1. Overview

Course:	Biomedical / Science (Medical Science Stream) (2024)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018

2. Requirements

Summary

In summary, the requirements are:

Students must complete 240 credit points as follows:

Engineering (ˆ168 credit points):

► 6 credit points of Introductory Computing units

► 12 credit points of Foundations Mathematics units

► 30 credit points of Project units (including Thesis)

► The Professional Engagement Program comprising ENGP1001 (0cp), ENGP1002 (0cp), ENGP1003 (0cp), ENGP2001 (0cp), ENGP2002 (0cp), ENGP2003 (0cp), ENGP3001 (0cp) and ENGP3002 (0cp)

► 72 credit points of Biomedical stream core units

► 6 credit points of Biomedical Stream Industry/Enterprise units

► 36 credit points of Biomedical Stream electives

The completion of a specialisation is not mandatory. If a student chooses to do a specialisation it must be completed within the 168 credit points outlined above. Specialisations are listed in the 'Majors/Pathways' tab.

ˆ Students in the combined degree with Science (Medical Science stream) are exempt from BMET2901 as the equivalent is covered in the MedSci component of the degree, and therefore enrol in 162 cp of Engineering units.

Science (Medical Science Stream) (*84 credit points):

► 24 credit points of Science degree core units (12cp of Mathematics in Engineering Core and 12cp 1000-level MedSci units meet this requirement)

► 72 credit points of Medical Science units (note that CHEM1111 is also in the Biomedical stream, students therefore complete 66cp Medical Science units)

► 6 credit points of OLE units

► 6 credit points of Science Table A units

* With units taken as part of the Engineering component, students enrol in 78cp Science in total.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Medical Science Stream	6	Select from MEDS1001: Human Biology
Professional Engagement Program (PEP) Table	0	Select from ENGP1001: Professional Engagement Program 1A Note: All students must enrol in ENGP1001 in their first semester of enrolment.
Projects Table	6	Select from BMET1960: Biomedical Engineering 1A
Foundation Mathematics Table	6	Select from MATH1061: Mathematics 1A
Introductory Computing Units	6	Select from ENGG1810: Introduction to Engineering Computing

Note: MATH1061 may be replaced by advanced unit MATH1961.

Equivalent advanced level units can replace Medical Science Stream units, subject to prerequisite conditions being met. Students should seek advice from their department before enrolling.

Year 1 - Semester 2

Type	CP	CP From
Medical Science Stream	6	Select from BIOL1007: From Molecules to Ecosystems
Professional Engagement Program (PEP) Table	0	Select from ENGP1002: Professional Engagement Program 1B
Biomedical Stream Core	6	Select from BMET1961: Biomedical Engineering 1B
Foundation Mathematics Table	6	Select from MATH1062: Mathematics 1B
Medical Science Stream	6	Select from MEDS1002: Essentials of Human Anatomy

Note: MATH1062 may be replaced by advanced unit MATH1962.

Equivalent advanced level units can replace Medical Science Stream units, subject to prerequisite conditions being met. Students should seek advice from their department before enrolling.

Year 2 - Semester 1

Type	CP	CP From
Professional Engagement Program (PEP) Table	0	Select from ENGP1003: Professional Engagement Program 1C
Biomedical Stream Core	6	Select from BMET2903: Biomedical Physics
Biomedical Stream Core	6	Select from BMET2902: Introduction to Bioelectronics
Biomedical Stream Core	6	Select from CHEM1111: Chemistry 1A
Projects Table	6	Select from ENGG2112: Multi-disciplinary Engineering

Year 2 - Semester 2

Type	CP	CP From
Biomedical Stream Core	6	Select from AMME1362: Introduction to Engineering Materials
Biomedical Stream Core	6	Select from BMET2922: Computational Analysis for Biomedical Signals
Biomedical Stream Core	6	Select from AMME1802: Engineering Mechanics
Professional Engagement Program (PEP) Table	0	Select from ENGP2001: Professional Engagement Program 2A
Medical Science Stream	6	Select from MEDS2013: Frontiers of Human Health

