Note: This course version is currently under review and is subject to change.

ProgramsEngENGI (UG)BEHons CombinedBE/BPM 2019+Mechanical / Project Management 2019+ (2019)


Show information forcommencing students (ie. started First Year then).
 
Faculty of Engineeringengineering.undergraduate@sydney.edu.au
ASK ABOUT THIS COURSE


Print View | Download as PDF Administrative Information (Fees, ATAR etc.)

Select plan for Major/Pathway

Year 1 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1021: Calculus of One Variable
3MATH1002: Linear Algebra
6ENGG1850: Introduction to Project Management
6ENGG1801: Engineering Computing
6MECH1560: Introduction to Mechanical Engineering
0ENGP1000: Professional Engagement Program 1


Note:  All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note:   From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
3MATH1005: Statistical Thinking with Data
3MATH1023: Multivariable Calculus and Modelling
6PMGT1852: Facilitation and Stakeholder Engagement
6AMME1362: Introduction to Engineering Materials
6ENGG1802: Engineering Mechanics

Note:   From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ENGG1860: Project Initiation & Scope
6AMME2000: Engineering Analysis
6AMME2261: Fluid Mechanics 1
6AMME2500: Engineering Dynamics

Year 2 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ENGG1111: Integrated Engineering 1
6PMGT1711: Systems Thinking in Projects
6AMME2301: Mechanics of Solids
6MECH2400: Mechanical Systems Design 1


Note:  From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor.

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 3 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6PMGT2711: Critical Thinking for Projects
6ENGG1863: Effective Project Communication
6MECH3261: Fluid Mechanics 2
0ENGP2000: Professional Engagement Program 2


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
6AMME2700: Instrumentation


Note:  AMME2700 is discontinued. Students who have not yet completed this unit should take AMME1705 in its place.

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 3 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ENGG1865: Project Time, Cost and Resources
6AMME2262: Introduction to Thermal Engineering
6MECH3460: Mechanical Systems Design 2
6MECH3361: Mechanics of Solids 2
2ENGG2111: Integrated Engineering 2

Year 4 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
2ENGG3111: Integrated Engineering 3
6ENGG2851: Project Analytics
6ENGG2855: Project Acceptance
6MECH3362: Engineering Materials for Adv Manufacturing
6AMME3500: System Dynamics and Control

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 4 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6PMGT2854: Executing Projects
6PMGT2822: Reframing Projects
6PMGT2821: Project Conflict Management
6MECH3260: Thermal Engineering and Environment
0ENGP3000: Professional Engagement Program 3


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 5 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
List
6Select from
Mechanical Specialist Electives
Project Management Electives
2ENGG4111: Integrated Engineering 4
6AMME4111: Thesis A
6PMGT3858: Adapting to Project Context
6MECH3660: Manufacturing Engineering

Note:   Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.

Year 5 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
List
6Select from
Mechanical Specialist Electives
Project Management Electives
6AMME4112: Thesis B
6ENGG3854: Legal Aspects of Projects

Additional Requirements for Major

TypeCPCP From
6Select from
MECH1560: Introduction to Mechanical Engineering
18Select from
AERO2705: Space Engineering 1
AERO3760: Space Engineering 2
AERO4701: Space Engineering 3
12Select from
AMME4111: Thesis A
AMME4112: Thesis B
12Select from
Space Specialist Electives

Students are required to complete 48cp of units as listed, to be eligible of this major. There are minimum ATAR (>99) or WAM (>75%) entry requirements for enrolment in this major.

Students undertaking this major are not required to do Integrated Engineering units (ENGG1111, ENGG2111, ENGG3111, ENGG4111), and are exempt from AMME2000 and MECH3460.
Course: Mechanical / Project Management 2019+ (2019)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019
Requirements: Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Mechanical stream core units

Project Management:

► 84 credit points of Project Management core units

Electives:

► 12 credit points of Project Management elective units or Mechanical Specialist elective units

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete 96 credit points comprising:

(i) 84 credit points of core units as set out in the Bachelor of Project Management Unit of Study Table

(ii) 12 credit points of electives from either the elective units set out in the Bachelor of Project Management Unit of Study Table, or from the Stream Electives in the candidate's Bachelor of Engineering Honours Stream

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/
Report Type: