Faculty of Engineering

Chemical & Biomolecular/ Project Management (2020)


Note: This course version applies only to students first enrolling in 2020.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Chemical & Biomolecular/ Project Management (2020)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2020, 2019

2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 108 credit points of Chemical stream core units

Project Management:

► 84 credit points of Project Management core units

Electives:

► 12 credit points chosen from Project Management elective units or CBE Specialist- Depth elective units

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete 96 credit points comprising:

(i) 84 credit points of core units as set out in the Bachelor of Project Management Unit of Study Table

(ii) 12 credit points of electives from either the elective units set out in the Bachelor of Project Management Unit of Study Table, or from the Stream Electives in the candidate's Bachelor of Engineering Honours Stream

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.
3 Select from MATH1002: Linear Algebra
3 Select from MATH1021: Calculus of One Variable
6 Select from ENGG1850: Introduction to Project Management
6 Select from CHEM1111: Chemistry 1A
6 Select from ENGG1801: Engineering Computing

Note: MATH1021 and MATH1002 may be replaced by advanced units MATH1921 and MATH1902.

Year 1 - Semester 2

Type CP CP From
6 Select from ENGG1111: Integrated Engineering 1
3 Select from MATH1005: Statistics
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from CHNG1103: Conservation of Mass and Energy
6 Select from CHEM1112: Chemistry 1B

Note: MATH1023 and MATH1005 may be replaced by advanced units MATH1923 and MATH1905.

Year 2 - Semester 1

Type CP CP From
6 Select from ENGG1863: Effective Project Communication
6 Select from CHNG2803: Heat and Mass Transfer
6 Select from CHNG2802: Applied Maths for Chemical Engineers
6 Select from CHNG2801: Fluid Mechanics

Year 2 - Semester 2

Type CP CP From
2 Select from ENGG2111: Integrated Engineering 2
6 Select from PMGT1852: Facilitation and Stakeholder Engagement
6 Select from CHNG2806: Separation Processes
6 Select from CHNG2804: Chemical Engineering Thermodynamics
6 Select from CHNG2805: Engineering for a Sustainable Society

Year 3 - Semester 1

Type CP CP From
0 Select from ENGP2000: Professional Engagement Program 2


Note: Enrolment in ENGP2000 is reliant on successful completion of ENGP1000. As such, the placement of ENGP2000 in this structure is example only, and actual enrolment in ENGP2000 is dependent on the time taken to complete ENGP1000.
6 Select from PMGT2711: Critical Thinking for Projects
6 Select from ENGG1860: Project Initiation & Scope
6 Select from CHNG3802: Process Dynamics and Control
6 Select from CHNG3805: Particle Processing

Year 3 - Semester 2

Type CP CP From
6 Select from ENGG1865: Project Time, Cost and Resources
6 Select from PMGT1711: Systems Thinking in Projects
6 Select from CHNG3806: Risk Management for Chemical Engineering
6 Select from CHNG3801: Process Plant Design

Year 4 - Semester 1

Type CP CP From
2 Select from ENGG3111: Integrated Engineering 3
6 Select from PMGT2854: Executing Projects
6 Select from ENGG2851: Project Analytics
6 Select from ENGG2855: Project Acceptance
6 Select from CHNG3803: Reaction Engineering

Note: 1. Combined degree students may choose to take Chemical Engineering Design A & B in the same year as Engineering Project/Honours Thesis, or separately across years 4 and 5 as preferred.

2. Top students may apply to undertake industry-based projects under the Major Industry Placement Scheme. MIPPS students take a single 24 credit points unit (CHNG4203) in place of Honours Thesis Units plus Chemical Engineering Design A and the 6 credit point Recommended Chemical and Biomolecular Electives. See Streams/Majors tab for more details of MIPPS. 12 credit points (two units) from the `Depth` units of study must also be taken in either first or second semester.

Year 4 - Semester 2

Type CP CP From
List
6 Select from Unit Blocks:
CBE Specialist - Depth Electives
Project Management Electives
0 Select from ENGP3000: Professional Engagement Program 3


Note: Enrolment in ENGP3000 is reliant on successful completion of ENGP2000. As such, the placement of ENGP3000 in this structure is example only, and actual enrolment in ENGP3000 is dependent on the time taken to complete ENGP2000.
6 Select from PMGT2821: Project Conflict Management
6 Select from PMGT2822: Reframing Projects
6 Select from CHNG3804: Biochemical Engineering

Year 5 - Semester 1

Type CP CP From
List
6 Select from Unit Blocks:
CBE Specialist - Depth Electives
Project Management Electives
2 Select from ENGG4111: Integrated Engineering 4
6 Select from CHNG4811: Thesis A
6 Select from PMGT3858: Adapting to Project Context
6 Select from CHNG4802: Chemical Engineering Design A