Year 3 - Semester 1

Type	CP	CP From
Biomedical Stream Core	6	Select from BMET3660: Biomanufacturing
Medical Science Stream	6	Select from MEDS2003: Biochemistry and Molecular Biology
Professional Engagement Program (PEP) Table	0	Select from ENGP2002: Professional Engagement Program 2B
Biomedical Stream Core	6	Select from BMET2960: Biomedical Engineering 2
Medical Science Stream	6	Select from MEDS2011: The Human Lifespan

Year 3 - Semester 2

Type	CP	CP From
Professional Engagement Program (PEP) Table	0	Select from ENGP2003: Professional Engagement Program 2C
Biomedical Stream Core	6	Select from BMET3961: Biomaterials
Projects Table	6	Select from ENGG3112: Interdisciplinary Engineering Note: Students may take ENGG3112 in Year 4 Semester 1 and complete a stream elective in Semester 2 instead
Medical Science Stream	6	Select from MEDS2012: Humans and Our Environment
Science Units	6	Select from Unit Block: Science Units Note: 6 credit points of OLEs

Year 4 - Semester 1

Type	CP	CP From
Professional Engagement Program (PEP) Table	0	Select from ENGP3001: Professional Engagement Program 3A
Biomedical Stream Core	6	Select from BMET3971: Tissue Engineering
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Science Units	6	Select from Unit Block: Science Units
Medical Science Stream	6	Select from MEDS3001: Contemporary Medical Challenges

Year 4 - Semester 2

Type	CP	CP From
Medical Science Stream	6	Select from MEDS3888: Medical Science Interdisciplinary Project
Professional Engagement Program (PEP) Table	0	Select from ENGP3002: Professional Engagement Program 3B
Biomedical Stream Core	6	Select from BMET3921: Biomedical Design and Technology Note: Students can do BMET3921 in Semester 1
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Biomedical Industry/Enterprise Units	6	Select from BMET3990: Biomedical Product Development BMET5992: Regulatory Affairs in the Medical Industry Note: Students may take Industry/Enterprise unit BMET5953 in place of a Stream Elective in Semester 1, and take a Biomedical Stream Elective in this slot instead

Year 5 - Semester 1

Type	CP	CP From
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Projects Table	6	Select from BMET4111: Thesis A
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Medical Science Stream	6	Select from MEDS3002: Breakthroughs in Medical Science

Year 5 - Semester 2

Type	CP	CP From
Projects Table	6	Select from BMET4112: Thesis B
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Medical Science Stream	6	Select from MEDS3003: Horizons in Medical Sciences

5. Unit Blocks

Block 0 - Introductory Computing Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
ENGG1810	Introduction to Engineering Computing	6	Semester 1 Semester 2 Int February
INFO1110	Introduction to Programming	6	Semester 1 Semester 2
INFO1910	Introduction to Programming (Advanced)	6	Semester 1 Semester 2

Note: Students must complete:

-6cp from ENGG1810 or (INFO1110 or INFO1910). For Biomedical stream students it is recommended that ENGG1810 is taken.

Block 1 - Foundation Mathematics Table (Min CP: 12,Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
MATH1061	Mathematics 1A	6	Semester 1 Semester 2
MATH1062	Mathematics 1B	6	Semester 1 Semester 2
MATH1961	Mathematics 1A (Advanced)	6	Semester 1
MATH1962	Mathematics 1B (Advanced)	6	Semester 2

Block 2 - Projects Table (Min CP: 30,Max CP: 30)

Unit Code	Unit Name	CP	Sessions Offered
AERO1560	Introduction to Aerospace Engineering	6	Semester 1
BMET1960	Biomedical Engineering 1A	6	Semester 1
BMET4111	Thesis A	6	Semester 1 Semester 2
BMET4112	Thesis B	6	Semester 1 Semester 2
CHNG1108	Introduction to Chemical Engineering	6	Semester 1
CIVL1900	Introduction to Civil Engineering	6	Semester 1
ELEC1004	Practical Introduction to Electrical Engineering	6	Semester 1
ELEC1005	Introduction to Software Engineering	6	Semester 1
ENGG1800	Introduction to Engineering A	6	Semester 1
ENGG2112	Multi-disciplinary Engineering	6	Semester 1 Semester 2
ENGG3112	Interdisciplinary Engineering	6	Semester 1 Semester 2
MECH1560	Introduction to Mechanical Engineering	6	Semester 1
MTRX1701	Introduction to Mechatronic Engineering	6	Semester 1

Note: - Students are to select the introduction unit relevant to their stream.

