ProgramsEngENGI (UG)BEHons CombinedBE/BABE/BA to 2022Mechatronic / Arts (2022 and earlier) (2015)
Show information forcommencing students (ie. started First Year then).
The course requirements described here apply to persons who commenced their candidature after 1 January, 2015 and persons who commenced their candidature prior to 1 January, 2015 who elect to proceed under 2015 resolutions.
Candidates who commenced prior to 1 January, 2015 may complete the requirements in accordance with the resolutions in force at the time of their commencement, provided that requirements are completed by 1 January, 2020, or later date as the faculty may, in special circumstances, approve.
Candidates who first commenced in 2015, and are re-enrolling for 2016 or later, should be aware that there may have been changes in units of study offered since, Check that units are still available by clicking the unit of study link in the course table. See 2022 version of this course for up to date unit of study list.
For details of relevant resolutions see faculty handbook at sydney.edu.au/handbooks.
Faculty of [email protected]
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Select plan for Major/Pathway
Year 1 - Semester 1
| Type | CP | CP From |
Core | 6 | ENGG1801: Engineering Computing Note: INFO1103 is an acceptable alternate. |
Core | 3 | MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
Core | 3 | MATH1002: Linear Algebra |
Core | 6 | MTRX1701: Introduction to Mechatronic Engineering |
| 6 | Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 1 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME1362: Introduction to Engineering Materials |
Core | 6 | ENGG1802: Engineering Mechanics |
Core | 3 | MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
Core | 3 | MATH1005: Statistical Thinking with Data |
| 6 | Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 2 - Semester 1
| Type | CP | CP From |
Core | 6 | ELEC1103: Fundamentals of Electrical and Electronic Engineering |
Core | 6 | AMME2500: Engineering Dynamics |
Core | 6 | MATH2067: DEs and Vector Calculus for Engineers Note: MATH2067 is discontinued from 2018. Replacement unit is MATH2021. |
| 6 | Arts |
Year 2 - Semester 2
| Type | CP | CP From |
Core | 6 | MTRX1702: Mechatronics 1 |
Core | 6 | ELEC2104: Electronic Devices and Circuits |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 3 - Semester 1
| Type | CP | CP From |
Core | 6 | MTRX2700: Mechatronics 2 |
Core | 6 | ELEC3404: Electronic Circuit Design |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 3 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME2301: Mechanics of Solids |
Core | 6 | MECH2400: Mechanical Systems Design 1 |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 4 - Semester 1
| Type | CP | CP From |
Core | 6 | AMME3500: System Dynamics and Control |
Core | 6 | MECH3660: Manufacturing Engineering |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 4 - Semester 2
| Type | CP | CP From |
Core | 6 | MECH3460: Mechanical Systems Design 2 |
Core | 6 | MTRX3700: Mechatronics 3 |
| 12 | Select from Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. |
Year 5 - Semester 1
| Type | CP | CP From |
Core | 6 | AMME4111: Thesis A |
Core | 0 | ENGG4000: Practical Experience |
Core | 6 | MECH4601: Professional Engineering 2 |
| 12 | Select from Mechatronic Electives Note: At least 24 credit points of Mechatronic Elective units must be completed. These may be taken in either semester. |
Year 5 - Semester 2
| Type | CP | CP From |
Core | 6 | AMME4112: Thesis B |
| 6 | Arts Note: The Arts component of the combined Mechatronics/Arts degree requires a minimum of 84 credit points of Arts units of study, including at least 54 credit points at 2nd or 3rd year level, and the completion of an Arts major. Consult the Resolutions for the Combined Engineering/Arts degree in Faculty handbooks for further details. | |
| 12 | Select from Mechatronic Electives Note: At least 24 credit points of Mechatronic Elective units must be completed. These may be taken in either semester. |
Block 1 - Arts (Min CP: 84,Max CP: 84)
Note: For the Bachelor of Arts component, students are required to complete a total of 84 credit points of Table A units as listed in the handbook of the Faculty of Arts and Social Sciences, including a major from Table A and a minimum 54 credit points of 2000/3000 level units of study. See Faculty handbook at http://sydney.edu.au/handbooks
Block 2 - Mechatronic Electives (Min CP: 18,Max CP: 24)
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| AMME4790 | Introduction to Biomechatronics | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1
For Semester 1 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
| MECH5720 | Sensors and Signals | 6 |
Semester 2
For Semester 2 calendar dates look up `Semester 1` on the university timetable website at https://web.timetable.usyd.edu.au/calendar.jsp
|
Note: AMME4790 has been replaced by AMME5790 from 2017
| Course: | Mechatronic / Arts (2022 and earlier) (2015) |
| CP Required: | 240 |
| Min FT Duration: | 5.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
| Requirements: | To qualify for the award of the combined degree, a candidate must complete 240 credit points comprising: (1) For the Bachelor of Engineering, all units of study prescribed in the table of units for the Bachelor of Engineering stream the candidate is pursuing. (2) For the Bachelor of Arts. a total of 84 credit points from Table A in the Faculty of Arts and Social Sciences Handbook, including: (a) a major from Table A; (b) a minimum 54 credit points of 2000/3000 level units of study. Students not meeting the Honours requirement of an average mark of 65% throughout their degree will be awarded the PASS degree Bachelor of Engineering. For further details, see Faculty Handbook at http://sydney.edu.au/handbooks/ |
Report Type:
