Faculty of EngineeringSchool of Civil Engineering |
Course: | Civil / Science (2016) |
CP Required: | 240 |
Min FT Duration: | 5.00 Years |
Min PT Duration: | N/A |
Faculty/School: | School of Civil Engineering |
Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
Type | CP | CP From |
3 |
Select from
MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
|
6 |
Select from
CIVL1900: Introduction to Civil Engineering |
|
6 |
Select from
Unit Block: Science |
|
6 |
Select from
ENGG1111: Integrated Engineering 1 |
|
3 |
Select from
MATH1002: Linear Algebra |
Note:
In the BE/BSc program the 24 cp of core subjects MATH#### and GEOL1501 may count to both the Science and the Engineering degrees. For all subjects which fall in this category the student must fulfill credit point requirements of the combined degree by completing additional Civil electives and/or Science subjects.
ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.
Type | CP | CP From |
3 |
Select from
MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
|
6 |
Select from
ENGG1802: Engineering Mechanics Note: From 2018, this unit is not available to Civil stream students. Replacement unit is CIVL1802. |
|
6 |
Select from
Unit Block: Science |
|
6 |
Select from
GEOL1501: Engineering Geology 1 |
|
3 |
Select from
MATH1005: Statistical Thinking with Data |
Note:
GEOL1501 does not count for credit with GEOS1003 or GEOS1903. Students enrolled in a Science major which requires GEOS1003 or GEOS1903 are exempt from GEOL1501 and must instead complete an additional unit from the list of Civil electives.
MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.
Type | CP | CP From |
6 |
Select from
Unit Block: Science |
|
6 |
Select from
ENGG1801: Engineering Computing |
|
6 |
Select from
CIVL2201: Structural Mechanics |
|
6 |
Select from
CIVL2110: Materials |
Type | CP | CP From |
2 |
Select from
ENGG2111: Integrated Engineering 2 |
|
6 |
Select from
Unit Block: Science |
|
6 |
Select from
CIVL2812: Project Appraisal |
|
6 |
Select from
CIVL2010: Environmental Engineering |
|
6 |
Select from
CIVL1810: Engineering Construction and Surveying |
Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.
Type | CP | CP From |
6 |
Select from
Unit Block: Science |
|
6 |
Select from
Unit Block: Science |
|
6 |
Select from
CIVL2700: Transport Systems |
|
6 |
Select from
MATH2061: Linear Mathematics and Vector Calculus |
Type | CP | CP From |
6 |
Select from
Unit Block: Science |
|
6 |
Select from
Unit Block: Science |
|
6 |
Select from
CIVL2410: Soil Mechanics 1 |
|
6 |
Select from
CIVL2611: Introductory Fluid Mechanics |
Type | CP | CP From |
6 |
Select from
Unit Block: Science |
|
6 |
Select from
CIVL3612: Fluid Mechanics |
|
6 |
Select from
CIVL3205: Concrete Structures 1 |
|
2 |
Select from
ENGG3111: Integrated Engineering 3 |
|
6 |
Select from
Unit Block: Science |
Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.
Type | CP | CP From |
6 |
Select from
Unit Block: Science |
|
6 |
Select from
CIVL3206: Steel Structures 1 |
|
6 |
Select from
CIVL3811: Engineering Design and Construction |
|
6 |
Select from
Unit Block: Science |
Type | CP | CP From |
2 |
Select from
ENGG4111: Integrated Engineering 4 |
|
6 |
Select from
CIVL4903: Civil Engineering Design |
|
6 |
Select from
CIVL4022: Thesis A |
|
0 |
Select from
ENGG4000: Practical Experience |
|
List
|
12 |
Select from
Unit Blocks: Science Civil Specialist - Breadth Civil Specialist - Depth Note: Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Civil units. |
Note: ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.
Type | CP | CP From |
6 |
Select from
CIVL4023: Thesis B |
|
List
|
12 |
Select from
Unit Blocks: Science Civil Specialist - Breadth Civil Specialist - Depth Note: Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Civil units. |
Type | CP | CP From |
Note:
From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.
