2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Civil stream core units

Project Management:

► 84 credit points of Project Management core units

Electives:

► 12 credit points chosen from Project Management elective units or Civil Specialist Breadth/ Depth elective units

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete 96 credit points comprising:

(i) 84 credit points of core units as set out in the Bachelor of Project Management Unit of Study Table

(ii) 12 credit points of electives from either the elective units set out in the Bachelor of Project Management Unit of Study Table, or from the Stream Electives in the candidate's Bachelor of Engineering Honours Stream

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1002: Linear Algebra
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Engineering Core	3	Select from MATH1021: Calculus of One Variable
Civil Stream Core	6	Select from CIVL1900: Introduction to Civil Engineering
Project Management Core	6	Select from ENGG1850: Introduction to Project Management
Engineering Core	0	Select from ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type	CP	CP From
Project Management Core	6	Select from PMGT1852: Facilitation and Stakeholder Engagement
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data
Engineering Core	3	Select from MATH1023: Multivariable Calculus and Modelling
Civil Stream Core	6	Select from GEOL1501: Engineering Geology 1 Note: From 2024, CIVL1022 replaces GEOL1501. Students who have not yet completed GEOL1501 should enrol in CIVL1022.
Civil Stream Core	6	Select from CIVL1802: Statics Note: This unit is now offered in Semester 1. Students who have not yet completed CIVL1802 should contact their academic advisor for enrolment planning.

Year 2 - Semester 1

Type	CP	CP From
Civil Stream Core	6	Select from CIVL2201: Structural Mechanics
Project Management Core	6	Select from ENGG1863: Effective Project Communication
Civil Stream Core	6	Select from ENGG1810: Introduction to Engineering Computing Note: ENGG1810 replaces ENGG1801 from 2021.
Civil Stream Core	6	Select from CIVL2110: Materials Note: CIVL1110 replaces CIVL2110 from 2022.

Year 2 - Semester 2

Type	CP	CP From
Project Management Core	6	Select from ENGG1865: Project Time, Cost and Resources
Civil Stream Core	6	Select from CIVL2010: Environmental Engineering
Civil Stream Core	6	Select from CIVL1810: Engineering Construction and Surveying
Civil Stream Core	6	Select from CIVL2812: Project Appraisal
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2 Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.

Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. Students may take this unit in the final semester or may swap with an elective to take it earlier.

https://canvas.sydney.edu.au/courses/2806/pages/feit-changes-to-the-bachelor-of-engineering-honours-degree-how-they-affect-you

Year 3 - Semester 1

Type	CP	CP From
Project Management Core	6	Select from PMGT2711: Critical Thinking for Projects
Project Management Core	6	Select from ENGG1860: Project Initiation & Scope
Civil Stream Core	6	Select from MATH2061: Linear Mathematics and Vector Calculus
Civil Stream Core	6	Select from CIVL2700: Transport Systems
Engineering Core	0	Select from ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 2

Type	CP	CP From
Project Management Core	6	Select from PMGT2821: Project Conflict Management
Project Management Core	6	Select from PMGT1711: Systems Thinking in Projects
Civil Stream Core	6	Select from CIVL2611: Introductory Fluid Mechanics
Civil Stream Core	6	Select from CIVL2410: Soil Mechanics 1

Year 4 - Semester 1

Type	CP	CP From
Project Management Core	6	Select from ENGG2855: Project Acceptance
Civil Stream Core	6	Select from CIVL3612: Fluid Mechanics
Civil Stream Core	6	Select from CIVL3205: Concrete Structures 1
Project Management Core	6	Select from ENGG2851: Project Analytics
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3 Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.

Year 4 - Semester 2

Type	CP	CP From
Project Management Core	6	Select from PMGT2822: Reframing Projects
Project Management Core	6	Select from PMGT2854: Executing Projects
Civil Stream Core	6	Select from CIVL3811: Engineering Design and Construction
Civil Stream Core	6	Select from CIVL3206: Steel Structures 1
Engineering Core	0	Select from ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 5 - Semester 1

Type	CP	CP From
List	6	Select from Unit Blocks: Civil Specialist - Breadth Civil Specialist - Depth Project Management Electives
Engineering Core	6	Select from CIVL4022: Thesis A
Project Management Core	6	Select from PMGT3858: Adapting to Project Context
Civil Stream Core	6	Select from CIVL4903: Civil Engineering Design

Year 5 - Semester 2

Type	CP	CP From
List	6	Select from Unit Blocks: Civil Specialist - Breadth Civil Specialist - Depth Project Management Electives
Engineering Core	6	Select from CIVL4023: Thesis B
Project Management Core	6	Select from ENGG3854: Legal Aspects of Projects
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4 Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. ENGG3112 can be taken in this semester, or earlier by switching an elective.

