Faculty of Engineering

Mechatronic (Space) / Science (2025)


Note: This course version applies only to students first enrolling in 2025.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Mechatronic (Space) / Science (2025)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: 5.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (168 credit points):

► 6 credit points of Introductory Computing units table

► 12 credit points of Foundations Mathematics units table

► 30 credit points of Project table

► The Professional Engagement Program comprising ENGP1001 (0cp), ENGP1002 (0cp), ENGP1003 (0cp), ENGP2001 (0cp), ENGP2002 (0cp), ENGP2003 (0cp), ENGP3001 (0cp) and ENGP3002 (0cp)

► 114 credit points of Mechatronics (Space) stream core units

► 6 credit points of electives from either:

■ Mechatronic stream electives, OR

■ Machine Learning electives, OR

■ Space electives.

Science (ˆ84 credit points)

► *12 credit points of Science degree core units (12 cp of MATH1XXX in Engineering Core meets this requirement and is counted toward both the BEHons and BSc total)

► *48 credit points of Table A major

► 6 credit points of OLE units

► 18 credit points of electives from Science Table A or Table S

* The Science degree core units comprise 12 cp of MATH1XXX units and 12cp of 1000-level units from Table A. The 1000-level units from the Table A major count towards Science degree core requirement. If you are taking a Mathematics major, you must complete 12 cp of other 1000-level Science Table A units.

ˆ With Math units taken as part of the Engineering component, students take 72 cp of Science units in total.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their school before enrolling.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
6 Select from MTRX1701: Introduction to Mechatronic Engineering
6 Select from Unit Block:
Science Units
0 Select from ENGP1001: Professional Engagement Program 1A


Note: All students must enrol in ENGP1001 in their first semester of enrolment.
6 Select from ENGG1810: Introduction to Engineering Computing
6 Select from MATH1061: Mathematics 1A

Note: MATH1061 may be replaced by advanced unit MATH1961, subject to prerequisite conditions being met.

Year 1 - Semester 2

Type CP CP From
6 Select from AMME1802: Engineering Mechanics
0 Select from ENGP1002: Professional Engagement Program 1B
6 Select from Unit Block:
Science Units
6 Select from MTRX1702: Mechatronics 1
6 Select from MATH1062: Mathematics 1B

Note: MATH1062 may be replaced by advanced unit MATH1962.

Year 2 - Semester 1

Type CP CP From
0 Select from ENGP1003: Professional Engagement Program 1C
6 Select from AMME2000: Engineering Analysis
6 Select from AMME1705: Introduction to Electromechanical Systems
6 Select from AMME2500: Engineering Dynamics
6 Select from MECH2400: Mechanical Systems Design 1

Year 2 - Semester 2

Type CP CP From
6 Select from Unit Block:
Science Units
0 Select from ENGP2001: Professional Engagement Program 2A
6 Select from AMME2301: Mechanics of Solids
6 Select from MTRX1705: Introduction to Mechatronic Design
6 Select from MECH2460: Manufacturing Engineering

Year 3 - Semester 1

Type CP CP From
0 Select from ENGP2002: Professional Engagement Program 2B
6 Select from MTRX2700: Mechatronics 2
6 Select from ENGG2112: Multi-disciplinary Engineering
12 Select from Unit Block:
Science Units

Year 3 - Semester 2

Type CP CP From
0 Select from ENGP2003: Professional Engagement Program 2C
6 Select from ELEC2104: Electronic Devices and Circuits
6 Select from AERO2705: Space Engineering 1
6 Select from AMME2200: Introductory Thermofluids
6 Select from Unit Block:
Science Units

Year 4 - Semester 1

Type CP CP From
6 Select from AMME3500: System Dynamics and Control
6 Select from ENGG3112: Interdisciplinary Engineering
0 Select from ENGP3001: Professional Engagement Program 3A
6 Select from ELEC3204: Power Electronics and Applications
6 Select from Unit Block:
Science Units

Year 4 - Semester 2

Type CP CP From
6 Select from MTRX3760: Mechatronic Systems Design
0 Select from ENGP3002: Professional Engagement Program 3B
6 Select from MTRX3700: Mechatronics 3
6 Select from AERO3760: Space Engineering 2
6 Select from Unit Block:
Science Units

Year 5 - Semester 1

Type CP CP From
6 Select from AMME4111: Thesis A
6 Select from AERO4701: Space Engineering 3
12 Select from Unit Block:
Science Units

Year 5 - Semester 2

Type CP CP From
6 Select from AMME4112: Thesis B
List
6 Select from Unit Blocks:
Mechatronic (Space) Stream Elective Units
Mechatronic Stream Elective Units
Mechatronic Stream Machine Learning Electives
Science Units


Note: Students are permitted to take a maximum of 6 credit points of electives
12 Select from Unit Block:
Science Units

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 0 - Introductory Computing Units (Min CP: 6,Max CP: 6)

Unit Code Unit Name CP Sessions Offered
ENGG1810 Introduction to Engineering Computing 6 Semester 1
Semester 2
Int February
INFO1110 Introduction to Programming 6 Semester 1
Semester 2
INFO1910 Introduction to Programming (Advanced) 6 Semester 1
Semester 2

Note: Students must complete:

-6cp from ENGG1810 or (INFO1110 or INFO1910). For Mechatronic (Space) stream students it is recommended that ENGG1810 is taken.

