Note: This course version is currently under review and is subject to change.

ProgramsEngENGI (UG)BEHons CombinedBE/BPM 2019+BE/BPM pre-2018Civil / Project Management (2016)


Show information forcommencing students (ie. started First Year then).
 
ASK ABOUT THIS COURSE


Print View | Download as PDF Administrative Information (Fees, ATAR etc.)

Select plan for Major/Pathway

Year 1 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1001: Differential Calculus


Note:  This unit is discontinued from 2018. Replacement unit is MATH1021.
6CIVL1900: Introduction to Civil Engineering
6ENGG1850: Introduction to Project Management
6ENGG1111: Integrated Engineering 1
3MATH1002: Linear Algebra

Note:   ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Year 1 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1003: Integral Calculus and Modelling


Note:  This unit is discontinued from 2018. Replacement unit is MATH1023.
6ENGG1802: Engineering Mechanics


Note:  From 2018, this unit is not available to Civil stream students. Replacement unit is CIVL1802.
6PSYC1002: Psychology 1002
6GEOL1501: Engineering Geology 1
3MATH1005: Statistical Thinking with Data

Note:   MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Students who fail PSYC1002 in 2016, can either take up PSYC1001 in S1 of 2017 or PMGT1852 in S2 2017.

Year 2 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ENGG1801: Engineering Computing
6CIVL2201: Structural Mechanics
6ENGG2850: Project Cost and Finance


Note:  Exclusion with CIVL2812, ENGG2850 is to be taken in preference
6CIVL2110: Materials

Year 2 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG2111: Integrated Engineering 2
6BUSS1040: Economics for Business Decision Making
6CIVL2010: Environmental Engineering
6CIVL1810: Engineering Construction and Surveying
6ENGG2852: Project Based Organisational Behaviour [not offered in 2020]


Note:  This unit is discontinued from 2019. Replacement unit is PMGT2854.

Note:   ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.

Year 3 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6PMGT3856: Sustainability and Knowledge Management
6ENGG2851: Project Analytics
6CIVL2700: Transport Systems
6MATH2061: Linear Mathematics and Vector Calculus

Year 3 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ENGG2855: Project Acceptance
6CIVL2410: Soil Mechanics 1
6CIVL2611: Introductory Fluid Mechanics
6PM Elective

Year 4 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG3111: Integrated Engineering 3
6ENGG3853: Project Risk Management: Tools & Techniques
6CIVL3205: Concrete Structures 1
6CIVL3612: Fluid Mechanics
6PMGT3858: Adapting to Project Context

Note:   ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.

Year 4 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ENGG3854: Legal Aspects of Projects
6CIVL3206: Steel Structures 1
6CIVL3811: Engineering Design and Construction
6PMGT3855: Project Variance Analysis

Year 5 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG4111: Integrated Engineering 4
6CIVL4022: Thesis A
6CIVL4903: Civil Engineering Design
0ENGG4000: Practical Experience
List
12Select from
Civil Specialist - Breadth
Civil Specialist - Depth


Note:  Students may defer 6cp from this block to semester 2.

Note:   ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.

Year 5 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6PMGT3857: International Project Management
List
6Select from
Civil Specialist - Breadth
Civil Specialist - Depth


Note:  Students who have done only 6cp of Civil electives in Semester 1 must complete 12cp of these electives here.
6CIVL4023: Thesis B

48cp Majors

Type CP CP From
View complete Program Structure

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Construction Management (24cp)

Type CP CP From
Core
6 CIVL3805: Project Scope, Time and Cost Management
12 Select from CIVL4810: Mgmnt of People, Quality and Risk in PE
CIVL4813: Contracts Formulation and Management
CIVL4814: Project Procurement and Tendering
CIVL4815: Project Formulation
View complete Program Structure

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

Major in Environmental Engineering (24cp)

Type CP CP From
Core
6 CIVL3614: Hydrology
12 Select from CIVL5351: Geoenvironmental Engineering
CIVL5668: Fundamentals of Wind Engineering for Design
CIVL5670: Reservoir, Stream and Coastal Engineering
CIVL5999: Advanced Research and Analysis
View complete Program Structure

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

Major in Geotechnical Engineering (24cp)

Type CP CP From
Core
6 CIVL3411: Geotechnical Engineering 1
12 Select from CIVL5351: Geoenvironmental Engineering
CIVL5453: Geotechnical Hazards
CIVL5458: Numerical Methods in Civil Engineering
CIVL5999: Advanced Research and Analysis
View complete Program Structure