You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors
Note:
An additional 6 Credit points must be taken from:
A maximum of 6cp from any other CIVL3####, CIVL4#### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)
Note:
An additional 6 Credit points must be taken from:
A maximum of 6cp from any other CIVL3####, CIVL4#### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)
Note:
An additional 6 Credit points must be taken from:
A maximum of 6cp from any other CIVL3####, CIVL4#### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)
Type | CP | CP From |
Core
|
6 |
ASNS2665: Understanding Southeast Asia Note: Students may take PMGT3857, EDUF3026, ITLS6007 or HSBH3009 instead of ASNS2665 as part of the Humanitarian Engineering major |
Core
|
6 |
CIVL3310: Humanitarian Engineering |
Core
|
6 |
CIVL5320: Engineering for Sustainable Development |
Core
|
6 |
CIVL5330: Global Engineering Field Work Note: Students may take SLIC3000 or SLIC4000 instead of CIVL5330 as part of the Humanitarian Engineering major |
Note:
An additional 6 Credit points must be taken from:
A maximum of 6cp from any other CIVL3####, CIVL4#### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)
Type | CP | CP From |
Core
|
6 |
CIVL3703: Transport Policy, Planning and Deployment |
6 |
Select from
CIVL5701: Transport Networks |
|
6 |
Select from
CIVL5702: Traffic Engineering |
Note:
An additional 6 Credit points must be taken from:
A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)
Unit Code | Unit Name | CP | Sessions Offered |
AERO2711 | Aerospace Engineering Project 1 | 6 |
Semester 1 Semester 2 Int February Int July |
AERO3711 | Aerospace Engineering Project 2 | 6 |
Semester 1 Semester 2 Int February Int July |
AERO4711 | Aerospace Engineering Project 3 | 6 |
Semester 1 Semester 2 Int February Int July |
AMME4010 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
AMME4111 | Thesis A | 6 |
Semester 1 Semester 2 |
AMME4112 | Thesis B | 6 |
Semester 1 Semester 2 |
CHNG4203 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
CHNG4811 | Thesis A | 6 |
Semester 1 Semester 2 |
CHNG4812 | Thesis B | 6 |
Semester 1 Semester 2 |
CIVL4022 | Thesis A | 6 |
Semester 1 Semester 2 |
CIVL4023 | Thesis B | 6 |
Semester 1 Semester 2 |
ELEC4712 | Thesis A | 6 |
Semester 1 Semester 2 |
ELEC4713 | Thesis B | 6 |
Semester 1 Semester 2 |
ELEC4714 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
ENGG1061 | Advanced Engineering 1 | 6 |
Semester 1 Semester 2 |
ENGG1111 | Integrated Engineering 1 | 6 |
Semester 1 |
ENGG2062 | Engineering Project: Business Plan 2 Adv | 6 |
Semester 2 |
ENGG2111 | Integrated Engineering 2 | 2 |
Semester 1 Semester 2 Int February |
ENGG3062 | Technology Education (Advanced) | 6 |
Semester 2 |
ENGG3111 | Integrated Engineering 3 | 2 |
Semester 1 Semester 2 |
ENGG4000 | Practical Experience | 0 |
Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December |
ENGG4064 | Advanced Engineering Design A | 6 |
Semester 2 Int July |
ENGG4065 | Advanced Engineering Design B | 6 |
Semester 2 |
ENGG4111 | Integrated Engineering 4 | 2 |
Semester 1 |
MATH1001 | Differential Calculus | 3 |
Semester 1 Summer Main |
MATH1002 | Linear Algebra | 3 |
Semester 1 Semester 2 Summer Main |
MATH1003 | Integral Calculus and Modelling | 3 |
Semester 2 Summer Main |
MATH1005 | Statistical Thinking with Data | 3 |
Semester 1 Semester 2 Int January |
MATH1901 | Differential Calculus (Advanced) | 3 |
Semester 1 |
MATH1902 | Linear Algebra (Advanced) | 3 |
Semester 1 |
MATH1903 | Integral Calculus and Modelling Advanced | 3 |
Semester 2 |
MATH1905 | Statistics (Advanced) | 3 |
Semester 2 |
Note:
Complete a minimum of 36cp including:
- ENGG4000 Practical Experience (0cp)
- Exactly 6cp from ENGG1111 Integrated Engineering 1 (6cp) OR ENGG1061 Advanced Engineering 1A (6cp) (see note 1)
- At least 2cp from ENGG2xxx Integrated Engineering 2 (2cp) OR ENGG2062 Engineering Project Business Plan 2 Adv (6cp) (see note 1) OR AERO2711 Aerospace Engineering Project 1 (see note 1)
- At least 2cp from ENGG3xxx Integrated Engineering 3 (2cp) OR ENGG3062 Technology Education (Advanced) (6cp) (see note 1) OR AERO3711 Advanced Aerospace Project 2 (see note 1)
- At least 2cp from ENGG4xxx Integrated Engineering 4 (2cp) OR ENGG4064 Advanced Engineering Design A (6cp) (see note 1) OR ENGG4065 Advanced Engineering Design B (6cp) (see note 1) OR AERO4711 Advanced Aerospace Project 3 (see note 1)
- Exactly 12cp of MATH1xxxx units: MATH1001 Differential Calculus (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1003 Integral Calculus AND Modelling (3cp) MATH1005 Statistics (3cp)
- A minimum of 12cp of (see notes 2,3) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 hesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)
Note 1. The Advanced Engineering units are only available to students who have been accepted into the relevant year of the Advanced Engineering program.