Block 1 - Foundation Mathematics Units (Min CP: 12,Max CP: 12)

Unit Code Unit Name CP Sessions Offered
MATH1061 Mathematics 1A 6 Semester 1
Semester 2
MATH1062 Mathematics 1B 6 Semester 1
Semester 2
MATH1961 Mathematics 1A (Advanced) 6 Semester 1
MATH1962 Mathematics 1B (Advanced) 6 Semester 2

Block 2 - Projects Table (Min CP: 30,Max CP: 30)

Unit Code Unit Name CP Sessions Offered
AERO1560 Introduction to Aerospace Engineering 6 Semester 1
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
BMET1960 Biomedical Engineering 1A 6 Semester 1
CHNG1108 Introduction to Chemical Engineering 6 Semester 1
CIVL1900 Introduction to Civil Engineering 6 Semester 1
ELEC1004 Practical Introduction to Electrical Engineering 6 Semester 1
ELEC1005 Introduction to Software Engineering 6 Semester 1
ENGG1800 Introduction to Engineering A 6 Semester 1
ENGG2112 Multi-disciplinary Engineering 6 Semester 1
Semester 2
ENGG3112 Interdisciplinary Engineering 6 Semester 1
Semester 2
MECH1560 Introduction to Mechanical Engineering 6 Semester 1
MTRX1701 Introduction to Mechatronic Engineering 6 Semester 1

Note: - Students are to select the introduction unit relevant to their stream.

- Students are to select the thesis units relevant to their stream. Aeronautical, Mechanical and Mechatronic students are to enrol in the AMME coded units. Students in both Electrical and Software are to enrol in the ELEC coded units.

Block 3 - Professional Engagement Program (PEP) Units

Unit Code Unit Name CP Sessions Offered
ENGP1001 Professional Engagement Program 1A 0 Semester 1
Semester 2
ENGP1002 Professional Engagement Program 1B 0 Semester 1
Semester 2
ENGP1003 Professional Engagement Program 1C 0 Semester 1
Semester 2
ENGP2001 Professional Engagement Program 2A 0 Semester 1
Semester 2
ENGP2002 Professional Engagement Program 2B 0 Semester 1
Semester 2
ENGP2003 Professional Engagement Program 2C 0 Semester 1
Semester 2
ENGP3001 Professional Engagement Program 3A 0 Semester 1
Semester 2
ENGP3002 Professional Engagement Program 3B 0 Semester 1
Semester 2

Note: -Candidates for the Bachelor of Engineering Honours must complete the Professional Engagement Program units of study.

- Candidates must enrol in ENGP1001 in their first semester of study

Block 4 - Mechatronic (Space) Stream Core Units (Min CP: 114,Max CP: 114)

Unit Code Unit Name CP Sessions Offered
AERO2705 Space Engineering 1 6 Semester 2
AERO3760 Space Engineering 2 6 Semester 2
AERO4701 Space Engineering 3 6 Semester 1
AMME1705 Introduction to Electromechanical Systems 6 Semester 1
AMME1802 Engineering Mechanics 6 Semester 2
AMME2000 Engineering Analysis 6 Semester 1
AMME2200 Introductory Thermofluids 6 Semester 2
AMME2301 Mechanics of Solids 6 Semester 2
AMME2500 Engineering Dynamics 6 Semester 1
AMME3500 System Dynamics and Control 6 Semester 1
ELEC2104 Electronic Devices and Circuits 6 Semester 2
ELEC3204 Power Electronics and Applications 6 Semester 1
MECH2400 Mechanical Systems Design 1 6 Semester 1
MECH2460 Manufacturing Engineering 6 Semester 2
MTRX1702 Mechatronics 1 6 Semester 2
MTRX1705 Introduction to Mechatronic Design 6 Semester 2
MTRX2700 Mechatronics 2 6 Semester 1
MTRX3700 Mechatronics 3 6 Semester 2
MTRX3760 Mechatronic Systems Design 6 Semester 2

Block 5 - Mechatronic (Space) Stream Elective Units (Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AERO5700 Space Engineering (Advanced) 6 Semester 1
Semester 2
AMME3060 Engineering Methods 6 Semester 2
AMME5202 Computational Fluid Dynamics 6 Semester 1
AMME5292 Applied Fluid Dynamics and Turbulence 6 Semester 1
AMME5510 Vibration and Acoustics 6 Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5710 Computer Vision and Image Processing 6 Semester 2
AMME5902 Computer Aided Manufacturing 6 Semester 2
AMME5912 Crash Analysis and Design 6 Semester 1
MECH5311 Microscopy and Microanalysis of Materials 6 Semester 1

Note: Students are permitted to take a maximum of 6 credit points of electives from Mechatronic stream elective units, Mechatronic (Space) stream elective units, or Mechatronic stream Machine Learning elective units

Block 6 - Mechatronic Stream Elective Units (Max CP: 6)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME5520 Advanced Control and Optimisation 6 Semester 1
AMME5710 Computer Vision and Image Processing 6 Semester 2
BMET5790 Introduction to Biomechatronics 6 Semester 2
MECH5720 Sensors and Signals 6 Semester 2
MTRX5700 Experimental Robotics 6 Semester 1

Note: Students are permitted to take a maximum of 6 credit points of electives from Mechatronic stream elective units, Mechatronic (Space) stream elective units, or Mechatronic stream Machine Learning elective units

Block 7 - Mechatronic Stream Machine Learning Electives (Max CP: 6)

Unit Code Unit Name CP Sessions Offered
COMP3308 Introduction to Artificial Intelligence 6 Semester 1
COMP4318 Machine Learning and Data Mining 6 Semester 1
Semester 2

Note: Students are permitted to take a maximum of 6 credit points of electives from Mechatronic stream elective units, Mechatronic (Space) stream elective units, or Mechatronic stream Machine Learning elective units

Block 10 - Science Units (Min CP: 72,Max CP: 72)

Note: Candidates must complete 84 credit points of Science study, including at least one major in a Science subject area and 6 credit points of OLEs. (Math units taken as part of the Engineering component meet the requirement of 12 cp of Science core, therefore students complete 72 cp Science total.)

See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/