1. Overview

Course:	Civil Engineering (2021)
CP Required:	192
Min FT Duration:	4.00 Years
Min PT Duration:	N/A
Faculty/School:	Civil Engineering
Years Offered:	2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 6 credit points of Introductory Computing units table

► 12 credit points of Foundation Mathematics units table

► 30 credit points of Project table

► The Professional Engagement Program (PEP) units comprising ENGP1001 (0cp), ENGP1002 (0cp), ENGP1003 (0cp), ENGP2001 (0cp), ENGP2002 (0cp), ENGP2003 (0cp), ENGP3001 (0cp) and ENGP3002 (0cp)

► 96 credit points of Civil Stream core units

► 30 credit points of Civil Stream elective units

► 12 credit points of 3000+ level Engineering electives

► 6 credit points of Free Electives (Engineering Electives, or a Table S elective)

The completion of a specialisation is not mandatory. If a student chooses to do a specialisation, it must be completed within the 192 credit points described above.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Dalyell Scholars Program

Unit substitutions may be available for students enrolled in the Dalyell Scholars Program, depending on their year of commencement and degree. Dalyell Scholars can view the Canvas page for further information specific to their circumstances: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Foundation Mathematics Table	3	Select from MATH1002: Linear Algebra
Foundation Mathematics Table	3	Select from MATH1021: Calculus of One Variable
Professional Engagement Program (PEP) Units	0	Select from ENGP1001: Professional Engagement Program 1A Note: All students must enrol in ENGP1001 in their first semester of enrolment.
Civil Stream Core	6	Select from CIVL1802: Statics
Projects Table	6	Select from CIVL1900: Introduction to Civil Engineering
Introductory Computing Units	6	Select from ENGG1810: Introduction to Engineering Computing

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type	CP	CP From
Civil Stream Core	6	Select from CIVL1810: Engineering Construction and Surveying
Foundation Mathematics Table	3	Select from MATH1023: Multivariable Calculus and Modelling
Foundation Mathematics Table	3	Select from MATH1005: Statistical Thinking with Data
Civil Stream Core	6	Select from CIVL1110: Materials
Professional Engagement Program (PEP) Units	0	Select from ENGP1002: Professional Engagement Program 1B
Civil Stream Core	6	Select from GEOL1501: Engineering Geology 1 Note: From 2024, CIVL1022 replaces GEOL1501. Students who have not yet completed GEOL1501 should enrol in CIVL1022.

Year 2 - Semester 1

Type	CP	CP From
Civil Stream Core	6	Select from CIVL2201: Structural Mechanics
Civil Stream Core	6	Select from MATH2061: Linear Mathematics and Vector Calculus
Civil Stream Core	6	Select from CIVL2700: Transport Systems
Professional Engagement Program (PEP) Units	0	Select from ENGP1003: Professional Engagement Program 1C
Projects Table	6	Select from ENGG2112: Multi-disciplinary Engineering

Year 2 - Semester 2

Type	CP	CP From
Civil Stream Core	6	Select from CIVL2010: Environmental Engineering
Civil Stream Core	6	Select from CIVL2410: Soil Mechanics 1
Civil Stream Core	6	Select from CIVL2812: Project Appraisal
Civil Stream Core	6	Select from CIVL2611: Introductory Fluid Mechanics
Professional Engagement Program (PEP) Units	0	Select from ENGP2001: Professional Engagement Program 2A

Year 3 - Semester 1

Type	CP	CP From
Civil Stream Core	6	Select from CIVL3612: Fluid Mechanics
Civil Stream Core	6	Select from CIVL3205: Concrete Structures 1
Professional Engagement Program (PEP) Units	0	Select from ENGP2002: Professional Engagement Program 2B
Civil Stream Electives	6	Select from Unit Block: Civil Stream Electives
Civil Stream Electives	6	Select from Unit Block: Civil Stream Electives

Year 3 - Semester 2

Type	CP	CP From
Civil Stream Core	6	Select from CIVL3811: Engineering Design and Construction
Civil Stream Core	6	Select from CIVL3206: Steel Structures 1
Projects Table	6	Select from ENGG3112: Interdisciplinary Engineering
Civil Stream Electives	6	Select from Unit Block: Civil Stream Electives
Professional Engagement Program (PEP) Units	0	Select from ENGP2003: Professional Engagement Program 2C