- Students are to select the thesis units relevant to their stream. Aeronautical, Mechanical and Mechatronic students are to enrol in the AMME coded units. Students in both Electrical and Software are to enrol in the ELEC coded units.

Block 3 - Professional Engagement Program (PEP) Table

Unit Code	Unit Name	CP	Sessions Offered
ENGP1001	Professional Engagement Program 1A	0	Semester 1 Semester 2
ENGP1002	Professional Engagement Program 1B	0	Semester 1 Semester 2
ENGP1003	Professional Engagement Program 1C	0	Semester 1 Semester 2
ENGP2001	Professional Engagement Program 2A	0	Semester 1 Semester 2
ENGP2002	Professional Engagement Program 2B	0	Semester 1 Semester 2
ENGP2003	Professional Engagement Program 2C	0	Semester 1 Semester 2
ENGP3001	Professional Engagement Program 3A	0	Semester 1 Semester 2
ENGP3002	Professional Engagement Program 3B	0	Semester 1 Semester 2

Note: -Candidates for the Bachelor of Engineering Honours must complete the Professional Engagement Program units of study.

- Candidates must enrol in ENGP1001 in their first semester of study

Block 4 - Biomedical Stream Core (Min CP: 72,Max CP: 72)

Unit Code	Unit Name	CP	Sessions Offered
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME1802	Engineering Mechanics	6	Semester 2
BMET1961	Biomedical Engineering 1B	6	Semester 2
BMET2902	Introduction to Bioelectronics	6	Semester 1
BMET2903	Biomedical Physics	6	Semester 1
BMET2922	Computational Analysis for Biomedical Signals	6	Semester 2
BMET2960	Biomedical Engineering 2	6	Semester 1
BMET3660	Biomanufacturing	6	Semester 1
BMET3921	Biomedical Design and Technology	6	Semester 1 Semester 2
BMET3961	Biomaterials	6	Semester 2
BMET3971	Tissue Engineering	6	Semester 1
CHEM1111	Chemistry 1A	6	Semester 1 Semester 2 Int January

Block 5 - Biomedical Industry/Enterprise Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
BMET3990	Biomedical Product Development	6	Semester 2
BMET5953	Rehabilitation Engineering	6	Semester 1
BMET5992	Regulatory Affairs in the Medical Industry	6	Semester 2

Block 6 - Biomedical Stream Electives (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME2301	Mechanics of Solids	6	Semester 2
BMET2400	Biomechanical Design	6	Semester 1
BMET2925	AI, Data, and Society in Health	6	Semester 1 Semester 1 Online
BMET3802	Biomedical Instrumentation	6	Semester 2
BMET3962	Introduction to Mechanobiology	6	Semester 2
BMET3990	Biomedical Product Development	6	Semester 2
BMET3997	Biological Digital Signal Analysis	6	Semester 1
BMET4010	Major Industrial Project	24	Semester 1 Semester 2
BMET4981	Applied Biomedical Engineering	6	Semester 2
BMET5790	Introduction to Biomechatronics	6	Semester 2
BMET5907	Orthopaedic and Surgical Engineering	6	Semester 2
BMET5911	Instrumentation for Nanotechnology	6	Semester 1
BMET5931	Nanomaterials in Medicine	6	Semester 1
BMET5933	Biomedical Image Analysis	6	Semester 1
BMET5934	Biomedical Machine Learning	6	Semester 2
BMET5935	Biomedical Application in Genetic Technology	6	Semester 1
BMET5944	Nanofabrication and Bioinspired Materials	6	Semester 2
BMET5953	Rehabilitation Engineering	6	Semester 1
BMET5957	Neural Engineering	6	Semester 2
BMET5958	Nanoscale Biomedical Diagnostics	6	Semester 1
BMET5959	Introduction to Biophotonics	6	Semester 1
BMET5962	Introduction to Mechanobiology	6	Semester 2
BMET5963	Microfluidics in Healthcare	6	Semester 2
BMET5964	Advanced Cellular Biomechanics	6	Semester 2
BMET5992	Regulatory Affairs in the Medical Industry	6	Semester 2
BMET5995	Advanced Bionics	6	Semester 1
BMET5996	Biomedical Technology Software	6	Semester 2
MECH3361	Mechanics of Solids 2	6	Semester 2

