Note: This course version is currently under review and is subject to change.
ProgramsEngENGI (UG)BEHonsS2 EntryAeronautical Engineering (mid-year) (2019)
Show information forcommencing students (ie. started First Year then).
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 3 | MATH1005: Statistical Thinking with Data | |
| 3 | MATH1021: Calculus of One Variable | |
| 6 | ENGG1802: Engineering Mechanics | |
| 6 | AMME1362: Introduction to Engineering Materials | |
| 6 | AERO1400: Intro to Aircraft Construction and Design | |
| 0 | ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024
Year 2 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 3 | MATH1023: Multivariable Calculus and Modelling | |
| 6 | ENGG1111: Integrated Engineering 1 | |
| 3 | MATH1002: Linear Algebra | |
| 6 | AERO1560: Introduction to Aerospace Engineering | |
| 6 | ENGG1801: Engineering Computing |
Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024
Year 2 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 2 | ENGG2111: Integrated Engineering 2 | |
| 6 | AERO2703: Aircraft Performance and Operations | |
| 6 | AMME2262: Introduction to Thermal Engineering | |
| 6 | MECH2400: Mechanical Systems Design 1 | |
| 6 | AMME2301: Mechanics of Solids |
Year 3 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | AMME2261: Fluid Mechanics 1 | |
| 6 | AMME2500: Engineering Dynamics | |
| 6 | Select from AMME2000: Engineering Analysis or other units. | |
| 6 | AMME2700: Instrumentation Note: AMME2700 will be discontinued from 2024. Students who have not yet completed this unit should take AMME1705 in its place. |
Year 3 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Select from AERO3465: Aerospace Design 2 or other units. | |
| 6 | Select from AMME3060: Engineering Methods or other units. | |
| 6 | AERO3260: Aerodynamics 1 | |
| 6 | AERO3560: Flight Mechanics 1 | |
| 0 | ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Year 4 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 2 | ENGG3111: Integrated Engineering 3 | |
| 6 | AERO3261: Propulsion | |
| 6 | AERO3360: Aerospace Structures 1 | |
| 6 | AERO3460: Aerospace Design 1 | |
| 6 | AMME3500: System Dynamics and Control |
Year 4 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Select from AERO4560: Flight Mechanics 2 or other units. Note: At least two units must be completed from AERO4360 (Semester 1) or AERO4560 (Semester 2) or AERO4260 (Semester 1). | |
| 6 | Aeronautical Specialist Electives | |
| 6 | AMME4111: Thesis A | |
| 0 | ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Year 5 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 2 | ENGG4111: Integrated Engineering 4 | |
| 6 | Select from AERO4260: Aerodynamics 2 AERO4360: Aerospace Structures 2 Note: At least two units must be completed from AERO4360 (Semester 1) or AERO4560 (Semester 2) or AERO4260 (Semester 1). | |
| 6 | AERO4460: Aerospace Design 3 | |
| 6 | Aeronautical Specialist Electives | |
| 6 | AMME4112: Thesis B |
Additional Requirements for Major
| Type | CP | CP From |
| 24 | Select from AMME4111: Thesis A AMME4112: Thesis B MATH1002: Linear Algebra MATH1005: Statistical Thinking with Data MATH1021: Calculus of One Variable MATH1023: Multivariable Calculus and Modelling | |
| 18 | Select from AMME2000: Engineering Analysis AMME3060: Engineering Methods AMME5060: Advanced Computational Engineering | |
List | 12 | Select from AERO4360: Aerospace Structures 2 AMME5202: Computational Fluid Dynamics Note:Alternative units AMME5271 Computational Nanotechnology and AMME5912 Crash Analysis and Design may be selected from the free electives collection. |
Major in Computational Engineering
| Type | CP | CP From |
| 24 |
Select from
AMME4111: Thesis A AMME4112: Thesis B MATH1002: Linear Algebra MATH1005: Statistical Thinking with Data MATH1021: Calculus of One Variable MATH1023: Multivariable Calculus and Modelling |
|
| 18 |
Select from
AMME2000: Engineering Analysis AMME3060: Engineering Methods AMME5060: Advanced Computational Engineering |
|
List
|
12 |
Select from
AERO4360: Aerospace Structures 2 AMME5202: Computational Fluid Dynamics Note: Alternative units AMME5271 Computational Nanotechnology and AMME5912 Crash Analysis and Design may be selected from the free electives collection. |
| View complete Program Structure | ||
Major in Engineering Design
| Type | CP | CP From |
| 18 |
Select from
AERO3460: Aerospace Design 1 AERO4460: Aerospace Design 3 MECH2400: Mechanical Systems Design 1 |
|
| 12 |
Select from
AERO1400: Intro to Aircraft Construction and Design AERO3465: Aerospace Design 2 |
|
| 12 |
Select from
AMME4111: Thesis A AMME4112: Thesis B |
|
| 6 |
Select from
AERO5200: Advanced Aerodynamics AERO5400: Advanced Aircraft Design Analysis Note: Alternative units AMME5902 Computer Aided Manufacturing or AMME5912 Crash Analysis and Design may be selected from the free electives collection |
|
| View complete Program Structure | ||
Major in Space Engineering
| Type | CP | CP From |
| 6 |
Select from
AERO1560: Introduction to Aerospace Engineering |
|
| 18 |
Select from
AERO2705: Space Engineering 1 AERO3760: Space Engineering 2 AERO4701: Space Engineering 3 |
|
| 12 |
Select from
AMME4111: Thesis A AMME4112: Thesis B |
|
| 12 |
Select from
Unit Block Space Specialist Units |
|
| View complete Program Structure | ||
Note: There are ATAR or WAM entry requirements for this major. To be eligible for this major, students are required to meet progression requirements.
