 credit points of Bioelectronics and Biomedical Control units

Laws:

► 144 credit points of Laws core units

► Candidates must complete the requirements for the Bachelor of Engineering Honours before proceeding to Year Five of the Bachelor of Laws

The handbook rules governing this degree are as follows:

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

(a) For the Bachelor of Engineering and Bachelor of Laws combined degree, a candidate must complete 288 credit points and any additional requirements specified in the following clauses.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Laws

For the Bachelor of Laws component of a combined degree candidates must complete 144 credit points of Law units of study taken from the School of Law Undergraduate Table, comprising:

(a) 102 credit points of compulsory units of study; and

(b) 42 credit points of elective units of study, of which a maximum of 36 credit points are taken from Part 1 and a minimum of 6 credit points are taken from Part 2.

(c) Students may apply to take up to a maximum of 24 credit points of LAWS6000/JURS6000 units of study as elective units of study:

(i) enrolment in LAWS6000/JURS6000 units of study will be subject to availability and any unit pre-requisites or assumed knowledge, which may include relevant industry experience or prior specialist study.

(ii) enrolment in LAWS6000/JURS6000 units is only permitted after a candidate has completed 96 credit points towards the Bachelor of Laws.

(iii) students may only enrol in LAWS6000/JURS6000 units listed in the Bachelor of Laws Elective units of study Table.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1021: Calculus of One Variable
Biomedical Stream Core	6	Select from BMET1960: Biomedical Engineering 1A
Law Junior Core	6	Select from LAWS1006: Foundations of Law
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Engineering Core	3	Select from MATH1002: Linear Algebra
Engineering Core	0	Select from ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type	CP	CP From
Engineering Core	3	Select from MATH1023: Multivariable Calculus and Modelling
Biomedical Stream Core	6	Select from BMET1961: Biomedical Engineering 1B
Law Junior Core	6	Select from LAWS1012: Torts
Law Junior Core	0	Select from LAWS1013: Legal Research 1
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data
Biomedical Stream Core	6	Select from ENGG1802: Engineering Mechanics

Year 2 - Semester 1

Type	CP	CP From
Biomedical Stream Core	6	Select from BMET2960: Biomedical Engineering 2
Biomedical Stream Core	6	Select from CHEM1111: Chemistry 1A
Biomedical Stream Core	6	Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering
Biomedical Stream Core	6	Select from ENGG1801: Engineering Computing

Note: Equivalent advanced level units can replace Biomedical Stream Core units, subject to prerequisite conditions being met. Students should seek advice from their department before enrolling.

Year 2 - Semester 2

Type	CP	CP From
Biomedical Stream Core	6	Select from AMME1362: Introduction to Engineering Materials
Biomedical Stream Core	6	Select from BMET2901: Anatomy and Physiology for Engineers
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2
Biomedical Stream Core	6	Select from ELEC2104: Electronic Devices and Circuits
Engineering Core	0	Select from ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
Law Junior Core	0	Select from LAWS1019: Legal Research II
Engineering Systems Units	6	Select from MECH2400: Mechanical Systems Design 1 Note: From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor.

Year 3 - Semester 1

Type	CP	CP From
Biomedical Stream Core	6	Select from BMET3660: Biomanufacturing
Law Junior Core	6	Select from LAWS1023: Public International Law
Law Junior Core	6	Select from LAWS1015: Contracts
Law Junior Core	6	Select from LAWS1014: Civil and Criminal Procedure
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3

Year 3 - Semester 2

Type	CP	CP From
Biomedical Stream Core	6	Select from BMET3921: Biomedical Design and Technology
Law Junior Core	6	Select from LAWS1016: Criminal Law
Law Junior Core	6	Select from LAWS1017: Torts and Contracts II
Law Junior Core	6	Select from LAWS1021: Public Law

Year 4 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4
Biomedical Specialist Electives	6	Select from Unit Block: Biomedical Specialist Electives
Engineering Core	6	Select from BMET4111: Thesis A
Bioelectronics & Biomedical Control Units	6	Select from Unit Block: Bioelectronics & Biomedical Control Units Note: Can be taken in either Semester 1 or Semester 2, swapping with Biomedical Specialist Electives Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802
Biomedical Stream Core	6	Select from BMET4971: Tissue Engineering Note: Replaced by BMET3971 from 2021
Engineering Core	0	Select from ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 4 - Semester 2

