1. Overview

Course:	Chemical & Biomolecular / Commerce (2016)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► 108 credit points of Chemical stream core units

Commerce:

► 96 credit points of Commerce units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Commerce

For the Bachelor of Commerce component of a combined degree:

(a) The units of study that may be taken are set out in the Table of Undergraduate Units of Study from The University of Sydney Business School.

(b) Candidates must complete 96 credit points of units of study selected from the Table of Undergraduate Units of Study from The University of Sydney Business School including:

(i) 36 credit points of core units of study (30 junior credit points and six senior credit points); and

(ii) a major; and

(iii) at least 48 credit points of 2000 and/or 3000 level units of study.

Candidates for the award of the Bachelor of Commerce (Honours) who do not meet the requirements, and who have not already graduated, will be awarded the Bachelor of Commerce pass degree.

Engineering Honours requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Note: ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.

Note: 1. Students are required to complete a total of 96 credit points of Commerce units. Units selected must include Junior Core requirements, a Commerce major sequence (36 credits minimum) and 48 credits at the senior level (2000 and above). See Streams/Majors tab above for details of available majors.

2. Up to 18 Credit Points may be taken as Junior Electives.

Note: 1. Combined degree students may choose to take Chemical Engineering Design A & B in the same year as Engineering Project/Honours Thesis, or separately across years 4 and 5 as preferred.

2. Top students may apply to undertake industry-based projects under the Major Industry Placement Scheme. MIPPS students take a single 24 credit points unit (CHNG4203) in place of Honours Thesis Units plus Chemical Engineering Design A and the 6 credit point Recommended Chemical and Biomolecular Electives. See Streams/Majors tab for more details of MIPPS. 12 credit points (two units) from the `Depth` units of study should also be taken in either first or second semester.

3. Some of the Commerce Junior Electives blocks (listed here) may be changed to Commerce Senior Electives.

4. ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.

Note: ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.

4. Pathways

Alternate Thesis Pathway : Major Industrial Project Placement Scheme (MIPPS)

Type	CP	CP From
Core	24	CHNG4203: Major Industrial Project

Note: MIPPS students take CHNG4203 Major Industrial Project Placement (24 credit points). This unit replaces regular Honours Thesis units (CHNG4811 and CHNG4812) along with CHNG4001 Practical Experience, CHNG4112 Foundation of Chemical Engineering Design A and 6 credit points of electives. Students are admitted to MIPPS by school permission only. Applications are taken in third year of study.

BCom Accounting Major

Type	CP	CP From
Core	6	ACCT1006: Accounting & Financial Management
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	BUSS1030: Accounting, Business and Society Note: Completed as part of Commerce core units.
Core	6	ACCT2011: Financial Accounting A
Core	6	ACCT2012: Management Accounting A
Commerce Senior Electives	24	Select from ACCT3011: Financial Accounting B ACCT3012: Management Accounting B ACCT3013: Financial Statement Analysis ACCT3014: Auditing and Assurance ACCT3031: International Corporate Governance ACCT3032: Current Issues in Management Accounting BUSS2100: Business Placement A (Internship) CLAW2201: Corporations Law Note: (a) BUSS2100 requires approval from the Discipline of Accounting before the unit can be included in the major. (b) CLAW2201 requires the completion of additional prerequisites outside the units listed for this major.

Note: Students undertaking a major in Accounting must complete the following units:

(1) Three prerequisite junior unit of study (6 credit points): ACCT1006, BUSS1020 and BUSS1030. BUSS1030 is a Commerce core unit and will have been completed by all Commerce students. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): ACCT2011 and ACCT2012.

(3) At least four (six credit point) units of study or equivalent (24 credit points) selected from the senior elective units list.

BCom Business Analytics

Type	CP	CP From
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	QBUS2310: Management Science
Core	6	QBUS2810: Statistical Modelling for Business
Commerce Senior Electives	24	Select from QBUS2320: Methods of Decision Analysis QBUS2330: Operations Management QBUS2350: Project Planning and Management QBUS2820: Predictive Analytics QBUS3310: Advanced Management Science QBUS3320: Supply Chain Management QBUS3810: Business Risk Analysis QBUS3820: Data Mining and Data Analysis QBUS3830: Advanced Analytics

Note: Students intending to complete a major in Business Analytics require the following units.

