1. Overview

Course:	Software Engineering (2018)
CP Required:	192
Min FT Duration:	4.00 Years
Min PT Duration:	4.00 Years
Faculty/School:	Faculty of Engineering
Years Offered:	2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 102 credit points of Software stream core units

► A minimum of 12 credit points of Software Specialist fundamentals units

► A minimum of 30 credit points of Software Specialist elective units

► A maximum of 12 credit points of General (Free) Electives

The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above.

Handbook Rules

The handbook rules governing this degree are as follows:

To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must:

(a) successfully complete 192 credit points comprising:

(i) A minimum of 36 credit points from the Engineering Core Table, including all required units;

(ii) A minimum of 108 credit points from the Engineering Stream Table pertaining to the specialist stream being undertaken, including all required units;

(iii) A minimum of 48 credit points of additional units from the Engineering Stream Specialist Table pertaining to the specialist stream being undertaken, including satisfying any additional requirements specified for the Specialist Table.

(b) Successfully complete the requirements of the Professional Engagement Program

(2) The class of Honours will be determined by the EIHWAM.

(3) In exceptional circumstances, the Dean may vary the conditions for the award of Honours after seeking the advice of the relevant Head of School.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester's standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Dalyell Scholars Program

Unit substitutions may be available for students enrolled in the Dalyell Scholars Program, depending on their year of commencement and degree. Dalyell Scholars can view the Canvas page for further information specific to their circumstances: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Note: MATH1021 and MATH1002 may be replaced by advanced units MATH1921 and MATH1902.

Note: MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.

Note: Up to 12 credit points of general electives may be taken.

Note: Up to 12 credit points of general electives may be taken.

Note: Up to 12 credit points of general electives may be taken.

Note: Up to 12 credit points of general electives may be taken.

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

4. Pathways

48cp Majors

Type

CP

CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Computer Engineering (24cp)

Type	CP	CP From
Core	6	ELEC3506: Communications Networks
Core	6	ELEC3607: Embedded Systems
Core	6	ELEC3608: Computer Architecture
Software Specialist - Electives	6	Select from COMP3520: Operating Systems Internals ELEC3104: Engineering Electromagnetics ELEC3304: Control ELEC3305: Digital Signal Processing ELEC3404: Electronic Circuit Design ELEC3702: Management for Engineers

Note: 24cp minimum required to achieve this major.

Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

Major in Power Engineering (24cp)

Type	CP	CP From
Core	6	ELEC3203: Electricity Networks Note: Prerequisite for ELEC5204
Core	6	ELEC3204: Power Electronics and Applications
Core	6	ELEC3206: Electrical Energy Conversion Systems Note: Prerequisite for ELEC5204
Core	6	ELEC3304: Control
Core	6	ELEC5204: Power Systems Analysis and Protection
Software Specialist - Electives	6	Select from ELEC5205: High Voltage Engineering ELEC5211: Power System Dynamics and Control ELEC5212: Power System Planning and Markets

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

Major in Telecommunications Engineering (24cp)

Type	CP	CP From
Core	6	ELEC3305: Digital Signal Processing
Core	6	ELEC3405: Communications Electronics and Photonics
Core	6	ELEC3505: Communications Note: Prerequisite for ELEC4505
Core	6	ELEC3506: Communications Networks
Core	6	ELEC4505: Digital Communication Systems

Note: All units must be completed

Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - Software Core (Min CP: 102,Max CP: 102)

Unit Code	Unit Name	CP	Sessions Offered
COMP2017	Systems Programming	6	Semester 1
COMP2123	Data Structures & Algorithms	6	Semester 1 Semester 2
COMP5348	Enterprise Scale Software Architecture	6	Semester 2
ELEC1601	Introduction to Computer Systems	6	Semester 1 Semester 2
ELEC3609	Internet Software Platforms	6	Semester 2
ELEC5618	Software Quality Engineering	6	Semester 1
ELEC5619	Object Oriented Application Frameworks	6	Semester 2
INFO1110	Introduction to Programming	6	Semester 1 Semester 2
INFO1113	Object-Oriented Programming	6	Semester 1 Semester 2
INFO3616	Principles of Security and Security Engineering	6	Semester 2
ISYS2110	Analysis & Design of Web Information Systems	6	Semester 1
ISYS2120	Data & Information Management	6	Semester 2
MATH2069	Discrete Mathematics and Graph Theory	6	Semester 1
SOFT2201	Software Construction and Design 1	6	Semester 2
SOFT2412	Agile Software Development Practices	6	Semester 2
SOFT3202	Software Construction and Design 2	6	Semester 1
SOFT3888	Software Development Project	6	Semester 2

