|
University Archive |
|
|
University Archive |
| Course: | Biomedical Engineering / Science (2014) |
| CP Required: | 240 |
| Min FT Duration: | 5.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | University Archive |
| Years Offered: | 2014, 2013 |
| Type | CP | CP From |
Core
|
6 |
CHEM1101: Chemistry 1A |
Core
|
6 |
ENGG1960: Introduction to Biomedical Engineering |
Core
|
3 |
MATH1001: Differential Calculus Note: Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
Core
|
3 |
MATH1002: Linear Algebra |
| 6 |
Select from
Unit Block: Science Junior Units Note: Science/Engineering combined degrees require 240 credit points, comprising 96 credit points from Science subject areas, with a major in one Science discipline, plus units prescribed for the Engineering specialisation. Science units forming part of core requirements in the Biomedical Engineering specialisation may be counted as part of the 96 credit point Science requirement. Consult resolutions for Combined Engineering /Science degree in Faculty handbooks for further details. |
| Type | CP | CP From |
Core
|
6 |
CHEM1102: Chemistry 1B |
Core
|
3 |
MATH1003: Integral Calculus and Modelling Note: Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
Core
|
3 |
MATH1005: Statistical Thinking with Data |
Core
|
6 |
MBLG1001: Molecular Biology and Genetics (Intro) |
| 6 |
Select from
Unit Block: Science Junior Units |
| Type | CP | CP From |
Core
|
6 |
ELEC1103: Fundamentals of Electrical and Electronic Engineering |
Core
|
6 |
ENGG1801: Engineering Computing Note: Students wishing to major in Computer Science can replace this unit with INFO1103. |
Core
|
6 |
MATH2067: DEs and Vector Calculus for Engineers |
List
|
6 |
Select from
Unit Blocks: Science Junior Units Science Intermediate Units |
| Type | CP | CP From |
Core
|
6 |
AMME1362: Introduction to Engineering Materials |
Core
|
6 |
MECH2901: Anatomy and Physiology for Engineers |
| 6 |
Select from
Unit Block: Engineering Systems Units Note: May be taken as a Semester 1 unit. |
|
List
|
6 |
Select from
Unit Blocks: Science Junior Units Science Intermediate Units |
| Type | CP | CP From |
Core
|
6 |
MECH3660: Manufacturing Engineering |
List
|
18 |
Select from
Unit Blocks: Science Junior Units Science Intermediate Units Science Senior Units |
Note: Sufficient Science Units of Study at Intermediate and Senior levels must be spread over 3rd and 4th year to meet the 96cp requirement of the Science component of this degree. Students must also ensure they meet the requirements for a Science Major, which is typically 24cp of Senior Science units (consult the Science Handbook). Note, Science units in the common core of 1st year (30cp) and 2nd year (6cp) contribute 36cp of Science units. Therefore, a minimum of an additional 60cp (10 units) must be completed in order to meet the 96cp of Science requirement. In addition, the 1st and 2nd year Science course structure contributes another 24cp of Science units. As a result, 24cp of Science units are generally undertaken in 3rd/4th year. These Science unit requirements can be met with EITHER Biomedical Engineering Selected Core Units OR additional Science units at the Senior (3XXX) level.
| Type | CP | CP From |
Core
|
6 |
ELEC2104: Electronic Devices and Circuits |
Core
|
6 |
MECH3921: Biomedical Design and Technology |
List
|
6 |
Select from
Unit Blocks: Science Junior Units Science Intermediate Units Science Senior Units |
| 6 |
Select from
Unit Block: Bioelectronics & Biomedical Control Units Note: May be taken as Semester 1 unit. |
| Type | CP | CP From |
| 12 |
Select from
Unit Block: Recommended Biomedical Electives |
|
List
|
12 |
Select from
Unit Blocks: Science Intermediate Units Science Senior Units |
| Type | CP | CP From |
| 12 |
Select from
Unit Block: Recommended Biomedical Electives |
|
| 12 |
Select from
Unit Block: Science Senior Units |
| Type | CP | CP From |
Core
|
6 |
AMME4111: Thesis A Note: Under the change of rules in 2015 and for AQF and accreditation compliance, students should enrol in AMME4111 /AMME4112 |
Core
|
0 |
ENGG4000: Practical Experience |
| 6 |
Select from
Unit Block: Applied Biomedical Computing Units Note: May also be taken in Semester 2. |
|
| 12 |
Select from
Unit Block: Recommended Biomedical Electives Note: The degree requires 18 credit points of these units including at least one of the following four units: AMME4990, AMME4992, CHNG5605 or ELEC5701. |
| Type | CP | CP From |
Core
|
6 |
AMME4112: Thesis B Note: Under the change of rules in 2015 and for AQF and accreditation compliance, students should enrol in AMME4111 /AMME4112 |
Core
|
6 |
AMME4971: Tissue Engineering |
Core
|
6 |
MECH4961: Biomechanics and Biomaterials |
| 6 |
Select from
Unit Block: Recommended Biomedical Electives |
| Type | CP | CP From |
Core
|
6 |
AMME4111: Thesis A |
Core
|
6 |
AMME4112: Thesis B |
Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace 4th Year Engineering Project units AMME4121 and AMME4122 with Honours Thesis Units AMME4111 and AMME4112.
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME2261 | Fluid Mechanics 1 | 6 |
Semester 1 |
| AMME2262 | Introduction to Thermal Engineering | 6 |
Semester 2 |
| CHNG2803 | Heat and Mass Transfer | 6 |
Semester 1 |
| ELEC2302 | Signals and Systems | 6 |
Semester 2 |
| MECH2400 | Mechanical Systems Design 1 | 6 |
Semester 1 |
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4790 | Introduction to Biomechatronics | 6 |
Semester 2 |
| ELEC3802 | Fundamentals of Biomedical Engineering | 6 |
Semester 1 |
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4981 | Applied Biomedical Engineering | 6 |
Semester 1 |
| COMP5424 | Information Technology in Biomedicine | 6 |
Semester 1 |
| COMP5456 | Introduction to Bioinformatics [not running] | 6 |
Semester 2 |
Note: MECH4902 has been replaced by MECH5907 from 2017. At least 18 credit points (three units of study) must be selected from the units listed above including at least one of the following: AMME4990, AMME4992, CHNG5605 or ELEC5701.