Year 5 - Semester 2

Type CP CP From
6 Select from CHNG4812: Thesis B
6 Select from ENGG3854: Legal Aspects of Projects
6 Select from CHNG4806: Chemical Engineering Design B

4. Pathways

Alternate Thesis Pathway : Major Industrial Project Placement Scheme (MIPPS)

Type CP CP From
Core
24 CHNG4203: Major Industrial Project

Note: MIPPS students take CHNG4203 Major Industrial Project Placement (24 credit points). This unit replaces regular Honours Thesis units (CHNG4811 and CHNG4812) along with CHNG4001 Practical Experience, CHNG4112 Foundation of Chemical Engineering Design A and 6 credit points of electives. Students are admitted to MIPPS by school permission only. Applications are taken in third year of study.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
Semester 2
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
Semester 2
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Summer Main
MATH1005 Statistics 3 Semester 2
Summer Main
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - CBE Stream Core (Min CP: 108,Max CP: 108)

Unit Code Unit Name CP Sessions Offered
CHEM1111 Chemistry 1A 6 Semester 1
Semester 2
CHEM1112 Chemistry 1B 6 Semester 1
Semester 2
CHEM1911 Chemistry 1A (Adv) 6 Semester 1
CHEM1912 Chemistry 1B (Adv) 6 Semester 2
CHNG1103 Conservation of Mass and Energy 6 Semester 2
CHNG2801 Fluid Mechanics 6 Semester 1
CHNG2802 Applied Maths for Chemical Engineers 6 Semester 1
CHNG2803 Heat and Mass Transfer 6 Semester 1
CHNG2804 Chemical Engineering Thermodynamics 6 Semester 2
CHNG2805 Engineering for a Sustainable Society 6 Semester 2
CHNG2806 Separation Processes 6 Semester 2
CHNG3801 Process Plant Design 6 Semester 1
Semester 2
CHNG3802 Process Dynamics and Control 6 Semester 1
CHNG3803 Reaction Engineering 6 Semester 1
CHNG3804 Biochemical Engineering 6 Semester 2
CHNG3805 Particle Processing 6 Semester 1
Semester 2
CHNG3806 Risk Management for Chemical Engineering 6 Semester 2
CHNG4802 Chemical Engineering Design A 6 Semester 1
CHNG4806 Chemical Engineering Design B 6 Semester 2
ENGG1801 Engineering Computing 6 Semester 1
Summer Late

Block 3 - Project Management Core (Min CP: 84,Max CP: 84)

Unit Code Unit Name CP Sessions Offered
ENGG1850 Introduction to Project Management 6 Semester 1
ENGG1860 Project Initiation & Scope 6 Semester 1
Semester 2
ENGG1863 Effective Project Communication 6 Semester 1
Semester 2
ENGG1865 Project Time, Cost and Resources 6 Semester 1
Semester 2
ENGG2851 Project Analytics 6 Semester 1
Summer Main
ENGG2855 Project Acceptance 6 Semester 1
Semester 2
ENGG3854 Legal Aspects of Projects 6 Semester 1
Semester 2
Summer Main
PMGT1711 Systems Thinking in Projects 6 Semester 2
PMGT1852 Facilitation and Stakeholder Engagement 6 Semester 2
Int June
PMGT2711 Critical Thinking for Projects 6 Semester 1
PMGT2821 Project Conflict Management 6 Semester 2
PMGT2822 Reframing Projects 6 Semester 2
PMGT2854 Executing Projects 6 Semester 1
Semester 2
PMGT3858 Adapting to Project Context 6 Semester 1

Block 5 - CBE Specialist - Depth Electives (Max CP: 12)

Unit Code Unit Name CP Sessions Offered
CHNG5001 Process Systems Engineering 6 Semester 2
CHNG5004 Particles and Surfaces 6 Semester 1
CHNG5006 Advanced Wastewater Engineering 6 Semester 2
CHNG5008 Nanotechnology in Chemical Engineering 6 Semester 2
CHNG5601 Membrane Science 6 Semester 1
CHNG5602 Cellular Biophysics [not offered in 2019] 6 Semester 1
CHNG5604 Advanced Membrane Engineering 6 Semester 2
CHNG5606 Advanced Food Processing 6 Semester 2
CHNG5607 Advanced Biochemical Engineering [not offered in 2019] 6 Semester 1

Block 6 - Project Management Electives (Max CP: 12)

Unit Code Unit Name CP Sessions Offered
ENGG2850 Project Cost and Finance 6 Semester 1
PMGT3611 Projects in Controlled Environment 6 Semester 1
PMGT3612 Agile Project Management 6 Semester 1
PMGT3623 Scheduling 6 Semester 2
PMGT3624 Change & Transformation 6 Semester 2
PMGT3856 Sustainability & Knowledge Management 6 Semester 1
PMGT3857 International Project Management 6 Semester 2

Note: You may choose up to 12 credit points of PM Electives in place of 12 credit points of CBE Specialist- Depth Electives