Type	CP	CP From
Engineering Core	6	Select from BMET4112: Thesis B
Biomedical Stream Core	6	Select from BMET4961: Biomechanics and Biomaterials Note: Replaced by BMET3961 from 2021
Biomedical Specialist Electives	6	Select from Unit Block: Biomedical Specialist Electives

Year 5 - Semester 1

Type	CP	CP From
Law Senior Core	6	Select from LAWS2010: Administrative Law
Law Senior Core	6	Select from LAWS2011: Federal Constitutional Law
Law Senior Core	6	Select from LAWS2012: Intro to Property and Commercial Law
Law Senior Core	6	Select from LAWS2013: The Legal Profession

Year 5 - Semester 2

Type	CP	CP From
Law Senior Core	6	Select from LAWS2014: Corporations Law
Law Senior Core	6	Select from LAWS2015: Equity
Law Senior Core	6	Select from LAWS2016: Evidence
Law Senior Core	6	Select from LAWS2017: Real Property

Year 6 - Semester 1

Type	CP	CP From
Law Senior Core	6	Select from LAWS2018: Private International Law A
Law Senior Electives	18	Select from Unit Block: Law Senior Electives

Note: In year 6 students are required to complete LAWS2018 Private International Law A plus 42 credit points from Semester 1 Senior Elective Units as listed in Law Faculty Handbook Table 1. See Law Faculty Handbook for more details: http://sydney.edu.au/handbooks/law/

LAWS2018 may be taken in Semester 1 or Semester 2. Students who commenced the Combined Law program before 2011 do not need to complete LAWS2018 but must complete 48 credit points of elective units of study rather than 42 credit points.

Year 6 - Semester 2

Type	CP	CP From
Law Senior Electives	24	Select from Unit Block: Law Senior Electives

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
BMET4010	Major Industrial Project	24	Semester 1 Semester 2
BMET4111	Thesis A	6	Semester 1 Semester 2
BMET4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR BMET4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR BMET4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - Law Junior Core (Min CP: 48,Max CP: 48)

Unit Code	Unit Name	CP	Sessions Offered
LAWS1006	Foundations of Law	6	Semester 1
LAWS1012	Torts	6	Semester 2 S1 Intensive
LAWS1013	Legal Research 1	0	Semester 1 Semester 2
LAWS1014	Civil and Criminal Procedure	6	Semester 1
LAWS1015	Contracts	6	Semester 1 Semester 2 Summer Early
LAWS1016	Criminal Law	6	Semester 1 Semester 2
LAWS1017	Torts and Contracts II	6	Semester 1 Semester 2 Winter Main
LAWS1019	Legal Research II	0	Semester 1 Semester 2
LAWS1021	Public Law	6	Semester 2 Int February
LAWS1023	Public International Law	6	Semester 1 Semester 2

Block 3 - Engineering Systems Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AMME2200	Introductory Thermofluids	6	Semester 2
CHNG2803	Heat and Mass Transfer	6	Semester 1
ELEC2302	Signals and Systems	6	Semester 2
MECH2400	Mechanical Systems Design 1	6	Semester 1

Block 4 - Bioelectronics & Biomedical Control Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AMME5790	Introduction to Biomechatronics	6	Semester 2
BMET3802	Biomedical Instrumentation	6	Semester 2
BMET5790	Introduction to Biomechatronics	6	Semester 2
BMET5995	Advanced Bionics	6	Semester 1
ELEC3802	Fundamentals of Biomedical Engineering	6	Semester 1