(1) One prerequisite junior unit of study (6 credit points): BUSS1020. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): QBUS2310,QBUS2810.

(3) A minimum of 24 credit points from the senior elective units list (minimum of four units), with at least 12 credit points (two units) at 3000-level.

Note that a number of the QBUS units are replacements for previous ECMT units. See Business School website for equivalences between new QBUS units and previous ECMT units at http://sydney.edu.au/business/currentstudents/undergraduate/curriculum_information/undergraduate_courses/changes_to_undergraduate_programs

BCom Business Information Systems Major

Type	CP	CP From
Core	6	INFS1000: Business Information Systems
Core	6	INFS2001: IS for Performance Improvement
Core	6	INFS2020: Business Process Modelling & Improvement
Commerce Senior Electives	24	Select from BUSS2100: Business Placement A (Internship) INFS2010: Digital Information Design & Management INFS2030: e-Business Management INFS3030: Information Protection and Assurance INFS3040: Enterprise Systems & Integrated Business INFS3050: Business Intelligence for Managers INFS3060: Managing Digital Innovation Projects INFS3070: Business Analysis in Practice INFS3080: Business Information Systems Project Note: BUSS2100 requires approval from the Discipline of Business Information Systems before the unit can be included in the major

Note: Students undertaking a major in Business Information Systems must complete the following.

(1) One prerequisite junior unit of study (6 credit points): INFS1000.

(2) Two compulsory senior units of study (12 credit points): INFS2001 and INFS2020.

(3) At least four elective units of study (24 credit points) selected from the senior elective units list, noting that the units listed above are those units which are being offered for the current year only.

BCom Commercial Law Major

Type	CP	CP From
Core	6	CLAW1001: Foundations of Business Law
Commerce Senior Electives	36	Select from BUSS2100: Business Placement A (Internship) CLAW2201: Corporations Law CLAW2202: Bankruptcy and Insolvency CLAW2203: Stock Markets and Derivatives Law CLAW2204: Banking and Finance Law CLAW2205: Trade Practices and Consumer Law CLAW2207: Legal Ethics and the Professions CLAW2208: Business Regulation, Risk and Compliance CLAW2209: Intellectual Property for Business CLAW2211: Commercial Practice in China CLAW2212: Franchising CLAW2213: Legal Regulation of Int`l Business CLAW3201: Australian Taxation System CLAW3202: Tax Strategies for Business CLAW3204: Capital Raising and Management CLAW3206: Regulation of Mergers and Acquisitions CLAW3207: Employment Regulation for Business CLAW3208: Corporate Crime and Business Note: BUSS2100 requires approval from the Discipline of Commercial Law before the unit can be included in the major.

Note: Students undertaking a major in Commercial law must complete the following.

(1) One prerequisite junior unit of study (6 credit points): CLAW1000.

(3) At least six elective units of study (36 credit points) selected from the senior elective units list.

BCom Econometrics Major

Type	CP	CP From
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	ECMT1020: Business and Economic Statistics B
Core	6	ECMT2150: Cross Section Econometrics
Core	6	ECMT2160: Time Series Econometrics
Commerce Senior Electives	24	Select from ECMT2120: Analysis of Discrete Choice Data ECMT2130: Financial Econometrics ECMT3120: Applied Econometrics ECMT3130: Forecasting for Economics and Business ECMT3150: The Econometrics of Financial Markets ECMT3160: Statistical Modelling ECMT3170: Computational Econometrics Note: ECMT2120, ECMT3160 and ECMT3170 are not offered in 2014.

Note: Students majoring in Econometrics must complete:

(1) Two prerequisite junior units of study (6 credit points): BUSS1020 (or pre-2012 unit ECMT1010) plus and ECMT1020. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): ECMT2150, ECMT2160.

(3) Four units (24 credit points) chosen from the Senior Commerce Electives.

