Faculty of Engineering

Mechatronic (Space) Engineering (2022)


Note: This course version applies only to students first enrolling in 2022.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Mechatronic (Space) Engineering (2022)
CP Required: 192
Min FT Duration: 4.00 Years
Min PT Duration: 4.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 6 credit points of Introductory Computing units table

► 12 credit points of Foundation Mathematics units table

► 30 credit points of Project table

► The Professional Engagement Program (PEP) units comprising ENGP1001 (0cp), ENGP1002 (0cp), ENGP1003 (0cp), ENGP2001 (0cp), ENGP2002 (0cp), ENGP2003 (0cp), ENGP3001 (0cp) and ENGP3002 (0cp)

► 120 credit points of Mechatronic (Space) Stream core units

► 6 credit points of Mechatronic Stream electives

► Up to 6 credit points of Mechatronic Stream Machine Learning elective units

► 6 credit points of Space elective units

► 6 credit points of Free Electives (Engineering Electives, or a Table S elective)

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Dalyell Scholars Program

Unit substitutions may be available for students enrolled in the Dalyell Scholars Program, depending on their year of commencement and degree. Dalyell Scholars can view the Canvas page for further information specific to their circumstances: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
3 Select from MATH1021: Calculus of One Variable
3 Select from MATH1002: Linear Algebra
0 Select from ENGP1001: Professional Engagement Program 1A


Note: All students must enrol in ENGP1001 in their first semester of enrolment.
6 Select from MTRX1701: Introduction to Mechatronic Engineering
6 Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering
6 Select from ENGG1810: Introduction to Engineering Computing

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type CP CP From
3 Select from MATH1005: Statistical Thinking with Data
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from AMME1802: Engineering Mechanics
6 Select from MTRX1702: Mechatronics 1
6 Select from MTRX1705: Introduction to Mechatronic Design
0 Select from ENGP1002: Professional Engagement Program 1B


Note: You must achieve a pass result in the previous ENGPXXXX unit before you can enrol in the next one. This means you cannot add Semester 2 units to your enrolment until after Semester 1 results are released.

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

Type CP CP From
6 Select from AMME2500: Engineering Dynamics
0 Select from ENGP1003: Professional Engagement Program 1C
6 Select from AMME2000: Engineering Analysis
MATH2021: Vector Calculus and Differential Equations
6 Select from MTRX2700: Mechatronics 2
6 Select from Unit Block:
Free Electives
or other units.

Year 2 - Semester 2

Type CP CP From
6 Select from AMME2301: Mechanics of Solids
6 Select from AMME2200: Introductory Thermofluids
6 Select from ELEC2104: Electronic Devices and Circuits
6 Select from AERO2705: Space Engineering 1
0 Select from ENGP2001: Professional Engagement Program 2A


Note: You must achieve a pass result in the previous ENGPXXXX unit before you can enrol in the next one. This means you cannot add Semester 2 units to your enrolment until after Semester 1 results are released.

Year 3 - Semester 1

Type CP CP From
6 Select from AMME3500: System Dynamics and Control
0 Select from ENGP2002: Professional Engagement Program 2B
6 Select from MECH3660: Manufacturing Engineering
6 Select from ELEC3404: Electronic Circuit Design
6 Select from MECH2400: Mechanical Systems Design 1

Year 3 - Semester 2

Type CP CP From
6 Select from MTRX3700: Mechatronics 3
6 Select from MTRX3760: Mechatronic Systems Design
6 Select from AERO3760: Space Engineering 2
0 Select from ENGP2003: Professional Engagement Program 2C


Note: You must achieve a pass result in the previous ENGPXXXX unit before you can enrol in the next one. This means you cannot add Semester 2 units to your enrolment until after Semester 1 results are released.
6 Select from ENGG2112: Multi-disciplinary Engineering

Year 4 - Semester 1

Type CP CP From
6 Select from AMME4111: Thesis A
0 Select from ENGP3001: Professional Engagement Program 3A
6 Select from ELEC3204: Power Electronics and Applications
6 Select from AERO4701: Space Engineering 3
List
6 Select from Unit Blocks:
Mechatronic Stream Electives
Mechatronic Stream Machine Learning Elective Units

Year 4 - Semester 2

Type CP CP From
6 Select from AMME4112: Thesis B
6 Select from Unit Block:
Mechatronic Stream Electives
6 Select from Unit Block:
Space Elective Units
6 Select from ENGG3112: Interdisciplinary Engineering
0 Select from ENGP3002: Professional Engagement Program 3B


Note: You must achieve a pass result in the previous ENGPXXXX unit before you can enrol in the next one. This means you cannot add Semester 2 units to your enrolment until after Semester 1 results are released.

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 0 - Introductory Computing Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
ENGG1810 Introduction to Engineering Computing 6 Semester 1
Semester 2
Int February
INFO1110 Introduction to Programming 6 Semester 1
Semester 2
INFO1910 Introduction to Programming (Advanced) 6 Semester 1
Semester 2

Note: Students must complete:

-6cp from ENGG1810 or (INFO1110 or INFO1910). For Mechatronic (Space) stream students it is recommended that ENGG1810 is taken.