Note: Complete all 17 units of study (102 credit points) from this table

Block 3 - Software Specialist - Fundamentals (Min CP: 12,Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
BUSS1030	Accounting, Business and Society	6	Semester 1 Semester 2
COMP2022	Models of Computation	6	Semester 2
COMP2922	Models of Computation (Adv)	6	Semester 2
DATA1001	Foundations of Data Science	6	Semester 1 Semester 2
DATA1002	Informatics: Data and Computation	6	Semester 2
DATA1902	Informatics: Data and Computation (Advanced)	6	Semester 2
DATA2001	Data Science: Big Data and Data Diversity	6	Semester 1
DATA2002	Data Analytics: Learning from Data	6	Semester 2
DATA2901	Big Data and Data Diversity (Advanced)	6	Semester 1
ELEC1004	Practical Introduction to Electrical Engineering	6	Semester 1
ELEC1103	Fundamentals of Electrical and Electronic Engineering	6	Semester 1
ELEC2103	Simulation and Numerical Solutions in Engineering	6	Semester 2
ELEC2104	Electronic Devices and Circuits	6	Semester 2
ELEC2302	Signals and Systems	6	Semester 2
ELEC2602	Digital Logic	6	Semester 1
INFO1110	Introduction to Programming	6	Semester 1 Semester 2
INFO2150	Introduction to Health Data Science	6	Semester 2
ISYS2160	Information Systems in the Internet Age	6	Semester 2
MATH2061	Linear Mathematics and Vector Calculus	6	Semester 1 Summer Main
MKTG1001	Marketing Principles	6	Semester 1 Semester 2
PHYS1001	Physics 1 (Regular)	6	Semester 1
PHYS1003	Physics 1 (Technological)	6	Semester 2
PHYS2213	Physics 2EE	6	Semester 2
SOFT2201	Software Construction and Design 1	6	Semester 2
SOFT2412	Agile Software Development Practices	6	Semester 2

Note: 1st and 2nd year Single Degree Electives

Block 4 - Software Specialist - Electives (Min CP: 30,Max CP: 48)