Students considering Economics or Econometrics units as part of their combined engineering/commerce degree should observe the directions of the Business School handbook regarding the availability of these units for commerce combined students. Units and majors from the School of Economics (in the Faculty of Arts and Social Sciences) may be taken as part of the commerce combined degree, as well as units from the Business School, according to latest advice in Business School handbook at: http://sydney.edu.au/handbooks/business_school/subject_areas/subject_areas.shtml

BCom Economics Major

Type	CP	CP From
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	ECMT1020: Business and Economic Statistics B
Core	6	ECON1001: Introductory Microeconomics
Core	6	ECON1002: Introductory Macroeconomics
Core	6	ECOS2001: Intermediate Microeconomics Note: May be replaced by ECOS2901 Intermediate Microeconomics Honours.
Core	6	ECOS2002: Intermediate Macroeconomics Note: May be replaced by ECOS2902 Intermediate Macroeconomics Honours.
Commerce Senior Electives	24	Select from ECOS2025: East Asian Economies ECOS2201: Economics of Competition and Strategy ECOS2306: Managerial Firms: Evolution & Attributes ECOS2307: The European Economy ECOS2903: Mathematical Economics A ECOS3002: Development Economics ECOS3003: Hierarchies, Incentives & Firm Structure ECOS3004: History of Economic Thought ECOS3005: Industrial Organisation ECOS3006: International Trade ECOS3007: International Macroeconomics ECOS3008: Labour Economics ECOS3010: Monetary Economics ECOS3011: Public Finance ECOS3012: Strategic Behaviour ECOS3013: Economics of the Environment ECOS3015: Law and Economics ECOS3016: Experimental and Behavioural Economics ECOS3017: Health Economics ECOS3018: Economics of Growth ECOS3019: Capital and Dynamics ECOS3020: Special Topic in Economics ECOS3021: Business Cycles and Asset Markets ECOS3022: The Economics of Financial Markets ECOS3023: Personnel Economics ECOS3901: Advanced Microeconomics Honours ECOS3902: Advanced Macroeconomics Honours ECOS3903: Applied Economics ECOS3904: Applied Macroeconomics Honours Note: (a) Four units (24 credit points) must be completed from the units listed, with at least three at 3000-level (18 credit points). (b( ECOS2306 is not offered in 2014. (c) The units ECOS3901, ECOS3902, ECOS3903 and ECOS3904 require the completion of additional prerequisites/corequisites outside of the units of study listed for this major.

Note: Students majoring in Economics must complete:

(1) Four prerequisite junior unit of study (18 credit points): BUSS1020, ECMT1020, ECON1001 and ECON1002. Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Two compulsory senior units of study (12 credit points): ECOS2001, ECOS2002.

(3) At least four elective units of study (24 credit points) selected from the ECOS senior elective units listed, with at least three at 3000-level (18 credit points).

Students considering Economics or Econometrics units as part of their combined engineering/commerce degree are advised to observe the directions of the Business School handbook regarding the availability of these units for commerce combined students. Units and majors from the School of Economics (in the Faculty of Arts and Social Sciences) may be taken as part of the commerce combined degree, as well as units from the Business School, according to latest advice in Business School handbook at: http://sydney.edu.au/handbooks/business_school/subject_areas/subject_areas.shtml

BCom Finance Major

Type	CP	CP From
Core	6	BUSS1020: Quantitative Business Analysis Note: Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.
Core	6	FINC2011: Corporate Finance I
Core	6	FINC2012: Corporate Finance II
Core	6	FINC3017: Investments and Portfolio Management
Commerce Senior Electives	18	Select from BUSS2100: Business Placement A (Internship) FINC3011: International Financial Management FINC3012: Derivative Securities FINC3013: Mergers and Acquisitions FINC3014: Trading and Dealing in Security Markets FINC3015: Financial Valuation: Case Study Approach FINC3018: Bank Financial Management FINC3019: Fixed Income Securities FINC3020: Financial Risk Management FINC3021: Mathematical Finance FINC3022: Alternative Investments FINC3023: Behavioural Finance Note: (a) BUSS2100 requires approval from the Discipline of Finance before the unit can be included in the major.

Note: Students undertaking a major in Finance must complete the following.

(1) One junior prerequisite unit of study, BUSS1020 (6 credit points). Engineering/Commerce students are exempted from BUSS1020 once they have completed Engineering core unit MATH1005 and one other MATH unit.

(2) Three compulsory senior units of study (18 credit points): FINC2011, FINC2012, FINC3017.

(3) At least 18 credit points selected from the FINC senior electives list.

Commerce core unit BUSS1040 is assumed knowledge for the Finance major. It is strongly recommended that students complete BUSS1040 (or equivalent units) first in preparing for this major.

