Faculty of Engineering |
Course: | Mechanical / Science (2016) |
CP Required: | 240 |
Min FT Duration: | 5.00 Years |
Min PT Duration: | 5.00 Years |
Faculty/School: | Faculty of Engineering |
Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
Type | CP | CP From |
6 |
Select from
ENGG1801: Engineering Computing Note: Combined degree students wishing to major in Computer Science can replace ENGG1801 with INFO1103. INFO1103 is discontinued from 2018. Replacement unit is INFO1110. |
|
3 |
Select from
MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
|
6 |
Select from
Unit Block: Selected Junior Science Units Note: Science/Engineering(Hons) combined degrees require 240 credit points, comprising 96 credit points from Science subject areas, with a major in one Science discipline, plus units prescribed for the Engineering specialisation. Science units forming part of core requirements in the Mechanical Engineering specialisation may be counted as part of the 96 credit point Science requirement. Consult resolutions for Combined Engineering(Hons) /Science degree in Faculty handbooks for further details. |
|
6 |
Select from
MECH1560: Introduction to Mechanical Engineering |
|
3 |
Select from
MATH1002: Linear Algebra |
Note:
In the BE/BSc program the 12 cp of core subjects, MATH#### may count to both the Science and the Engineering degrees. For all subjects which fall in this category the student must fulfill the credit point requirements of the combined degree by completing additional Mechanical electives and/or Science subjects.
MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.
Type | CP | CP From |
3 |
Select from
MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
|
6 |
Select from
Unit Block: Selected Junior Science Units |
|
3 |
Select from
MATH1005: Statistical Thinking with Data |
|
6 |
Select from
ENGG1802: Engineering Mechanics |
|
6 |
Select from
AMME1362: Introduction to Engineering Materials |
Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.
Type | CP | CP From |
6 |
Select from
AMME2000: Engineering Analysis |
|
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units |
6 |
Select from
AMME2500: Engineering Dynamics |
|
6 |
Select from
AMME2261: Fluid Mechanics 1 |
Type | CP | CP From |
6 |
Select from
MECH2400: Mechanical Systems Design 1 |
|
6 |
Select from
AMME2301: Mechanics of Solids |
|
6 |
Select from
ENGG1111: Integrated Engineering 1 |
|
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units |
Note:
ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
6 |
Select from
AMME2700: Instrumentation |
|
6 |
Select from
AMME3500: System Dynamics and Control |
|
6 |
Select from
MECH3362: Engineering Materials for Adv Manufacturing |
|
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
Type | CP | CP From |
2 |
Select from
ENGG2111: Integrated Engineering 2 |
|
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
6 |
Select from
MECH3361: Mechanics of Solids 2 |
|
6 |
Select from
AMME2262: Introduction to Thermal Engineering |
Note:
ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
6 |
Select from
MECH3660: Manufacturing Engineering |
|
6 |
Select from
MECH3261: Fluid Mechanics 2 |
|
2 |
Select from
ENGG3111: Integrated Engineering 3 |
|
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
Note:
ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
6 |
Select from
MECH3460: Mechanical Systems Design 2 |
|
6 |
Select from
MECH3260: Thermal Engineering and Environment |
|
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
Type | CP | CP From |
2 |
Select from
ENGG4111: Integrated Engineering 4 |
|
0 |
Select from
ENGG4000: Practical Experience |
|
6 |
Select from
AMME4111: Thesis A |
|
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units or other units. |
6 |
Select from
Unit Block: Mechanical Specialist Electives Note: Combined BE(Mech)(Hons)/BSc students are required to complete a minimum of 12 cp of recommended Mechanical electives. These may be taken in either first or second semester. |
Note:
ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
6 |
Select from
AMME4112: Thesis B |
|
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units or other units. |
6 |
Select from
Unit Block: Mechanical Specialist Electives Note: Combined BE(Mech)(Hons)/BSc students are required to complete a minimum of 12 cp of recommended Mechanical electives. These may be taken in either first or second semester. |
Type | CP | CP From |
Note:
From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.
You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors
Type | CP | CP From |
Core
|
6 |
AMME5101: Energy and the Environment |
Core
|
6 |
AMME5202: Computational Fluid Dynamics Note: Taken as an additional Mechanical Specialist Elective |
Core
|
6 |
AMME5510: Vibration and Acoustics Note: Taken as an additional Mechanical Specialist Elective |
Core
|
6 |
MECH5275: Renewable Energy |
Type | CP | CP From |
Core
|
6 |
MECH3362: Engineering Materials for Adv Manufacturing |
Core
|
6 |
MECH5304: Materials Failure |
Core
|
6 |
MECH5305: Smart Materials |
Core
|
6 |
MECH5310: Advanced Engineering Materials Note: Taken as an Additional Mechanical Specialist Elective |
Note:
This major focuses on development of an understanding of the relationship between properties of materials and their relationship to engineering design. Concepts covered include: mechanical properties; fracture and fatigue mechanics; composite materials; ceramics and glasses; structure- property relationships; and selection of materials.
The major is available to students who complete the four units listed (24 cp).