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

Major in Humanitarian Engineering (24cp)

Type CP CP From
Core
6 ASNS2665: Understanding Southeast Asia


Note: Students may take PMGT3857, EDUF3026, ITLS6007 or HSBH3009 instead of ASNS2665 as part of the Humanitarian Engineering major
Core
6 CIVL3310: Humanitarian Engineering
Core
6 CIVL5320: Engineering for Sustainable Development
Core
6 CIVL5330: Global Engineering Field Work


Note: Students may take SLIC3000 or SLIC4000 instead of CIVL5330 as part of the Humanitarian Engineering major
View complete Program Structure

Major in Structures (24cp)

Type CP CP From
Core
6 CIVL3235: Structural Analysis
12 Select from CIVL5266: Steel Structures - Stability
CIVL5269: Advanced Concrete Structures
CIVL5277: Structural Rehabilitation and Timber Design
CIVL5458: Numerical Methods in Civil Engineering
CIVL5999: Advanced Research and Analysis
View complete Program Structure

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

Major in Transport Engineering (24cp)

Type CP CP From
Core
6 CIVL3703: Transport Policy, Planning and Deployment
6 Select from CIVL5701: Transport Networks
6 Select from CIVL5702: Traffic Engineering
View complete Program Structure

Note: An additional 6 Credit points must be taken from:

A maximum of 6cp from any other CIVL3###, CIVL4### or CIVL5### unit from the Civil Core Table or the Civil Specialist Table(s)

Block 1 - Engineering Core (Min CP: 36,Max CP: 48)

Unit Code Unit Name CP Sessions Offered
AERO2711 Aerospace Engineering Project 1 6 Semester 1
Semester 2
Int February
Int July
AERO3711 Aerospace Engineering Project 2 6 Semester 1
Semester 2
Int February
Int July
AERO4711 Aerospace Engineering Project 3 6 Semester 1
Semester 2
Int February
Int July
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1061 Advanced Engineering 1 6 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2062 Engineering Project: Business Plan 2 Adv 6 Semester 2
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3062 Technology Education (Advanced) 6 Semester 2
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4000 Practical Experience 0 Int January
Int February
Int March
Int April
Int May
Int June
Int July
Int August
Int September
Int October
Int November
Int December
ENGG4064 Advanced Engineering Design A 6 Semester 2
Int July
ENGG4065 Advanced Engineering Design B 6 Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
MATH1001 Differential Calculus 3 Semester 1
Summer Main
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1003 Integral Calculus and Modelling 3 Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1901 Differential Calculus (Advanced) 3 Semester 1
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1903 Integral Calculus and Modelling Advanced 3 Semester 2
MATH1905 Statistics (Advanced) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGG4000 Practical Experience (0cp)

- Exactly 6cp from ENGG1111 Integrated Engineering 1 (6cp) OR ENGG1061 Advanced Engineering 1A (6cp) (see note 1)

- At least 2cp from ENGG2xxx Integrated Engineering 2 (2cp) OR ENGG2062 Engineering Project Business Plan 2 Adv (6cp) (see note 1) OR AERO2711 Aerospace Engineering Project 1 (see note 1)

- At least 2cp from ENGG3xxx Integrated Engineering 3 (2cp) OR ENGG3062 Technology Education (Advanced) (6cp) (see note 1) OR AERO3711 Advanced Aerospace Project 2 (see note 1)

- At least 2cp from ENGG4xxx Integrated Engineering 4 (2cp) OR ENGG4064 Advanced Engineering Design A (6cp) (see note 1) OR ENGG4065 Advanced Engineering Design B (6cp) (see note 1) OR AERO4711 Advanced Aerospace Project 3 (see note 1)

- Exactly 12cp of MATH1xxxx units: MATH1001 Differential Calculus (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1003 Integral Calculus AND Modelling (3cp) MATH1005 Statistics (3cp)

- A minimum of 12cp of (see notes 2,3) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 hesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. The Advanced Engineering units are only available to students who have been accepted into the relevant year of the Advanced Engineering program.