BCom Industrial Relations and Human Resource Management Major

Type	CP	CP From
Core	6	WORK1003: Foundations of Work and Employment
Core	6	WORK2203: Industrial Relations Policy
Core	6	WORK2205: Human Resource Processes
Commerce Senior Electives	24	Select from BUSS2100: Business Placement A (Internship) WORK2209: Organisational Analysis and Behaviour WORK2210: Strategic Management WORK2211: Human Resource Strategies WORK2217: International Human Resource Management WORK2218: People and Organisations WORK2219: Management and Organisational Ethics WORK2222: Leadership in Organisations WORK2227: Regulation at Work WORK3922: Organisational Research Methods Note: (a) BUSS2100 requires approval from the Discipline of Work and Organisational Studies before the unit can be included in the major.

Note: Students undertaking a major in Industrial Relations and Human Resource Management must complete the following.

(1) One junior prerequisite unit of study: WORK1003 (6 credit points).

(2) Two compulsory senior units of study (12 credit points): WORK2203, WORK2205.

(3) At least four elective units of study (24 credit points) selected from the WORK Senior Commerce Electives list.

BCom International Business Major

Type	CP	CP From
Core	6	IBUS2101: International Business Strategy
Core	6	IBUS2102: Cross-Cultural Management
Core	6	IBUS3101: International Business Alliances
Core	6	IBUS3102: International Risk Management
Commerce Senior Electives	12	Select from ACCT3031: International Corporate Governance BUSS2100: Business Placement A (Internship) CLAW2211: Commercial Practice in China FINC3011: International Financial Management IBUS3103: Global Entrepreneurship and Enterprise IBUS3104: Ethical International Business Decisions IBUS3107: Business Negotiations IBUS3108: Social Entrepreneurship MKTG3116: International Marketing WORK2217: International Human Resource Management WORK2222: Leadership in Organisations Note: BUSS2100 requires approval from the Discipline of International Business before the unit can be included in the major.

Note: For a major in International Business, students must complete a minimum 36 credit points in senior units of study comprising:

(1) Four compulsory senior units of study (24 credit points): IBUS2101, IBUS2102, IBUS3101, IBUS3102.

(2) At least two elective units of study (12 credit points) selected from the senior elective units list. Note that many senior elective units of study require the completion of additional prerequisites outside of those units listed for this major. Click on the individual unit for information about these. Students undertaking combined degrees will need to carefully consider prerequisite implications before selecting any of these units to ensure that they do not exceed the credit point limit for the BCom component.

BCom Management Major

Type	CP	CP From
Core	6	WORK2201: Foundations of Management
Core	6	WORK2210: Strategic Management
Core	6	WORK2218: People and Organisations
Commerce Senior Electives	18	Select from BUSS2100: Business Placement A (Internship) IBUS2102: Cross-Cultural Management IBUS3107: Business Negotiations QBUS2350: Project Planning and Management WORK2209: Organisational Analysis and Behaviour WORK2211: Human Resource Strategies WORK2217: International Human Resource Management WORK2219: Management and Organisational Ethics WORK2222: Leadership in Organisations WORK2227: Regulation at Work WORK3922: Organisational Research Methods Note: BUSS2100 requires approval from the Discipline of Work and Organisational Studies before the unit can be included in the major.

Note: For a major in Management, Engineering/Commerce combined degree students must complete the following.

(1) Three compulsory senior units of study (18 credit points): WORK2201, WORK2210, WORK2218.

(2) At least three units of study (18 credit points) selected from the senior elective units list.

Students taking this major must first have completed at least one of the core junior Bachelor of Commerce units as a prerequisite.

BCom Marketing Major

Type	CP	CP From
Core	6	MKTG1001: Marketing Principles
Core	6	MKTG2112: Consumer Behaviour
Core	6	MKTG2113: Marketing Research
Core	6	MKTG3118: Marketing Strategy and Planning
Commerce Senior Electives	18	Select from BUSS2100: Business Placement A (Internship) CLAW2212: Franchising MKTG3110: Electronic Marketing MKTG3112: Marketing Communications MKTG3114: New Products Marketing MKTG3116: International Marketing MKTG3117: Services Marketing MKTG3119: Public Relations Management MKTG3120: Building and Managing Brands MKTG3121: Advertising: Creative Principles Note: (a) BUSS2100 requires approval from the Discipline of Marketing before the unit can be included in the major.