Year 4 - Semester 1

Type	CP	CP From
Civil Stream Core	6	Select from CIVL4903: Civil Engineering Design
Civil Stream Electives	6	Select from Unit Block: Civil Stream Electives
Projects Table	6	Select from CIVL4022: Thesis A
3000+ level Engineering units	6	Select from Unit Block: 3000+ level Engineering units
Professional Engagement Program (PEP) Units	0	Select from ENGP3001: Professional Engagement Program 3A

Year 4 - Semester 2

Type	CP	CP From
Free Electives	6	Select from Unit Block: Free Electives
Projects Table	6	Select from CIVL4023: Thesis B
Civil Stream Electives	6	Select from Unit Block: Civil Stream Electives
3000+ level Engineering units	6	Select from Unit Block: 3000+ level Engineering units
Professional Engagement Program (PEP) Units	0	Select from ENGP3002: Professional Engagement Program 3B

5. Unit Blocks

Block 0 - Introductory Computing Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
ENGG1810	Introduction to Engineering Computing	6	Semester 1 Semester 2 Int February
INFO1110	Introduction to Programming	6	Semester 1 Semester 2
INFO1910	Introduction to Programming (Advanced)	6	Semester 1 Semester 2

Note: Students must complete:

-6cp from ENGG1810 or (INFO1110 or INFO1910). For Civil stream students it is recommended that ENGG1810 is taken.

Block 1 - Foundation Mathematics Table (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 12cp including:

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

Block 2 - Projects Table (Min CP: 30,Max CP: 30)

Unit Code	Unit Name	CP	Sessions Offered
AERO1560	Introduction to Aerospace Engineering	6	Semester 1
BMET1960	Biomedical Engineering 1A	6	Semester 1
CHNG1108	Introduction to Chemical Engineering	6	Semester 1
CIVL1900	Introduction to Civil Engineering	6	Semester 1
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC1004	Practical Introduction to Electrical Engineering	6	Semester 1
ENGG2112	Multi-disciplinary Engineering	6	Semester 1 Semester 2
ENGG3112	Interdisciplinary Engineering	6	Semester 1 Semester 2
MECH1560	Introduction to Mechanical Engineering	6	Semester 1
MTRX1701	Introduction to Mechatronic Engineering	6	Semester 1

Note: - Students are to select the introduction unit relevant to their stream. Students in both Electrical and Software Engineering streams are to take ELEC1004.

- Students enrolled in the Dalyell Stream may count any Dalyell unit in place of ENGG2112 and may count any Engineering Dalyell unit in place of ENGG3112

- Students are to select the thesis units relevant to their stream. Aeronautical, Mechanical and Mechatronic students are to enrol in the AMME coded units. Students in both Electrical and Software are to enrol in the ELEC coded units.

Block 3 - Professional Engagement Program (PEP) Units

Unit Code	Unit Name	CP	Sessions Offered
ENGP1001	Professional Engagement Program 1A	0	Semester 1 Semester 2
ENGP1002	Professional Engagement Program 1B	0	Semester 1 Semester 2
ENGP1003	Professional Engagement Program 1C	0	Semester 1 Semester 2
ENGP2001	Professional Engagement Program 2A	0	Semester 1 Semester 2
ENGP2002	Professional Engagement Program 2B	0	Semester 1 Semester 2
ENGP2003	Professional Engagement Program 2C	0	Semester 1 Semester 2
ENGP3001	Professional Engagement Program 3A	0	Semester 1 Semester 2
ENGP3002	Professional Engagement Program 3B	0	Semester 1 Semester 2

Note: -Candidates for the Bachelor of Engineering Honours must complete the Professional Engagement Program units of study.