Type | CP | CP From |
Core
|
6 |
AERO2705: Space Engineering 1 Note: Replacing ENGG1111 |
Core
|
6 |
AERO3760: Space Engineering 2 Note: Replacing MECH3460 |
Core
|
6 |
AERO4701: Space Engineering 3 |
6 |
Select from
Unit Block Space Specialist Electives |
Unit Code | Unit Name | CP | Sessions Offered |
AMME5101 | Energy and the Environment | 6 |
Semester 1 |
AMME5105 | Risk Management Analysis | 6 |
Semester 1 |
AMME5202 | Computational Fluid Dynamics | 6 |
Semester 1 |
AMME5271 | Computational Nanotechnology | 6 |
Semester 2 |
AMME5310 | Engineering Tribology | 6 |
Semester 1 |
AMME5510 | Vibration and Acoustics | 6 |
Semester 2 |
AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1 |
AMME5902 | Computer Aided Manufacturing | 6 |
Semester 2 |
AMME5912 | Crash Analysis and Design | 6 |
Semester 1 |
MECH4460 | Design of Micro- and Nanosystems | 6 |
Semester 1 |
MECH4660 | Engineering Management [not running in 2019] | 6 |
Semester 1 |
MECH4961 | Biomechanics and Biomaterials | 6 |
Semester 2 |
MECH5255 | Air Conditioning and Refrigeration | 6 |
Semester 2 |
MECH5265 | Combustion | 6 |
Semester 2 |
MECH5275 | Renewable Energy | 6 |
Semester 2 |
MECH5304 | Materials Failure | 6 |
Semester 2 |
MECH5305 | Smart Materials | 6 |
Semester 2 |
MECH5310 | Advanced Engineering Materials | 6 |
Semester 1 |
Note: This information is correct as of 2016. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note: This information is correct as of 2016. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note:
A total of 96 credits of Science or IT subject units, including a Science major sequence, must be completed as part of the combined Engineering/Science degree. Science units forming part of core requirements in the chosen engineering specialisation may be counted as part of the 96 credit point Science requirements. Consult resolutions for Combined Engineering /Science degree in Faculty handbooks for further details.
This information is correct as of 2016. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Unit Code | Unit Name | CP | Sessions Offered |
AERO4260 | Aerodynamics 2 | 6 |
Semester 1 |
AERO4360 | Aerospace Structures 2 | 6 |
Semester 1 |
AERO4560 | Flight Mechanics 2 | 6 |
Semester 2 |
AERO5700 | Space Engineering (Advanced) | 6 |
Semester 1 Semester 2 |
Unit Code | Unit Name | CP | Sessions Offered |
AMME4111 | Thesis A | 6 |
Semester 1 Semester 2 |
AMME4112 | Thesis B | 6 |
Semester 1 Semester 2 |
ENGG1111 | Integrated Engineering 1 | 6 |
Semester 1 |
ENGG2111 | Integrated Engineering 2 | 2 |
Semester 1 Semester 2 Int February |
ENGG3111 | Integrated Engineering 3 | 2 |
Semester 1 Semester 2 |
ENGG4000 | Practical Experience | 0 |
Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December |
ENGG4111 | Integrated Engineering 4 | 2 |
Semester 1 |
MATH1001 | Differential Calculus | 3 |
Semester 1 Summer Main |
MATH1002 | Linear Algebra | 3 |
Semester 1 Semester 2 Summer Main |
MATH1003 | Integral Calculus and Modelling | 3 |
Semester 2 Summer Main |
MATH1005 | Statistical Thinking with Data | 3 |
Semester 1 Semester 2 Int January |
Unit Code | Unit Name | CP | Sessions Offered |
AMME1362 | Introduction to Engineering Materials | 6 |
Semester 2 |
AMME2000 | Engineering Analysis | 6 |
Semester 1 |
AMME2261 | Fluid Mechanics 1 | 6 |
Semester 1 |
AMME2262 | Introduction to Thermal Engineering | 6 |
Semester 2 |
AMME2301 | Mechanics of Solids | 6 |
Semester 2 |
AMME2500 | Engineering Dynamics | 6 |
Semester 1 |
AMME2700 | Instrumentation | 6 |
Semester 1 |
AMME3500 | System Dynamics and Control | 6 |
Semester 1 |
ENGG1801 | Engineering Computing | 6 |
Semester 1 Int January |
ENGG1802 | Engineering Mechanics | 6 |
Semester 2 Summer Main Int January |
MECH1560 | Introduction to Mechanical Engineering | 6 |
Semester 1 |
MECH2400 | Mechanical Systems Design 1 | 6 |
Semester 1 |
MECH3260 | Thermal Engineering and Environment | 6 |
Semester 2 |
MECH3261 | Fluid Mechanics 2 | 6 |
Semester 1 |
MECH3361 | Mechanics of Solids 2 | 6 |
Semester 2 |
MECH3362 | Engineering Materials for Adv Manufacturing | 6 |
Semester 1 |
MECH3460 | Mechanical Systems Design 2 | 6 |
Semester 2 |
MECH3660 | Manufacturing Engineering | 6 |
Semester 1 |