Note: Students intending to complete a major in Marketing must complete the following.

(1) One prerequisite junior unit of study (12 credit points): MKTG1001.

(2) Three compulsory senior units of study (12 credit points): MKTG2112, MKTG2113, MKTG3118.

(3) At least three units of study (18 credit points) selected from the MKTG Senior Commerce Electives list.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AERO2711	Aerospace Engineering Project 1	6	Semester 1 Semester 2 Int February Int July
AERO3711	Aerospace Engineering Project 2	6	Semester 1 Semester 2 Int February Int July
AERO4711	Aerospace Engineering Project 3	6	Semester 1 Semester 2 Int February Int July
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1061	Advanced Engineering 1	6	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2062	Engineering Project: Business Plan 2 Adv	6	Semester 2
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3062	Technology Education (Advanced)	6	Semester 2
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4000	Practical Experience	0	Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
ENGG4064	Advanced Engineering Design A	6	Semester 2 Int July
ENGG4065	Advanced Engineering Design B	6	Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
MATH1001	Differential Calculus	3	Semester 1 Summer Main
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1003	Integral Calculus and Modelling	3	Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1901	Differential Calculus (Advanced)	3	Semester 1
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1903	Integral Calculus and Modelling Advanced	3	Semester 2
MATH1905	Statistics (Advanced)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGG4000 Practical Experience (0cp)

- Exactly 6cp from ENGG1111 Integrated Engineering 1 (6cp) OR ENGG1061 Advanced Engineering 1A (6cp) (see note 1)

- At least 2cp from ENGG2xxx Integrated Engineering 2 (2cp) OR ENGG2062 Engineering Project Business Plan 2 Adv (6cp) (see note 1) OR AERO2711 Aerospace Engineering Project 1 (see note 1)

- At least 2cp from ENGG3xxx Integrated Engineering 3 (2cp) OR ENGG3062 Technology Education (Advanced) (6cp) (see note 1) OR AERO3711 Advanced Aerospace Project 2 (see note 1)

- At least 2cp from ENGG4xxx Integrated Engineering 4 (2cp) OR ENGG4064 Advanced Engineering Design A (6cp) (see note 1) OR ENGG4065 Advanced Engineering Design B (6cp) (see note 1) OR AERO4711 Advanced Aerospace Project 3 (see note 1)

- Exactly 12cp of MATH1xxxx units: MATH1001 Differential Calculus (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1003 Integral Calculus AND Modelling (3cp) MATH1005 Statistics (3cp)

- A minimum of 12cp of (see notes 2,3) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 hesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. The Advanced Engineering units are only available to students who have been accepted into the relevant year of the Advanced Engineering program.

Note 2. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - CBE Core (Min CP: 108,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
CHEM1101	Chemistry 1A	6	Semester 1 Semester 2 Summer Main
CHEM1102	Chemistry 1B	6	Semester 1 Semester 2 Summer Main
CHNG1103	Conservation of Mass and Energy	6	Semester 2
CHNG2801	Fluid Mechanics	6	Semester 1
CHNG2802	Chemical Engineering Modelling and Analysis	6	Semester 1
CHNG2803	Heat and Mass Transfer	6	Semester 1
CHNG2804	Chemical Engineering Thermodynamics	6	Semester 2
CHNG2805	Engineering for a Sustainable Society	6	Semester 2
CHNG2806	Separation Processes	6	Semester 2
CHNG3801	Process Plant Design	6	Semester 2
CHNG3802	Process Dynamics and Control	6	Semester 1
CHNG3803	Reaction Engineering	6	Semester 1
CHNG3805	Particle Processing	6	Semester 1
CHNG3806	Risk Management for Chemical Engineering	6	Semester 2
CHNG3807	Products and Value Chains [not running in 2020]	6	Semester 2
CHNG4802	Chemical Engineering Design A	6	Semester 1
CHNG4806	Chemical Engineering Design B	6	Semester 2
ENGG1801	Engineering Computing	6	Semester 1 Int January

Block 3 - Commerce Core (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
BUSS1000	Future of Business	6	Semester 1 Semester 2
BUSS1001	Understanding Business	6	Semester 1 Semester 2 Summer Late
BUSS1002	The Business Environment	6	Semester 1 Semester 2
BUSS1030	Accounting, Business and Society	6	Semester 1 Semester 2
BUSS1040	Economics for Business Decision Making	6	Semester 1 Semester 2
BUSS2000	Leading and Influencing in Business	6	Semester 1 Semester 2
BUSS3500	Integrated Business Applications	6	Semester 1 Semester 2 Summer Main Summer Late

Note: You must complete BUSS1000 in your first semester of enrolment. BUSS1000 replaces BUSS1001 from 2017. Students who have not successfully completed BUSS1001 must complete BUSS1000.