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
CIVL4203	Major Industrial Project	24	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CIVL4203 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Civil Stream Core (Min CP: 108,Max CP: 108)

Unit Code	Unit Name	CP	Sessions Offered
CIVL1802	Statics	6	Semester 1 Int January Int July
CIVL1810	Engineering Construction and Surveying	6	Semester 2
CIVL1900	Introduction to Civil Engineering	6	Semester 1
CIVL2010	Environmental Engineering	6	Semester 2
CIVL2110	Materials	6	Semester 1 Semester 2
CIVL2201	Structural Mechanics	6	Semester 1
CIVL2410	Soil Mechanics 1	6	Semester 2
CIVL2611	Introductory Fluid Mechanics	6	Semester 2
CIVL2700	Transport Systems	6	Semester 1
CIVL2812	Project Appraisal	6	Semester 2
CIVL3205	Concrete Structures 1	6	Semester 1
CIVL3206	Steel Structures 1	6	Semester 2
CIVL3612	Fluid Mechanics	6	Semester 1
CIVL3811	Engineering Design and Construction	6	Semester 2
CIVL4903	Civil Engineering Design	6	Semester 1 Semester 2
ENGG1801	Engineering Computing	6	Semester 1 Int January
ENGG1810	Introduction to Engineering Computing	6	Semester 1 Semester 2 Int February
GEOL1501	Engineering Geology 1	6	Semester 2
MATH2061	Linear Mathematics and Vector Calculus	6	Semester 1 Summer Main

Block 3 - Project Management Core (Min CP: 84,Max CP: 84)

Unit Code	Unit Name	CP	Sessions Offered
ENGG1850	Introduction to Project Management	6	Semester 1
ENGG1860	Project Initiation & Scope	6	Semester 1
ENGG1863	Effective Project Communication	6	Semester 1
ENGG1865	Project Time, Cost and Resources	6	Semester 2
ENGG2851	Project Analytics	6	Semester 1
ENGG2855	Project Acceptance	6	Semester 1
ENGG3854	Legal Aspects of Projects	6	Semester 1 Semester 2
PMGT1711	Systems Thinking in Projects	6	Semester 2
PMGT1852	Facilitation and Stakeholder Engagement	6	Semester 2
PMGT2711	Critical Thinking for Projects	6	Semester 1
PMGT2821	Project Conflict Management	6	Semester 2
PMGT2822	Reframing Projects	6	Semester 2
PMGT2854	Executing Projects	6	Semester 2
PMGT3858	Adapting to Project Context	6	Semester 1

Note: In 2024, ENGG units will be re-coded to PMGT.

Block 4 - Civil Specialist - Breadth (Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
CIVL3235	Structural Analysis	6	Semester 2
CIVL3310	Humanitarian Engineering	6	Semester 1
CIVL3411	Geotechnical Engineering 1	6	Semester 2
CIVL3511	Basics of Integrated Building Engineering	6	Semester 1
CIVL3614	Hydrology	6	Semester 2
CIVL3704	Transport Informatics	6	Semester 1
CIVL3705	Transport Design: Sustainable and Safe Access	6	Semester 1
CIVL3805	Project Scope, Time and Cost Management	6	Semester 1

Note: You may choose up to 12 credit points of Civil Electives in place of 12 credit points of PM Electives

Block 5 - Civil Specialist - Depth (Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
CIVL4203	Major Industrial Project	24	Semester 1 Semester 2
CIVL4810	Mgmnt of People, Quality and Risk in PE	6	Semester 2
CIVL4813	Contracts Formulation and Management	6	Semester 2
CIVL4814	Project Procurement and Tendering	6	Semester 2
CIVL4815	Project Formulation	6	Semester 1
CIVL5266	Steel Structures - Stability	6	Semester 1
CIVL5269	Advanced Concrete Structures	6	Semester 2
CIVL5276	Bridge Engineering	6	Semester 1
CIVL5277	Structural Rehabilitation and Timber Design	6	Semester 2
CIVL5320	Engineering for Sustainable Development	6	Semester 2
CIVL5330	Global Engineering Field Work	6	Int July
CIVL5351	Geoenvironmental Engineering	6	Semester 2
CIVL5452	Geotechnical Engineering 2	6	Semester 1
CIVL5453	Geotechnical Hazards	6	Semester 2
CIVL5458	Numerical Methods in Civil Engineering	6	Semester 1
CIVL5460	Soil Mechanics 2	6	Semester 1
CIVL5531	Advanced Integrated Building Engineering	6	Semester 1
CIVL5533	Energy-efficient Building Systems	6	Semester 2
CIVL5535	Building Envelope and Adaptive Engineering	6	Semester 2
CIVL5665	Water Supply for Towns and Cities	6	Semester 2
CIVL5668	Fundamentals of Wind Engineering for Design	6	Semester 1
CIVL5670	Reservoir, Stream and Coastal Engineering	6	Semester 1
CIVL5701	Transport Networks	6	Semester 2
CIVL5702	Traffic Engineering	6	Semester 1
CIVL5703	Transport Policy, Planning and Deployment	6	Semester 1
CIVL5704	Transport Analytics	6	Semester 2
CIVL5999	Advanced Research and Analysis	6	Semester 1
ENGG3801	Industry and Community Project	6	Semester 1 Semester 2