|
Faculty of Engineering |
|
|
Faculty of Engineering |
| Course: | Software / Science (2017) |
| CP Required: | 240 |
| Min FT Duration: | 5.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
ENGG1111: Integrated Engineering 1 |
|
| 3 |
Select from
MATH1001: Differential Calculus |
|
| 6 |
Select from
INFO1103: Introduction to Programming Note: This unit is discontinued from 2018. Replacement unit is INFO1113. |
|
| 3 |
Select from
MATH1002: Linear Algebra Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
Note:
A lot of UoS run by the School of Information Technologies are undergoing changes in 2018. If you started your degree prior to 2018 and are affected by these changes, then please consult your program director regarding replacement units to satisfy your degree requirements.
In the BE/BSc program the 18 cp of core subjects, MATH#### may count to both the Science and the Engineering degrees. For all subjects which fall in this category the student must fulfill the credit point requirements of the combined degree by completing additional Software electives and/or Science subjects.
ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
ELEC1601: Introduction to Computer Systems |
|
| 3 |
Select from
MATH1005: Statistical Thinking with Data |
|
| 6 |
Select from
INFO1105: Data Structures Note: This unit is discontinued from 2018. Replacement unit is COMP2123. |
|
| 3 |
Select from
MATH1003: Integral Calculus and Modelling Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
MATH2069: Discrete Mathematics and Graph Theory |
|
| 6 |
Select from
COMP2017: Systems Programming |
|
| 6 |
Select from
ISYS2110: Analysis & Design of Web Information Systems |
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
Unit Block: Science Units |
|
| 2 |
Select from
ENGG2111: Integrated Engineering 2 |
|
| 6 |
Select from
ISYS2120: Data & Information Management |
|
| 6 |
Select from
Unit Block: Science Units |
Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
Unit Block: Software Specialist - Electives |
|
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
COMP3027: Algorithm Design |
Note: At least 6 CP of software specialist electives must be taken (to complete the 108 CP for the software degree), this may be taken in either semester.
| Type | CP | CP From |
| 6 |
Select from
INFO3616: Principles of Security and Security Engineering |
|
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
Unit Block: Science Units |
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
Unit Block: Science Units |
|
| 2 |
Select from
ENGG3111: Integrated Engineering 3 |
|
| 6 |
Select from
INFO3333: Computing 3 Management |
|
| 6 |
Select from
SOFT3202: Software Construction and Design 2 |
Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
INFO3315: Human-Computer Interaction |
|
| 6 |
Select from
ELEC3609: Internet Software Platforms |
|
| 6 |
Select from
SOFT3413: Software Development Project [not offered in 2020] |
| Type | CP | CP From |
| 0 |
Select from
ENGG4000: Practical Experience |
|
| 2 |
Select from
ENGG4111: Integrated Engineering 4 |
|
| 6 |
Select from
ELEC4712: Thesis A |
|
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
ELEC5618: Software Quality Engineering |
|
| 6 |
Select from
COMP5348: Enterprise Scale Software Architecture |
Note:
Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.
ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.
| Type | CP | CP From |
| 6 |
Select from
Unit Block: Science Units |
|
| 6 |
Select from
ELEC5619: Object Oriented Application Frameworks |
|
| 6 |
Select from
ELEC4713: Thesis B |
Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.
| Unit Code | Unit Name | CP | Sessions Offered |
| AERO2711 | Aerospace Engineering Project 1 | 6 |
Semester 1 Semester 2 Int February Int July |
| AERO3711 | Aerospace Engineering Project 2 | 6 |
Semester 1 Semester 2 Int February Int July |
| AERO4711 | Aerospace Engineering Project 3 | 6 |
Semester 1 Semester 2 Int February Int July |
| AMME4010 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
| AMME4111 | Thesis A | 6 |
Semester 1 Semester 2 |
| AMME4112 | Thesis B | 6 |
Semester 1 Semester 2 |
| CHNG4203 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
| CHNG4811 | Thesis A | 6 |
Semester 1 Semester 2 |
| CHNG4812 | Thesis B | 6 |
Semester 1 Semester 2 |
| CIVL4022 | Thesis A | 6 |
Semester 1 Semester 2 |
| CIVL4023 | Thesis B | 6 |
Semester 1 Semester 2 |
| ELEC4712 | Thesis A | 6 |
Semester 1 Semester 2 |
| ELEC4713 | Thesis B | 6 |
Semester 1 Semester 2 |
| ELEC4714 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
| ENGG1061 | Advanced Engineering 1 | 6 |
Semester 1 Semester 2 |
| ENGG1111 | Integrated Engineering 1 | 6 |
Semester 1 |
| ENGG2062 | Engineering Project: Business Plan 2 Adv | 6 |
Semester 2 |
| ENGG2111 | Integrated Engineering 2 | 2 |
Semester 1 Semester 2 Int February |
| ENGG3062 | Technology Education (Advanced) | 6 |
Semester 2 |
| ENGG3111 | Integrated Engineering 3 | 2 |
Semester 1 Semester 2 |
| ENGG4000 | Practical Experience | 0 |
Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December |
| ENGG4064 | Advanced Engineering Design A | 6 |
Semester 2 Int July |
| ENGG4065 | Advanced Engineering Design B | 6 |
Semester 2 |
| ENGG4111 | Integrated Engineering 4 | 2 |
Semester 1 |
| MATH1001 | Differential Calculus | 3 |
Semester 1 Summer Main |
| MATH1002 | Linear Algebra | 3 |
Semester 1 Semester 2 Summer Main |
| MATH1003 | Integral Calculus and Modelling | 3 |
Semester 2 Summer Main |
| MATH1005 | Statistical Thinking with Data | 3 |
Semester 1 Semester 2 Int January |
| MATH1901 | Differential Calculus (Advanced) | 3 |
Semester 1 |
| MATH1902 | Linear Algebra (Advanced) | 3 |
Semester 1 |
| MATH1903 | Integral Calculus and Modelling Advanced | 3 |
Semester 2 |
| MATH1905 | Statistics (Advanced) | 3 |
Semester 2 |
Note:
Complete a minimum of 36cp including:
- ENGG4000 Practical Experience (0cp)
- Exactly 6cp from ENGG1111 Integrated Engineering 1 (6cp) OR ENGG1061 Advanced Engineering 1A (6cp) (see note 1)
- At least 2cp from ENGG2xxx Integrated Engineering 2 (2cp) OR AERO2711 Aerospace Engineering Project 1 (see note 1)
- At least 2cp from ENGG3xxx Integrated Engineering 3 (2cp) OR ENGG3062 Technology Education (Advanced) (6cp) (see note 1) OR AERO3711 Advanced Aerospace Project 2 (see note 1)
- At least 2cp from ENGG4xxx Integrated Engineering 4 (2cp) OR ENGG4064 Advanced Engineering Design A (6cp) (see note 1) OR ENGG4065 Advanced Engineering Design B (6cp) (see note 1) OR AERO4711 Advanced Aerospace Project 3 (see note 1)
- Exactly 12cp of MATH1xxxx units: MATH1001 Differential Calculus (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1003 Integral Calculus AND Modelling (3cp) MATH1005 Statistics (3cp)
- A minimum of 12cp (see note 2) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)
Note 1. The Advanced Engineering units are only available to students who have been accepted into the relevant year of the Advanced Engineering program.
Note 2. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.
Note: Complete all 17 units of study (102 credit points) from this table
Note: Candidates must complete 96 credit points of Science study, including at least one major in a Science subject area. Math and Physics units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/
Note: At least 6cp are required from Software Specialist - Electives block.