BUSS2000 will be run from 2018.

After Semester1, 2017 BUSS1002 will no longer be offered. Students who have not successfully completed BUSS1002 must replace this unit with one of the following Business School units: ACCT1006, CLAW1001, INFS1000, MKTG1001 or WORK1003.

BUSS3500, senior capstone unit for the Commerce component of the combined degree, has been discontinued and will be available for the last time in an intensive February session in 2017. If you have not completed the unit by this time, you must select an additional senior Commerce elective to replace it.

Block 6 - Commerce Junior Electives (Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
ACCT1006	Accounting & Financial Management	6	Semester 1 Semester 2
CLAW1001	Foundations of Business Law	6	Semester 1 Semester 2 Summer Early
ECMT1020	Business and Economic Statistics B	6	Semester 1 Semester 2 Summer Main
ECON1002	Introductory Macroeconomics	6	Semester 1 Semester 2 Summer Main
INFS1000	Business Information Systems	6	Semester 1 Semester 2 Winter Main Summer Early Summer Main Summer Late
MKTG1001	Marketing Principles	6	Semester 1 Semester 2
WORK1003	Foundations of Work and Employment	6	Semester 1 Semester 2

Note: This information is correct as of 2016. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.

Block 7 - Commerce Senior Electives (Min CP: 54,Max CP: 72)