Block 7 - Specialisation - Biocomputation Units (Max CP: 30)

Unit Code	Unit Name	CP	Sessions Offered
BMET2925	AI, Data, and Society in Health	6	Semester 1 Semester 1 Online
BMET3997	Biological Digital Signal Analysis	6	Semester 1
BMET5790	Introduction to Biomechatronics	6	Semester 2
BMET5933	Biomedical Image Analysis	6	Semester 1
BMET5934	Biomedical Machine Learning	6	Semester 2
BMET5995	Advanced Bionics	6	Semester 1
BMET5996	Biomedical Technology Software	6	Semester 2

Block 8 - Specialisation - Biomedical Modelling and Design Core Units (Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
AMME2301	Mechanics of Solids	6	Semester 2
BMET2400	Biomechanical Design	6	Semester 1
BMET4981	Applied Biomedical Engineering	6	Semester 2
MECH3361	Mechanics of Solids 2	6	Semester 2

Block 9 - Specialisation - Biomedical Modelling and Design Elective Units (Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
BMET5907	Orthopaedic and Surgical Engineering	6	Semester 2
BMET5944	Nanofabrication and Bioinspired Materials	6	Semester 2

Block 10 - Specialisation - Bionics and Bioelectronics Core Units (Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
BMET3802	Biomedical Instrumentation	6	Semester 2
BMET5957	Neural Engineering	6	Semester 2
BMET5995	Advanced Bionics	6	Semester 1

Block 11 - Specialisation - Bionics and Bioelectronics Elective Units (Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
BMET3997	Biological Digital Signal Analysis	6	Semester 1
BMET5790	Introduction to Biomechatronics	6	Semester 2
BMET5911	Instrumentation for Nanotechnology	6	Semester 1
BMET5934	Biomedical Machine Learning	6	Semester 2
BMET5959	Introduction to Biophotonics	6	Semester 1
BMET5996	Biomedical Technology Software	6	Semester 2

Block 12 - Specialisation - Nanoscale Biotechnology Core Units (Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
BMET3962	Introduction to Mechanobiology	6	Semester 2

Block 13 - Specialisation - Nanoscale Biotechnology Elective Units (Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
BMET5911	Instrumentation for Nanotechnology	6	Semester 1
BMET5931	Nanomaterials in Medicine	6	Semester 1
BMET5935	Biomedical Application in Genetic Technology	6	Semester 1
BMET5944	Nanofabrication and Bioinspired Materials	6	Semester 2
BMET5958	Nanoscale Biomedical Diagnostics	6	Semester 1
BMET5959	Introduction to Biophotonics	6	Semester 1
BMET5963	Microfluidics in Healthcare	6	Semester 2
BMET5964	Advanced Cellular Biomechanics	6	Semester 2

Block 14 - Medical Science Stream (Min CP: 66,Max CP: 66)

Unit Code	Unit Name	CP	Sessions Offered
BIOL1007	From Molecules to Ecosystems	6	Semester 2
MEDS1001	Human Biology	6	Semester 1
MEDS1002	Essentials of Human Anatomy	6	Semester 2
MEDS2003	Biochemistry and Molecular Biology	6	Semester 1
MEDS2011	The Human Lifespan	6	Semester 1
MEDS2012	Humans and Our Environment	6	Semester 2
MEDS2013	Frontiers of Human Health	6	Semester 2
MEDS3001	Contemporary Medical Challenges	6	Semester 1 Semester 2
MEDS3002	Breakthroughs in Medical Science	6	Semester 1 Semester 2
MEDS3003	Horizons in Medical Sciences	6	Semester 1 Semester 2
MEDS3888	Medical Science Interdisciplinary Project	6	Semester 2

Block 15 - Science Units (Min CP: 12,Max CP: 12)

Note: Candidates must complete 84 credit points of Science (Medical Science stream) study, including:

- 66 cp Medical Science core units

- 6 cp of OLEs

- 6 cp of Science Table A

With Math units taken as part of the Engineering component, and students taking a Science Table A in place of Biomedical unit BMET2901, students take 78 cp Science total. See Science faculty handbook for list of Science units: http://sydney.edu.au/handbooks/science/

Faculty of Engineering

Biomedical / Science (Medical Science Stream) (2024)