Note: Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802

Block 6 - Biomedical Specialist Electives (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
AMME4710	Computer Vision and Image Processing	6	Semester 2
BMET2903	Biomedical Physics	6	Semester 1
BMET2922	Computational Analysis for Biomedical Signals	6	Semester 2
BMET2925	AI, Data, and Society in Health	6	Semester 1 Semester 1 Online
BMET3962	Introduction to Mechanobiology	6	Semester 2
BMET3990	Biomedical Product Development	6	Semester 2
BMET4981	Applied Biomedical Engineering	6	Semester 2
BMET4990	Biomedical Product Development	6	Semester 1
BMET5907	Orthopaedic and Surgical Engineering	6	Semester 2
BMET5911	Instrumentation for Nanotechnology	6	Semester 1
BMET5931	Nanomaterials in Medicine	6	Semester 1
BMET5933	Biomedical Image Analysis	6	Semester 1
BMET5934	Biomedical Machine Learning	6	Semester 2
BMET5935	Biomedical Application in Genetic Technology	6	Semester 1
BMET5944	Nanofabrication and Bioinspired Materials	6	Semester 2
BMET5951	Fundamentals of Neuromodulation [not running in 2020]	6	Semester 1
BMET5953	Rehabilitation Engineering	6	Semester 1
BMET5957	Neural Engineering	6	Semester 2
BMET5958	Nanoscale Biomedical Diagnostics	6	Semester 1
BMET5962	Introduction to Mechanobiology	6	Semester 2
BMET5963	Microfluidics in Healthcare	6	Semester 2
BMET5964	Advanced Cellular Biomechanics	6	Semester 2
BMET5992	Regulatory Affairs in the Medical Industry	6	Semester 2
BMET5995	Advanced Bionics	6	Semester 1
CHNG5601	Membrane Science	6	Semester 1
CHNG5602	Biophysics and Biosensors	6	Semester 2
CHNG5603	Advanced Industrial Modelling and Analysis	6	Semester 1
CHNG5604	Advanced Membrane Engineering	6	Semester 2
CHNG5605	Bio-Products: Laboratory to Marketplace	6	Semester 2
COMP5048	Visual Analytics	6	Semester 1 Semester 2
ELEC3305	Digital Signal Processing	6	Semester 1
ELEC3404	Electronic Circuit Design	6	Semester 1
ELEC3803	Bioelectronics [not offered in 2021]	6	Semester 2
ELEC5514	IoT Wireless Sensing and Networking	6	Semester 2
ELEC5614	Real Time Computing	6	Semester 1
ELEC5701	Technology Venture Creation [not offered in 2021]	6	Semester 2
HTIN5002	Quality Frameworks for Health Innovation	6	Semester 2 Block Mode
MECH5310	Advanced Engineering Materials	6	Semester 1
MECH5720	Sensors and Signals	6	Semester 2
MTRX5700	Experimental Robotics	6	Semester 1

Note: From 2021 BMET3990 replaces BMET4990.

Block 7 - Biomedical Stream Core (Min CP: 84,Max CP: 84)

Unit Code	Unit Name	CP	Sessions Offered
AMME1362	Introduction to Engineering Materials	6	Semester 2
BMET1960	Biomedical Engineering 1A	6	Semester 1
BMET1961	Biomedical Engineering 1B	6	Semester 2
BMET2901	Anatomy and Physiology for Engineers	6	Semester 2
BMET2960	Biomedical Engineering 2	6	Semester 1
BMET3660	Biomanufacturing	6	Semester 1
BMET3921	Biomedical Design and Technology	6	Semester 1 Semester 2
BMET3961	Biomaterials	6	Semester 2
BMET3971	Tissue Engineering	6	Semester 1
BMET4961	Biomechanics and Biomaterials	6	Semester 2
BMET4971	Tissue Engineering	6	Semester 1
CHEM1111	Chemistry 1A	6	Semester 1 Semester 2 Int January
ELEC1103	Fundamentals of Electrical and Electronic Engineering	6	Semester 1
ELEC2104	Electronic Devices and Circuits	6	Semester 2
ENGG1801	Engineering Computing	6	Semester 1 Int January
ENGG1802	Engineering Mechanics	6	Semester 2 Summer Main Int January

Note: From 2021 BMET3971 replaces AMME4971, and BMET3961 replaces MECH4961.

Block 8 - Law Senior Core (Min CP: 54,Max CP: 54)

Unit Code	Unit Name	CP	Sessions Offered
LAWS2010	Administrative Law	6	Semester 1
LAWS2011	Federal Constitutional Law	6	Semester 1
LAWS2012	Intro to Property and Commercial Law	6	Semester 1
LAWS2013	The Legal Profession	6	Semester 1
LAWS2014	Corporations Law	6	Semester 2 Winter Main
LAWS2015	Equity	6	Semester 2 Summer Main
LAWS2016	Evidence	6	Semester 2 Summer Early
LAWS2017	Real Property	6	Semester 2 Winter Main
LAWS2018	Private International Law A	6	Semester 1 Semester 2

Block 9 - Law Senior Electives (Min CP: 42,Max CP: 42)

Note: Electives are chosen from the list of senior LAW units as listed in the Law School faculty handbook.

Course:	Biomedical / Law (2019)
CP Required:	288
Min FT Duration:	6.00 Years
Min PT Duration:	N/A
Faculty/School:	School of Biomedical Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

Faculty of Engineering

School of Biomedical Engineering

Biomedical / Law (2019)

1. Overview