Unit Code	Unit Name	CP	Sessions Offered
ACCT2011	Financial Accounting A	6	Semester 1 Semester 2
ACCT2012	Management Accounting A	6	Semester 1 Semester 2
ACCT3011	Financial Accounting B	6	Semester 1 Semester 2
ACCT3012	Management Accounting B	6	Semester 1 Semester 2
ACCT3013	Financial Statement Analysis	6	Semester 1
ACCT3014	Auditing and Assurance	6	Semester 1 Semester 2
ACCT3031	International Corporate Governance	6	Semester 2
ACCT3032	Current Issues in Management Accounting	6	Semester 1
BUSS2100	Business Placement A (Internship)	6	Semester 1 Semester 2 Int January Int February Int March Int June Int July Int November Int December
BUSS2200	Business Placement B (Internship)	6	Semester 1 Semester 2 Int January Int February Int March Int June Int July Int November Int December
BUSS2220	Small Business Structures and Taxation	6	Semester 1 Semester 2
BUSS2500	Washington D.C. Placement Program	6	Semester 1 Semester 2 Int February
BUSS2501	LA Placement Program	6	Semester 1 Semester 2 Int January Int February
BUSS2502	Paris Placement Program	6	Semester 2 Int July
BUSS2503	Community Placement	6	Semester 1 Semester 2 Int January Int February Int March Int July Int December
BUSS3100	Business Placement C (Internship)	6	Semester 1 Semester 2 Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
CLAW2201	Corporations Law	6	Semester 1 Semester 2
CLAW2202	Bankruptcy and Insolvency	6	Semester 1 Semester 2
CLAW2203	Stock Markets and Derivatives Law	6	Semester 1 Semester 2
CLAW2204	Banking and Finance Law	6	Semester 1 Semester 2
CLAW2205	Trade Practices and Consumer Law	6	Semester 1 Semester 2
CLAW2207	Legal Ethics and the Professions	6	Semester 1 Semester 2
CLAW2208	Business Regulation, Risk and Compliance	6	Semester 2
CLAW2209	Intellectual Property for Business	6	Semester 1 Semester 2
CLAW2211	Commercial Practice in China	6	Semester 1 Semester 2
CLAW2212	Franchising	6	Semester 1
CLAW2213	Legal Regulation of Int`l Business	6	Semester 1
CLAW3201	Australian Taxation System	6	Semester 1 Semester 2
CLAW3202	Tax Strategies for Business	6	Semester 2
CLAW3204	Capital Raising and Management	6	Semester 1 Semester 2
CLAW3206	Regulation of Mergers and Acquisitions	6	Semester 2
CLAW3207	Employment Regulation for Business	6	Semester 1
CLAW3208	Corporate Crime and Business	6	Semester 2
ECMT2110	Regression Modelling	6	Semester 1 Semester 2
ECMT2120	Analysis of Discrete Choice Data	6	Semester 2
ECMT2130	Financial Econometrics	6	Semester 2
ECMT2150	Cross Section Econometrics	6	Semester 1
ECMT2160	Time Series Econometrics	6	Semester 2
ECMT2620	Management Science	6	Semester 2
ECMT2630	Managerial Decision Making	6	Semester 1
ECMT2640	Operations Management	6	Semester 1
ECMT3110	Econometric Models and Methods	6	Semester 1
ECMT3120	Applied Econometrics	6	Semester 2
ECMT3130	Forecasting for Economics and Business	6	Semester 2
ECMT3150	The Econometrics of Financial Markets	6	Semester 1
ECMT3160	Statistical Modelling	6
ECMT3170	Computational Econometrics	6	Semester 2
ECMT3180	Business Risk Management	6	Semester 1 Semester 2
ECMT3610	Management Science Models and Methods	6	Semester 1
ECMT3620	Stochastic Modelling for Management	6
ECMT3640	Project Planning and Management	6	Semester 2
ECOS2001	Intermediate Microeconomics	6	Semester 1 Semester 2 Summer Main
ECOS2002	Intermediate Macroeconomics	6	Semester 1 Semester 2 Summer Main
ECOS2025	East Asian Economies	6	Semester 2
ECOS2201	Economics of Competition and Strategy	6	Semester 1
ECOS2306	Managerial Firms: Evolution & Attributes	6	Semester 2
ECOS2307	The European Economy	6	Semester 1
ECOS2551	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS2552	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS2901	Intermediate Microeconomics Honours	6	Semester 1
ECOS2902	Intermediate Macroeconomics Honours	6	Semester 2
ECOS2903	Mathematical Economics A	6	Semester 1
ECOS3002	Development Economics	6	Semester 2
ECOS3003	Hierarchies, Incentives & Firm Structure	6	Semester 2
ECOS3004	History of Economic Thought	6	Semester 2
ECOS3005	Industrial Organisation	6	Semester 1 Semester 2
ECOS3006	International Trade	6	Semester 1 Semester 2
ECOS3007	International Macroeconomics	6	Semester 1 Summer Main
ECOS3008	Labour Economics	6	Semester 1
ECOS3009	Markets, Regulation and Government Policy	6
ECOS3010	Monetary Economics	6	Semester 1
ECOS3011	Public Finance	6	Semester 2
ECOS3012	Strategic Behaviour	6	Semester 1 Summer Main
ECOS3013	Economics of the Environment	6	Semester 2
ECOS3015	Law and Economics	6	Semester 2
ECOS3016	Experimental and Behavioural Economics	6	Semester 2
ECOS3017	Health Economics	6	Semester 1
ECOS3018	Economics of Growth	6	Semester 2