Unit Code	Unit Name	CP	Sessions Offered
COMP3308	Introduction to Artificial Intelligence	6	Semester 1
COMP3419	Graphics and Multimedia	6	Semester 2
COMP3520	Operating Systems Internals	6	Semester 2
COMP3608	Introduction to Artificial Intelligence (Adv)	6	Semester 1
COMP5045	Computational Geometry	6	Semester 1
COMP5047	Pervasive Computing	6	Semester 2
COMP5048	Visual Analytics	6	Semester 1 Semester 2
COMP5206	Information Technologies and Systems	6	Semester 1
COMP5318	Machine Learning and Data Mining	6	Semester 1 Semester 2
COMP5338	Advanced Data Models	6	Semester 2
COMP5415	Multimedia Design and Authoring	6	Semester 2
COMP5416	Advanced Network Technologies	6	Semester 2
COMP5424	Information Technology in Biomedicine	6	Semester 1
COMP5425	Multimedia Retrieval	6	Semester 1
COMP5426	Parallel and Distributed Computing	6	Semester 1
ELEC3104	Engineering Electromagnetics	6	Semester 1
ELEC3203	Electricity Networks	6	Semester 1
ELEC3204	Power Electronics and Applications	6	Semester 1
ELEC3206	Electrical Energy Conversion Systems	6	Semester 2
ELEC3304	Control	6	Semester 2
ELEC3305	Digital Signal Processing	6	Semester 1
ELEC3404	Electronic Circuit Design	6	Semester 1
ELEC3405	Communications Electronics and Photonics	6	Semester 2
ELEC3505	Communications	6	Semester 1
ELEC3506	Communications Networks	6	Semester 2
ELEC3607	Embedded Systems	6	Semester 1
ELEC3608	Computer Architecture	6	Semester 2
ELEC3610	E-Business Analysis and Design	6	Semester 1
ELEC3612	Pattern Recognition and Machine Intelligence	6	Semester 1
ELEC3702	Management for Engineers	6	Semester 2
ELEC3802	Fundamentals of Biomedical Engineering	6	Semester 1
ELEC3803	Bioelectronics [not offered in 2021]	6	Semester 2
ELEC4505	Digital Communication Systems	6	Semester 1
ELEC4706	Project Management	6	Semester 1
ELEC5101	Antennas and Propagation	6	Semester 2
ELEC5203	Topics in Power Engineering [not offered in 2021]	6	Semester 2
ELEC5204	Power Systems Analysis and Protection	6	Semester 1
ELEC5205	High Voltage Engineering	6	Semester 2
ELEC5206	Sustainable Energy Systems	6	Semester 2
ELEC5207	Advanced Power Conversion Technologies	6	Semester 2
ELEC5208	Intelligent Electricity Networks	6	Semester 1
ELEC5211	Power System Dynamics and Control	6	Semester 1
ELEC5212	Power System Planning and Markets	6	Semester 2
ELEC5303	Computer Control System Design [not Offered 2021]	6	Semester 1
ELEC5403	Radio Frequency Engineering [not offered in 2021]	6	Semester 1
ELEC5507	Error Control Coding	6	Semester 1
ELEC5508	Wireless Engineering	6	Semester 2
ELEC5509	Mobile Networks	6	Semester 1
ELEC5510	Satellite Communication Systems	6	Semester 2
ELEC5511	Optical Communication Systems	6	Semester 1
ELEC5512	Optical Networks	6	Semester 2
ELEC5514	IoT Wireless Sensing and Networking	6	Semester 2
ELEC5516	Electrical and Optical Sensor Design	6	Semester 1
ELEC5614	Real Time Computing	6	Semester 1
ELEC5615	Advanced Computer Architecture	6	Semester 1
ELEC5616	Computer and Network Security	6	Semester 1
ELEC5617	Topics in Software Engineering	6	Semester 2
ELEC5620	Model Based Software Engineering	6	Semester 2
ELEC5622	Signals, Software and Health	6	Semester 2
ELEC5701	Technology Venture Creation [not offered in 2021]	6	Semester 2
ELEC5803	Advanced Bioelectronics [Not Offered 2019]	6	Semester 1
INFO3404	Database Systems 2	6	Semester 1 Semester 2
INFO3504	Database Systems 2 (Adv)	6	Semester 2
INFO3551	Information Technology Exchange	6	Semester 1 Semester 2 Int January Int July
INFO5301	Information Security Management	6	Semester 1 Semester 2
INFO5990	Professional Practice in IT	6	Semester 1 Semester 2
INFO5991	Services Science Management and Engineering	6	Semester 2
INFO5992	Understanding IT Innovations	6	Semester 1 Semester 2
INFO5993	IT Research Methods	6	Semester 1 Semester 2
INFO6007	Project Management in IT	6	Semester 1 Semester 2

Note: At least 42cp are required from Software Specialist - Fundamentals/Electives blocks.

3rd Year Electives: It is recommended to take at least 2 units from Level 4 Units and 3 units from Level 3 Units.

Block 6 - Engineering General Electives (Max CP: 12)

Note: Students may take 12 credit points of free general electives to complete the total number of credit points for their degree. Students may take the following units of study as free general electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculties of: (i) Engineering and Information Technologies (ii) Science (iii) Arts (iv) Sydney Business School

(2) Any other units of study approved by the Faculty of Engineering and Information Technologies Courses Committee, which will be published in an appropriate place by the Faculty.

(3) Any units of study approved by the Dean (or his/her delegate in these matters), or by the relevant Head of School or Program Director, on a case by case basis upon application by the student.