Note: This course version is currently under review and is subject to change.
ProgramsEngENGI (PG)MPE/MPEAMPEMPE to 2024Master of Professional Engineering (Electrical) (2022)
Show information forcommencing students (ie. started First Year then).
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | COMP9001: Introduction to Programming |
Core | 6 | COMP9123: Data Structures and Algorithms |
Core | 6 | ELEC9602: Digital Logic |
Core | 6 | ELEC9703: Fundamentals of Electrical and Electronic Engineering |
Note: Year One covers Foundation units only. Candidates with a prior Bachelor of Engineering degree or equivalent in the field related to this specialisation may be exempted from Foundation units.
Year 1 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | ELEC9103: Simulations & Numerical Solutions in Eng |
Core | 6 | ELEC9302: Signals and Systems |
Core | 6 | ELEC9601: Computer Systems |
Core | 6 | ELEC9704: Electronic Devices and Circuits |
Note: Year One covers foundation units only. Students with a prior Bachelor of Engineering degree or equivalent in the field related to this specialisation are exempt from these foundation units.
Year 2 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | ENGG5202: Sustainable Design, Engineering & Management |
Core | 6 | ENGG5204: Engineering Professional Practice |
| 12 | Select from Foundation Units |
Note: Students need to complete 24 credit points of Foundation Units across Year Two. 12 credit points is recommended for each semester, but students may take more or less in each semester as long as the final total for the year as a whole is 24 credit points.
Year 2 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
List | 12 | Select from Electrical Electives Management Electives |
| 12 | Select from Foundation Units |
Note: Students need to complete 24 credit points of Foundation Units across Year Two plus 36 credit points of Electrical Electives and 12 credit points of Management Units for the degree as a whole. The Electrical Electives and Management Units may be completed in Year Two or Year Three as preferred.
Year 3 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | ELEC5020: Capstone Project A Note: See Majors/Pathways tab for full details. Students achieving an average mark of 75% or higher are eligible for the Research Pathway and may replace ELEC5020 and 6cp of recommended electives with ELEC5222 Dissertation A. |
Core | 0 | ENGG5217: Practical Experience |
List | 18 | Select from Electrical Electives Management Electives |
Note: 36 credit points of Electrical Electives and 12 credit points of Management Units must be completed across the degree as a whole. The Electrical Electives and Management Units may be completed in Year Two or Year Three as preferred.
Year 3 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
Core | 6 | ELEC5021: Capstone Project B Note: See Majors/Pathways tab for full details. Students achieving an average mark of 75% or higher are eligible for the Research Pathway and may replace ELEC5021 and 6cp of recommended electives with ELEC5223 Dissertation B. |
List | 18 | Select from Electrical Electives Management Electives |
Note: 36 credit points of Electrical Electives and 12 credit points of Management Units must be completed across the degree as a whole. The Electrical Electives and Management Units may be completed in Year Two or Year Three as preferred.
Additional Requirements for Major
| Type | CP | CP From |
Core | 24 | ELEC5010: Major Industry Project |
Candidates take ELEC5010 in place of ENGG5217 Practical Experience, ELEC5020/ELEC5021 Capstone Project A & B and 12 credit points of Elective units of study.
Capstone Project
| Type | CP | CP From |
Core
|
6 |
ELEC5020: Capstone Project A |
Core
|
6 |
ELEC5021: Capstone Project B |
| View complete Program Structure | ||
Note: Capstone Project must be completed by all students, unless undertaking Research Pathway (conditions below). Capstone Project is normally completed across two semesters in two stages through ELEC5020 (6cp) and ELEC5021 (6cp). However, it may also be completed in a single semester (12 cp).
Extended Capstone Project
| Type | CP | CP From |
Core
|
6 |
ELEC5020: Capstone Project A |
Core
|
12 |
ELEC5022: Capstone Project B Extended |
| View complete Program Structure | ||
Note:
Students take Capstone Project units ELEC5020 and ELEC5022 (total 18 cp) in place of Capstone Project ELEC5021 and 6 cp of elective units.
Students achieving an average mark of 70% or higher are eligible for the Extended Capstone Project.
Major Industrial Project
| Type | CP | CP From |
Core
|
24 |
ELEC5010: Major Industry Project |
| View complete Program Structure | ||
Note: Candidates take ELEC5010 in place of ENGG5217 Practical Experience, ELEC5020/ELEC5021 Capstone Project A & B and 12 credit points of Elective units of study.
Research Pathway
| Type | CP | CP From |
Core
|
12 |
ELEC5222: Dissertation A |
Core
|
12 |
ELEC5223: Dissertation B |
| View complete Program Structure | ||
Note:
Research pathway students take Dissertation units Research pathway students take Dissertation units ELEC5222 and ELEC5223 (total 24 cp) in place of Capstone Project units and 12 cp of elective units.
Students achieving an average mark of 75% or higher are eligible for the Research Pathway.
Block 1 - Foundation Units (Min CP: 24,Max CP: 24)
Block 2 - Electrical Electives (Min CP: 36,Max CP: 36)
Block 3 - Management Electives (Min CP: 12,Max CP: 12)
Note: From 2023, ENGG5205 is replaced with PMGT5205.
Block 4 - Exchange Units (Max CP: 12)
Note: Summer/Winter Exchange units require the approval of the Program Director. With approval, up to 12 credit points of Exchange units may taken in place of other units, towards the requirements of the degree.
| Course: | Master of Professional Engineering (Electrical) (2022) |
| CP Required: | 144 |
| Min FT Duration: | 3.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010 |
| Requirements: | To qualify for the award of the Master of Professional Engineering in this specialisation, a candidate must complete 144 credit points, including: (a) 60 credit points of Core units as listed (b) ENGG5217 Practical Experience (c) 24 credit points of Foundation units (d) 36 credit points of Electrical Elective units (e) 12 credit points of Management Elective units (f) A minimum of 12 credit points of Project or Research Pathway units (g) Candidates undertaking the Research Pathway, replace 12 credit points of elective units with Research Pathway units Admission to candidature Admission to candidature requires: EITHER (a) a Bachelor of Engineering from the University of Sydney, OR (b) equivalent qualification, with a minimum credit average; OR (c) a non-engineering bachelor's degree with a minimum credit average, with studies equivalent to 48 credit points in mathematics, physics, chemistry, biology, geology, computing or statistics, as related to the intended engineering specialisation. All candidates for admission must have prior learning equivalent to 48 credit points in total, which, in the estimation of the Dean, is comparable to the requirements for the first year of a Bachelor of Engineering at this University in the stream sought for admission. Credit for previous study Candidates with a Bachelor of Engineering or equivalent in the relevant discipline, and who have reached an acceptable level of academic achievement in their prior degree, may be eligible for a reduction of volume in learning of up to 48 credit points. A maximum of 72 credit points may be granted towards the Master of Professional Engineering from external postgraduate studies where no award has been, or will be made, provided the studies are acceptable to the Program Director Dean and are equivalent to units of study offered in the Master of Professional Engineering. Candidates transferring from the Master of Engineering to the Master of Professional Engineering may transfer up to 24 credit points provided units are equivalent to units of study offered in the Master of Professional Engineering. Any additional credit is subject to the approval by the Dean. Progression Candidates are required to meet the progression requirements as specified in the University's Coursework Rule. Transitional provisions These rules apply to students who commenced their candidature after 1 January 2015 and students who commenced their candidature prior to 1 January 2015 who elect to proceed under these resolutions. Candidates who commenced prior to 1 January 2015 may complete the requirements in accordance with the resolutions in force at the time of their commencement. Changes from 2015 Students continuing from 2014 and earlier should note changes of code and name for previous "Foundations" units. The unit code on these units has changed from "5xxx" format to "9xxx" and the prefix "Foundations of" has been dropped. The name and content of these units, otherwise remains as previous. Level 5xxx "Foundations" units that have already been completed will be credited towards the degree in place of the equivalent 9xxx unit. Course resolutions This course is administered under course resolutions published in the Faculty Handbook at http://sydney.edu.au/handbooks/ |