ECOS3019	Capital and Dynamics	6	Semester 1
ECOS3020	Special Topic in Economics	6	Semester 1 Semester 2
ECOS3021	Business Cycles and Asset Markets	6	Semester 2
ECOS3022	The Economics of Financial Markets	6	Semester 1
ECOS3023	Personnel Economics	6
ECOS3551	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS3552	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS3553	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS3554	Economics Exchange	6	S2 Late Int S1 Late Int
ECOS3901	Advanced Microeconomics Honours	6	Semester 1
ECOS3902	Advanced Macroeconomics Honours	6	Semester 2
ECOS3903	Applied Economics	6	Semester 2
ECOS3904	Applied Macroeconomics Honours	6
FINC2011	Corporate Finance I	6	Semester 1 Semester 2 Winter Main Summer Early Summer Main Summer Late
FINC2012	Corporate Finance II	6	Semester 1 Semester 2 Summer Early Summer Main
FINC3011	International Financial Management	6	Semester 1
FINC3012	Derivative Securities	6	Semester 2
FINC3013	Mergers and Acquisitions	6	Semester 2
FINC3014	Trading and Dealing in Security Markets	6	Semester 2
FINC3015	Financial Valuation: Case Study Approach	6	Semester 1
FINC3017	Investments and Portfolio Management	6	Semester 1 Semester 2 Summer Main
FINC3018	Bank Financial Management	6	Semester 2
FINC3019	Fixed Income Securities	6	Semester 1 Semester 2
FINC3020	Financial Risk Management	6	Semester 2
FINC3021	Mathematical Finance	6	Semester 1
FINC3022	Alternative Investments	6	Semester 1
FINC3023	Behavioural Finance	6	Semester 1
IBUS2101	International Business Strategy	6	Semester 1 Semester 2 Summer Main Summer Late
IBUS2102	Cross-Cultural Management	6	Semester 1 Semester 2 Summer Early Summer Main
IBUS3101	International Business Alliances	6	Semester 1
IBUS3102	International Risk Management	6	Semester 2
IBUS3103	Global Entrepreneurship and Enterprise	6	Semester 1 Semester 2
IBUS3104	Ethical International Business Decisions	6	Semester 2
IBUS3106	International Business Special Project	6	Semester 1 Semester 2 Int January Int July
IBUS3107	Business Negotiations	6	Semester 1 Semester 2
IBUS3108	Social Entrepreneurship	6	Semester 1
INFS2001	IS for Performance Improvement	6	Semester 1 Semester 2 Summer Early
INFS2010	Digital Information Design & Management	6	Semester 1 Semester 2
INFS2020	Business Process Modelling & Improvement	6	Semester 2
INFS2030	e-Business Management	6	Semester 1 Semester 2
INFS3030	Information Protection and Assurance	6	Semester 2
INFS3040	Enterprise Systems & Integrated Business	6	Semester 1
INFS3050	Business Intelligence for Managers	6	Semester 1 Semester 2
INFS3060	Managing Digital Innovation Projects	6	Semester 1 Semester 2
INFS3070	Business Analysis in Practice	6	Semester 1
INFS3080	Business Information Systems Project	6	Semester 1 Semester 2
MKTG2112	Consumer Behaviour	6	Semester 2
MKTG2113	Marketing Research	6	Semester 1 Semester 2
MKTG3110	Electronic Marketing	6	Semester 2
MKTG3112	Marketing Communications	6	Semester 2
MKTG3114	New Products Marketing	6	Semester 2
MKTG3116	International Marketing	6	Semester 1
MKTG3117	Services Marketing	6	Semester 1
MKTG3118	Marketing Strategy and Planning	6	Semester 2
MKTG3119	Public Relations Management	6	Semester 2
MKTG3120	Building and Managing Brands	6	Semester 1
MKTG3121	Advertising: Creative Principles	6	Semester 1
QBUS2310	Management Science	6	Semester 2
QBUS2320	Methods of Decision Analysis	6	Semester 1
QBUS2330	Operations Management	6	Semester 1
QBUS2350	Project Planning and Management	6	Semester 2
QBUS2810	Statistical Modelling for Business	6	Semester 1
QBUS2820	Predictive Analytics	6	Semester 2
QBUS3310	Advanced Management Science	6	Semester 1
QBUS3320	Supply Chain Management	6	Semester 1 Semester 2
QBUS3810	Business Risk Analysis	6	Semester 1
QBUS3820	Data Mining and Data Analysis	6	Semester 2
QBUS3830	Advanced Analytics	6	Semester 1
WORK2201	Foundations of Management	6	Semester 1
WORK2203	Industrial Relations Policy	6	Semester 1 Semester 2
WORK2205	Human Resource Processes	6	Semester 1 Semester 2
WORK2209	Organisational Analysis and Behaviour	6	Semester 1 Semester 2
WORK2210	Strategic Management	6	Semester 1 Semester 2
WORK2211	Human Resource Strategies	6	Semester 2
WORK2217	International Human Resource Management	6	Semester 1 Semester 2
WORK2218	People and Organisations	6	Semester 1 Semester 2
WORK2219	Management and Organisational Ethics	6	Semester 2
WORK2222	Leadership in Organisations	6	Semester 1 Semester 2
WORK2227	Regulation at Work	6	Semester 1
WORK3922	Organisational Research Methods	6	Semester 2

Note: This information is correct as of 2016. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.