Block 1 - Engineering General Electives (Max CP: 6)
| Unit Code | Unit Name | CP | Sessions Offered |
| ENGG1000 | History and Philosophy of Engineering | 6 |
Semester 1 |
Note:
Students may take 6 credit points of free general electives to complete the total number of credit points for their degree. Students may take the following units of study as free general electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.
(1) Any units of study from the Faculties of: (i) Engineering and Information Technologies (ii) Science (iii) Arts (iv) Sydney Business School
(2) Any other units of study approved by the Faculty of Engineering and Information Technologies Courses Committee, which will be published in an appropriate place by the Faculty.
(3) Any units of study approved by the Dean (or his/her delegate in these matters), or by the relevant Head of School or Program Director, on a case by case basis upon application by the student.
Block 2 - Aeronautical Specialist Electives (Min CP: 24,Max CP: 36)
Note: Space Engineering units AERO2705, AERO3760, AERO4701 are only available to students admitted to the Space Engineering major.
Block 3 - Aeronautical Advanced Specialist (Min CP: 12,Max CP: 18)
| Unit Code | Unit Name | CP | Sessions Offered |
| AERO4260 | Aerodynamics 2 | 6 |
Semester 1 |
| AERO4360 | Aerospace Structures 2 | 6 |
Semester 1 |
| AERO4560 | Flight Mechanics 2 | 6 |
Semester 2 |
Note: At least two of these units (12 credit points) must be taken.
Block 4 - Space Specialist Units (Max CP: 12)
Block 5 - Engineering Core (Min CP: 36,Max CP: 36)
Note:
Complete a minimum of 36cp including:
- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)
- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)
- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)
- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)
Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.
Block 6 - Aeronautical Stream Core (Min CP: 108,Max CP: 108)
Block 7 - Space Major Core (Max CP: 18)
| Unit Code | Unit Name | CP | Sessions Offered |
| AERO2705 | Space Engineering 1 | 6 |
Semester 2 |
| AERO3760 | Space Engineering 2 | 6 |
Semester 2 |
| AERO4701 | Space Engineering 3 | 6 |
Semester 1 |
Note: These units are only available to students enrolled in the Space major. ATAR/WAM requirements apply.
| Course: | Aeronautical Engineering (mid-year) (2019) |
| CP Required: | 192 |
| Min FT Duration: | 4.00 Years |
| Min PT Duration: | 4.00 Years |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016 |
| Requirements: | Summary In summary the requirements are: Students must complete 192 credit points as follows: ► 36 credit points of Engineering core units ► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp) ► 108 credit points of Aeronautical stream core units ► A minimum of 24 credit points of Aeronautical Specialist electives ► A minimum of 12 credit points of Aeronautical Advanced Specialist electives ► A maximum of 6 credit points of General (Free) Electives The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above. Handbook Rules The handbook rules governing this degree are as follows: To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must: (a) successfully complete 192 credit points comprising: (i) A minimum of 36 credit points from the Engineering Core Table, including all required units; (ii) A minimum of 108 credit points from the Engineering Stream Table pertaining to the specialist stream being undertaken, including all required units; (iii) A minimum of 48 credit points of additional units from the Engineering Stream Specialist Table pertaining to the specialist stream being undertaken, including satisfying any additional requirements specified for the Specialist Table. (b) Successfully complete the requirements of the Professional Engagement Program (2) The class of Honours will be determined by the EIHWAM. (3) In exceptional circumstances, the Dean may vary the conditions for the award of Honours after seeking the advice of the relevant Head of School. Advanced units in Maths and Science Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling. Study Abroad Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester's standard units. Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study. Majors A major requires: (a) the completion of 48 credit points chosen from units of study listed in the table for that major; (b) satisfying any additional requirements specified for the major, and listed with the table of units for the major; Dalyell Scholars Program Unit substitutions may be available for students enrolled in the Dalyell Scholars Program, depending on their year of commencement and degree. Dalyell Scholars can view the Canvas page for further information specific to their circumstances: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars Faculty Resolutions Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/ |