Note 2. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.
Unit Code | Unit Name | CP | Sessions Offered |
CIVL1810 | Engineering Construction and Surveying | 6 |
Semester 2 |
CIVL1900 | Introduction to Civil Engineering | 6 |
Semester 1 |
CIVL2010 | Environmental Engineering | 6 |
Semester 2 |
CIVL2110 | Materials | 6 |
Semester 1 Semester 2 |
CIVL2201 | Structural Mechanics | 6 |
Semester 1 |
CIVL2410 | Soil Mechanics 1 | 6 |
Semester 2 |
CIVL2611 | Introductory Fluid Mechanics | 6 |
Semester 2 |
CIVL2700 | Transport Systems | 6 |
Semester 1 |
CIVL2812 | Project Appraisal | 6 |
Semester 2 |
CIVL3205 | Concrete Structures 1 | 6 |
Semester 1 |
CIVL3206 | Steel Structures 1 | 6 |
Semester 2 |
CIVL3612 | Fluid Mechanics | 6 |
Semester 1 |
CIVL3811 | Engineering Design and Construction | 6 |
Semester 2 |
CIVL4903 | Civil Engineering Design | 6 |
Semester 1 Semester 2 |
ENGG1801 | Engineering Computing | 6 |
Semester 1 Int January |
ENGG1802 | Engineering Mechanics | 6 |
Semester 2 Summer Main Int January |
GEOL1501 | Engineering Geology 1 | 6 |
Semester 2 |
MATH2061 | Linear Mathematics and Vector Calculus | 6 |
Semester 1 Summer Main |
Note: Candidates must complete 96 credit points of Science study, including at least one major in a Science subject area. Math and Geology units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/
Unit Code | Unit Name | CP | Sessions Offered |
CIVL3235 | Structural Analysis | 6 |
Semester 2 |
CIVL3411 | Geotechnical Engineering 1 | 6 |
Semester 2 |
CIVL3614 | Hydrology | 6 |
Semester 2 |
CIVL3703 | Transport Policy, Planning and Deployment | 6 |
Semester 1 |
CIVL3805 | Project Scope, Time and Cost Management | 6 |
Semester 1 |
Unit Code | Unit Name | CP | Sessions Offered |
CIVL4810 | Mgmnt of People, Quality and Risk in PE | 6 |
Semester 2 |
CIVL4813 | Contracts Formulation and Management | 6 |
Semester 2 |
CIVL4814 | Project Procurement and Tendering | 6 |
Semester 2 |
CIVL4815 | Project Formulation | 6 |
Semester 1 |
CIVL5266 | Steel Structures - Stability | 6 |
Semester 1 |
CIVL5269 | Advanced Concrete Structures | 6 |
Semester 2 |
CIVL5277 | Structural Rehabilitation and Timber Design | 6 |
Semester 2 |
CIVL5320 | Engineering for Sustainable Development | 6 |
Semester 2 |
CIVL5351 | Geoenvironmental Engineering | 6 |
Semester 2 |
CIVL5453 | Geotechnical Hazards | 6 |
Semester 2 |
CIVL5458 | Numerical Methods in Civil Engineering | 6 |
Semester 1 |
CIVL5668 | Fundamentals of Wind Engineering for Design | 6 |
Semester 1 |
CIVL5670 | Reservoir, Stream and Coastal Engineering | 6 |
Semester 1 |
CIVL5701 | Transport Networks | 6 |
Semester 2 |
CIVL5702 | Traffic Engineering | 6 |
Semester 1 |
CIVL5999 | Advanced Research and Analysis | 6 |
Semester 1 |