Block 1 - Foundation Mathematics Units (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 12cp including:

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

Block 2 - Projects Table (Min CP: 30,Max CP: 30)

Unit Code Unit Name CP Sessions Offered
AERO1560 Introduction to Aerospace Engineering 6 Semester 1
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
BMET1960 Biomedical Engineering 1A 6 Semester 1
CHNG1108 Introduction to Chemical Engineering 6 Semester 1
CIVL1900 Introduction to Civil Engineering 6 Semester 1
ELEC1004 Practical Introduction to Electrical Engineering 6 Semester 1
ENGG2112 Multi-disciplinary Engineering 6 Semester 1
Semester 2
ENGG3112 Interdisciplinary Engineering 6 Semester 1
Semester 2
MECH1560 Introduction to Mechanical Engineering 6 Semester 1
MTRX1701 Introduction to Mechatronic Engineering 6 Semester 1

Note: - Students are to select the introduction unit relevant to their stream. Students in both Electrical and Software Engineering streams are to take ELEC1004.

- Students enrolled in the Dalyell Stream may count any Dalyell unit in place of ENGG2112 and may count any Engineering Dalyell unit in place of ENGG3112

- Students are to select the thesis units relevant to their stream. Aeronautical, Mechanical and Mechatronic students are to enrol in the AMME coded units. Students in both Electrical and Software are to enrol in the ELEC coded units.

Block 3 - Professional Engagement Program (PEP) Units

Unit Code Unit Name CP Sessions Offered
ENGP1001 Professional Engagement Program 1A 0 Semester 1
Semester 2
ENGP1002 Professional Engagement Program 1B 0 Semester 1
Semester 2
ENGP1003 Professional Engagement Program 1C 0 Semester 1
Semester 2
ENGP2001 Professional Engagement Program 2A 0 Semester 1
Semester 2
ENGP2002 Professional Engagement Program 2B 0 Semester 1
Semester 2
ENGP2003 Professional Engagement Program 2C 0 Semester 1
Semester 2
ENGP3001 Professional Engagement Program 3A 0 Semester 1
Semester 2
ENGP3002 Professional Engagement Program 3B 0 Semester 1
Semester 2

Note: -Candidates for the Bachelor of Engineering Honours must complete the Professional Engagement Program units of study.

- Candidates must enrol in ENGP1001 in their first semester of study

Block 4 - Mechatronic (Space) Stream Core (Min CP: 120,Max CP: 120)

Unit Code Unit Name CP Sessions Offered
AERO2705 Space Engineering 1 6 Semester 2
AERO3760 Space Engineering 2 6 Semester 2
AERO4701 Space Engineering 3 6 Semester 1
AMME1802 Engineering Mechanics 6 Semester 2
AMME2000 Engineering Analysis 6 Semester 1
AMME2200 Introductory Thermofluids 6 Semester 2
AMME2301 Mechanics of Solids 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1
ELEC1103 Fundamentals of Electrical and Electronic Engineering 6 Semester 1
ELEC2104 Electronic Devices and Circuits 6 Semester 2
ELEC3204 Power Electronics and Applications 6 Semester 1
ELEC3404 Electronic Circuit Design 6 Semester 1
MATH2021 Vector Calculus and Differential Equations 6 Semester 1
MECH2400 Mechanical Systems Design 1 6 Semester 1
MECH3660 Manufacturing Engineering 6 Semester 1
MTRX1702 Mechatronics 1 6 Semester 2
MTRX1705 Introduction to Mechatronic Design 6 Semester 2
MTRX2700 Mechatronics 2 6 Semester 1
MTRX3700 Mechatronics 3 6 Semester 2
MTRX3760 Mechatronic Systems Design 6 Semester 2

Block 5 - Mechatronic Stream Electives (Min CP: 6,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
AMME4710 Computer Vision and Image Processing 6 Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
BMET5790 Introduction to Biomechatronics 6 Semester 2
MECH5720 Sensors and Signals 6 Semester 2
MTRX5700 Experimental Robotics 6 Semester 1

Note: In 2025, AMME4710 was re-coded to AMME5710.

Block 6 - Mechatronic Stream Machine Learning Elective Units (Max CP: 6)

Unit Code Unit Name CP Sessions Offered
COMP3308 Introduction to Artificial Intelligence 6 Semester 1
COMP5318 Machine Learning and Data Mining 6 Semester 1
Semester 2

Block 7 - Space Elective Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AERO5700 Space Engineering (Advanced) 6 Semester 1
Semester 2
AMME3060 Engineering Methods 6 Semester 2
AMME4710 Computer Vision and Image Processing 6 Semester 2
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5292 Applied Fluid Dynamics and Turbulence 6 Semester 1
AMME5510 Vibration and Acoustics 6 Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5902 Computer Aided Manufacturing 6 Semester 2
AMME5912 Crash Analysis and Design 6 Semester 1
BMET5790 Introduction to Biomechatronics 6 Semester 2
MECH5311 Microscopy and Microanalysis of Materials 6 Semester 1
MECH5720 Sensors and Signals 6 Semester 2
MTRX5700 Experimental Robotics 6 Semester 1

Block 8 - Free Electives (Max CP: 6)

Note: Students may take 6 credit points of free electives to complete the total number of credit points for their degree. Students may take the following units of study as free electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculty of Engineering available to undergraduate students

(2) Any unit of study from Table S available to undergraduate students