- Candidates must enrol in ENGP1001 in their first semester of study

Block 4 - Civil Stream Core (Min CP: 96,Max CP: 96)

Unit Code	Unit Name	CP	Sessions Offered
CIVL1110	Materials	6	Semester 2 Int February
CIVL1802	Statics	6	Semester 1 Int January Int July
CIVL1810	Engineering Construction and Surveying	6	Semester 2
CIVL2010	Environmental Engineering	6	Semester 2
CIVL2201	Structural Mechanics	6	Semester 1
CIVL2410	Soil Mechanics 1	6	Semester 2
CIVL2611	Introductory Fluid Mechanics	6	Semester 2
CIVL2700	Transport Systems	6	Semester 1
CIVL2812	Project Appraisal	6	Semester 2
CIVL3205	Concrete Structures 1	6	Semester 1
CIVL3206	Steel Structures 1	6	Semester 2
CIVL3612	Fluid Mechanics	6	Semester 1
CIVL3811	Engineering Design and Construction	6	Semester 2
CIVL4903	Civil Engineering Design	6	Semester 1 Semester 2
GEOL1501	Engineering Geology 1	6	Semester 2
MATH2061	Linear Mathematics and Vector Calculus	6	Semester 1 Summer Main

Block 5 - Civil Stream Electives (Min CP: 30,Max CP: 30)

Unit Code	Unit Name	CP	Sessions Offered
CIVL3235	Structural Analysis	6	Semester 2
CIVL3310	Humanitarian Engineering	6	Semester 1
CIVL3411	Geotechnical Engineering 1	6	Semester 2
CIVL3511	Basics of Integrated Building Engineering	6	Semester 1
CIVL3614	Hydrology	6	Semester 2
CIVL3704	Transport Informatics	6	Semester 1
CIVL3705	Transport Design: Sustainable and Safe Access	6	Semester 1
CIVL3805	Project Scope, Time and Cost Management	6	Semester 1
CIVL4203	Major Industrial Project	24	Semester 1 Semester 2
CIVL4810	Mgmnt of People, Quality and Risk in PE	6	Semester 2
CIVL4813	Contracts Formulation and Management	6	Semester 2
CIVL4814	Project Procurement and Tendering	6	Semester 2
CIVL4815	Project Formulation	6	Semester 1
CIVL5266	Steel Structures - Stability	6	Semester 1
CIVL5269	Advanced Concrete Structures	6	Semester 2
CIVL5276	Bridge Engineering	6	Semester 1
CIVL5277	Structural Rehabilitation and Timber Design	6	Semester 2
CIVL5320	Engineering for Sustainable Development	6	Semester 2
CIVL5330	Global Engineering Field Work	6	Int July
CIVL5351	Geoenvironmental Engineering	6	Semester 2
CIVL5452	Geotechnical Engineering 2	6	Semester 1
CIVL5453	Geotechnical Hazards	6	Semester 2
CIVL5458	Numerical Methods in Civil Engineering	6	Semester 1
CIVL5460	Soil Mechanics 2	6	Semester 1
CIVL5531	Advanced Integrated Building Engineering	6	Semester 1
CIVL5533	Energy-efficient Building Systems	6	Semester 2
CIVL5535	Building Envelope and Adaptive Engineering	6	Semester 2
CIVL5665	Water Supply for Towns and Cities	6	Semester 2
CIVL5668	Fundamentals of Wind Engineering for Design	6	Semester 1
CIVL5670	Reservoir, Stream and Coastal Engineering	6	Semester 1
CIVL5701	Transport Networks	6	Semester 2
CIVL5702	Traffic Engineering	6	Semester 1
CIVL5703	Transport Policy, Planning and Deployment	6	Semester 1
CIVL5704	Transport Analytics	6	Semester 2
CIVL5999	Advanced Research and Analysis	6	Semester 1
ENGG3801	Industry and Community Project	6	Semester 1 Semester 2

Block 6 - 3000+ level Engineering units (Min CP: 12,Max CP: 12)

Note: Students must take 12 credit points of 3000+ level Engineering electives to complete the total number of credit points for their degree.

Students may take any 3000+ level unit of study offered by the Faculty of Engineering and available to undergraduate students, provided they satisfy any prerequisite, quota, departmental permission or any other requirement of the unit, and the units are not essentially the same or prohibited units for any of the other units in their degree.

Block 7 - Free Electives (Max CP: 6)

Note: Students may take 6 credit points of free electives to complete the total number of credit points for their degree. Students may take the following units of study as free electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculty of Engineering available to undergraduate students

(2) Any unit of study from Table S available to undergraduate students

Faculty of Engineering

Civil Engineering

Civil Engineering (2021)