Note 2. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Civil Core (Min CP: 102,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
CIVL1810 Engineering Construction and Surveying 6 Semester 2
CIVL1900 Introduction to Civil Engineering 6 Semester 1
CIVL2010 Environmental Engineering 6 Semester 2
CIVL2110 Materials 6 Semester 1
Semester 2
CIVL2201 Structural Mechanics 6 Semester 1
CIVL2410 Soil Mechanics 1 6 Semester 2
CIVL2611 Introductory Fluid Mechanics 6 Semester 2
CIVL2700 Transport Systems 6 Semester 1
CIVL2812 Project Appraisal 6 Semester 2
CIVL3205 Concrete Structures 1 6 Semester 1
CIVL3206 Steel Structures 1 6 Semester 2
CIVL3612 Fluid Mechanics 6 Semester 1
CIVL3811 Engineering Design and Construction 6 Semester 2
CIVL4903 Civil Engineering Design 6 Semester 1
Semester 2
ENGG1801 Engineering Computing 6 Semester 1
Int January
ENGG1802 Engineering Mechanics 6 Semester 2
Summer Main
Int January
GEOL1501 Engineering Geology 1 6 Semester 2
MATH2061 Linear Mathematics and Vector Calculus 6 Semester 1
Summer Main

Block 3 - PM Core (Min CP: 66,Max CP: 66)

Unit Code Unit Name CP Sessions Offered
BUSS1040 Economics for Business Decision Making 6 Semester 1
Semester 2
ENGG1850 Introduction to Project Management 6 Semester 1
ENGG2850 Project Cost and Finance 6 Semester 1
ENGG2851 Project Analytics 6 Semester 1
ENGG2852 Project Based Organisational Behaviour [not offered in 2020] 6 Semester 2
ENGG2855 Project Acceptance 6 Semester 1
ENGG3853 Project Risk Management: Tools & Techniques 6 Semester 1
ENGG3854 Legal Aspects of Projects 6 Semester 1
Semester 2
PMGT3855 Project Variance Analysis 6 Semester 2
PMGT3858 Adapting to Project Context 6 Semester 1
PSYC1002 Psychology 1002 6 Semester 2
Summer Main

Block 4 - Civil Specialist - Breadth (Min CP: 6,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
CIVL3235 Structural Analysis 6 Semester 2
CIVL3411 Geotechnical Engineering 1 6 Semester 2
CIVL3614 Hydrology 6 Semester 2
CIVL3703 Transport Policy, Planning and Deployment 6 Semester 1
CIVL3805 Project Scope, Time and Cost Management 6 Semester 1

Block 5 - Civil Specialist - Depth (Min CP: 12,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
CIVL4810 Mgmnt of People, Quality and Risk in PE 6 Semester 2
CIVL4813 Contracts Formulation and Management 6 Semester 2
CIVL4814 Project Procurement and Tendering 6 Semester 2
CIVL4815 Project Formulation 6 Semester 1
CIVL5266 Steel Structures - Stability 6 Semester 1
CIVL5269 Advanced Concrete Structures 6 Semester 2
CIVL5277 Structural Rehabilitation and Timber Design 6 Semester 2
CIVL5320 Engineering for Sustainable Development 6 Semester 2
CIVL5351 Geoenvironmental Engineering 6 Semester 2
CIVL5453 Geotechnical Hazards 6 Semester 2
CIVL5458 Numerical Methods in Civil Engineering 6 Semester 1
CIVL5668 Fundamentals of Wind Engineering for Design 6 Semester 1
CIVL5670 Reservoir, Stream and Coastal Engineering 6 Semester 1
CIVL5701 Transport Networks 6 Semester 2
CIVL5702 Traffic Engineering 6 Semester 1
CIVL5999 Advanced Research and Analysis 6 Semester 1

Block 6 - PM Elective (Min CP: 18,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
PMGT2854 Executing Projects 6 Semester 2
PMGT3856 Sustainability and Knowledge Management 6 Semester 1
PMGT3857 International Project Management 6 Semester 2
Course: Civil / Project Management (2016)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2018, 2017, 2016, 2015
Requirements: In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points):

► 36 credit points of Engineering core units

► 102 credit points of Civil stream core units

► 12 credit points of Civil Specialist depth units

► 6 credit points of Civil Specialist breadth units

Project Management:

► 66 credit points of Project Management core units

► 18 credit points of Project Management elective units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete the core units of study as set out in the Bachelor of Project Management Unit of Study Table.

(b) 18cp from the Project Management Electives Table must be completed.

Engineering Honours Requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/
Report Type: