|
Faculty of Engineering |
|
|
Faculty of Engineering |
| Course: | Biomedical /Science (2017) |
| CP Required: | 240 |
| Min FT Duration: | 5.00 Years |
| Min PT Duration: | 5.00 Years |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
| Type | CP | CP From |
| 6 |
Select from
CHEM1101: Chemistry 1A Note: This unit is discontinued from 2018. Replacement unit is CHEM1111. |
|
| 6 |
Select from
Unit Block: Science Junior Units Note: Science/Engineering(Hons) combined degrees require 240 credit points, comprising 96 credit points from Science subject areas, with a major in one Science discipline, plus units prescribed for the Engineering specialisation. Science units forming part of core requirements in the Biomedical Engineering specialisation may be counted as part of the 96 credit point Science requirement. Consult resolutions for Combined Engineering(Hons) /Science degree in Faculty handbooks for further details. |
|
| 6 |
Select from
AMME1960: Biomedical Engineering 1A |
|
| 3 |
Select from
MATH1002: Linear Algebra |
|
| 3 |
Select from
MATH1001: Differential Calculus Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
Note:
In the BE/BSc program the 18 cp of core subjects MATH#### and CHEM1101 may count to both the science and the engineering degrees. For all subjects which fall in this category the student must fulfill the credit point requirements for the combined degree by completing additional Biomedical electives and/or Science subjects.
MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.
| Type | CP | CP From |
| 6 |
Select from
ENGG1802: Engineering Mechanics |
|
| 6 |
Select from
Unit Block: Science Junior Units |
|
| 6 |
Select from
AMME1961: Biomedical Engineering 1B |
|
| 3 |
Select from
MATH1005: Statistical Thinking with Data |
|
| 3 |
Select from
MATH1003: Integral Calculus and Modelling Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.
| Type | CP | CP From |
| 6 |
Select from
ELEC1103: Fundamentals of Electrical and Electronic Engineering |
|
| 6 |
Select from
AMME2960: Biomedical Engineering 2 |
|
List
|
6 |
Select from
Unit Blocks: Science Junior Units Science Intermediate Units |
| 6 |
Select from
ENGG1801: Engineering Computing Note: Students wishing to major in Computer Science can replace this unit with INFO1103. INFO1103 is discontinued from 2018. Replacement unit is INFO1110. |
| Type | CP | CP From |
| 6 |
Select from
ENGG1111: Integrated Engineering 1 |
|
| 6 |
Select from
MECH2901: Anatomy and Physiology for Engineers |
|
| 6 |
Select from
AMME1362: Introduction to Engineering Materials |
|
List
|
6 |
Select from
Unit Blocks: Science Junior Units Science Intermediate Units |
Note: ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students.
| Type | CP | CP From |
List
|
24 |
Select from
Unit Blocks: Science Junior Units Science Intermediate Units Science Senior Units |
Note: Sufficient Science Units of Study at Intermediate and Senior levels need to be spread over 3rd and 4th year to meet the 96cp requirement of the Science component. Students must also ensure they meet the requirements for a Science Major which is typically 24cp of senior science units in a specific field of study (consult the Science Handbook). Note, Science units in the common core of 1st year and 2nd year contribute to the BSc total. Therefore a minimum of an additional 60cp (10 units) must be completed in order to meet the 96cp of Science requirement.
| Type | CP | CP From |
| 2 |
Select from
ENGG2111: Integrated Engineering 2 |
|
| 6 |
Select from
ELEC2104: Electronic Devices and Circuits |
|
| 6 |
Select from
MECH3921: Biomedical Design and Technology |
|
List
|
6 |
Select from
Unit Blocks: Science Junior Units Science Intermediate Units Science Senior Units |
| 6 |
Select from
MECH2400: Mechanical Systems Design 1 |
Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.
| Type | CP | CP From |
| 6 |
Select from
AMME3660: Biomanufacturing |
|
| 6 |
Select from
Unit Block: Biomedical Specialist Electives |
|
| 2 |
Select from
ENGG3111: Integrated Engineering 3 |
|
List
|
12 |
Select from
Unit Blocks: Science Intermediate Units Science Senior Units |
Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.
| Type | CP | CP From |
List
|
12 |
Select from
Unit Blocks: Science Intermediate Units Science Senior Units |
| 6 |
Select from
Unit Block: Biomedical Specialist Electives |
|
| 6 |
Select from
Unit Block: Bioelectronics & Biomedical Control Units Note: May be taken in Semester 1 or Semester 2, swapping with Biomedical Specialist Electives. Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802 |
| Type | CP | CP From |
| 2 |
Select from
ENGG4111: Integrated Engineering 4 |
|
| 0 |
Select from
ENGG4000: Practical Experience |
|
| 6 |
Select from
AMME4111: Thesis A Note: Biomedical stream students should be taking replacement unit BMET4111 |
|
| 6 |
Select from
AMME4971: Tissue Engineering Note: Replaced by BMET3971 from 2021 |
|
| 12 |
Select from
Unit Block: Biomedical Specialist Electives Note: Students are required to select a minimum of 18 cp of recommended Biomedical elective units. |
Note: ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.
| Type | CP | CP From |
List
|
6 |
Select from
Unit Blocks: Science Intermediate Units Science Senior Units |
| 6 |
Select from
AMME4112: Thesis B Note: Biomedical stream students should be taking replacement unit BMET4112 |
|
| 6 |
Select from
MECH4961: Biomechanics and Biomaterials Note: Replaced by BMET3961 from 2021 |
Note: This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note: This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note: This information is correct as of 2017. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME2200 | Introductory Thermofluids | 6 |
Semester 2 |
| CHNG2803 | Heat and Mass Transfer | 6 |
Semester 1 |
| ELEC2302 | Signals and Systems | 6 |
Semester 2 |
| MECH2400 | Mechanical Systems Design 1 | 6 |
Semester 1 |
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME5790 | Introduction to Biomechatronics | 6 |
Semester 2 |
| BMET3802 | Biomedical Instrumentation | 6 |
Semester 2 |
| BMET5790 | Introduction to Biomechatronics | 6 |
Semester 2 |
| BMET5995 | Advanced Bionics | 6 |
Semester 1 |
| ELEC3802 | Fundamentals of Biomedical Engineering | 6 |
Semester 1 |
Note: Note from 2021 BMET5790 replaces AMME5790, and BMET3802 replaces ELEC3802
Note:
At least 18 credit points (three units of study) must be selected from the units listed above.
From 2021 BMET3990 replaces AMME4990.
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4010 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
| AMME4111 | Thesis A | 6 |
Semester 1 Semester 2 |
| AMME4112 | Thesis B | 6 |
Semester 1 Semester 2 |
| BMET4010 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
| BMET4111 | Thesis A | 6 |
Semester 1 Semester 2 |
| BMET4112 | Thesis B | 6 |
Semester 1 Semester 2 |
| CHNG4203 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
| CHNG4811 | Thesis A | 6 |
Semester 1 Semester 2 |
| CHNG4812 | Thesis B | 6 |
Semester 1 Semester 2 |
| CIVL4022 | Thesis A | 6 |
Semester 1 Semester 2 |
| CIVL4023 | Thesis B | 6 |
Semester 1 Semester 2 |
| ELEC4712 | Thesis A | 6 |
Semester 1 Semester 2 |
| ELEC4713 | Thesis B | 6 |
Semester 1 Semester 2 |
| ELEC4714 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
| ENGG1111 | Integrated Engineering 1 | 6 |
Semester 1 |
| ENGG2111 | Integrated Engineering 2 | 2 |
Semester 1 Semester 2 Int February |
| ENGG3111 | Integrated Engineering 3 | 2 |
Semester 1 Semester 2 |
| ENGG4000 | Practical Experience | 0 |
Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December |
| ENGG4111 | Integrated Engineering 4 | 2 |
Semester 1 |
| MATH1002 | Linear Algebra | 3 |
Semester 1 Semester 2 Summer Main |
| MATH1005 | Statistical Thinking with Data | 3 |
Semester 1 Semester 2 Int January |
| MATH1021 | Calculus of One Variable | 3 |
Semester 1 Semester 2 |
| MATH1023 | Multivariable Calculus and Modelling | 3 |
Semester 1 Semester 2 |
| MATH1902 | Linear Algebra (Advanced) | 3 |
Semester 1 |
| MATH1905 | Statistics (Advanced) | 3 |
Semester 2 |
| MATH1921 | Calculus of One Variable (Adv) | 3 |
Semester 1 |
| MATH1923 | Multivariable Calculus and Modelling (Adv) | 3 |
Semester 2 |
Note:
Complete a minimum of 36cp including:
- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)
- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)
- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR BMET4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR BMET4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)
Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME1362 | Introduction to Engineering Materials | 6 |
Semester 2 |
| AMME1960 | Biomedical Engineering 1A | 6 |
Semester 1 |
| AMME1961 | Biomedical Engineering 1B | 6 |
Semester 2 |
| AMME2960 | Biomedical Engineering 2 | 6 |
Semester 1 |
| AMME3660 | Biomanufacturing | 6 |
Semester 1 |
| AMME4971 | Tissue Engineering | 6 |
Semester 1 |
| BMET3961 | Biomaterials | 6 |
Semester 2 |
| BMET3971 | Tissue Engineering | 6 |
Semester 1 |
| CHEM1101 | Chemistry 1A | 6 |
Semester 1 Semester 2 Summer Main |
| ELEC1103 | Fundamentals of Electrical and Electronic Engineering | 6 |
Semester 1 |
| ELEC2104 | Electronic Devices and Circuits | 6 |
Semester 2 |
| ENGG1801 | Engineering Computing | 6 |
Semester 1 Int January |
| ENGG1802 | Engineering Mechanics | 6 |
Semester 2 Summer Main Int January |
| MECH2901 | Anatomy and Physiology for Engineers | 6 |
Semester 2 |
| MECH3921 | Biomedical Design and Technology | 6 |
Semester 2 |
| MECH4961 | Biomechanics and Biomaterials | 6 |
Semester 2 |
Note: From 2021 BMET3971 replaces AMME4971, and BMET3961 replaces MECH4961.