Note: This course version is currently under review and is subject to change.
ProgramsEngENGI (UG)BEHons CombinedBE/BComBE/BCom to 2022Mechatronic / Commerce (2019)
Show information forcommencing students (ie. started First Year then).
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 3 | MATH1021: Calculus of One Variable | |
| 6 | BUSS1000: Future of Business Note: You must complete BUSS1000 in your first semester of enrolment. | |
| 6 | ENGG1801: Engineering Computing | |
| 6 | MTRX1701: Introduction to Mechatronic Engineering | |
| 3 | MATH1002: Linear Algebra | |
| 0 | ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024
Year 1 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | MTRX1705: Introduction to Mechatronic Design | |
| 6 | AMME1362: Introduction to Engineering Materials | |
| 3 | MATH1023: Multivariable Calculus and Modelling | |
| 6 | ENGG1802: Engineering Mechanics | |
| 3 | MATH1004: Discrete Mathematics Note: Students in BE(Hons)/BCom take BUSS1020 in place of BE(Hons) core unit MATH1005. In the spare 3 cp slot, students are advised to take MATH1004. |
Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024
Year 2 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | BUSS2000: Leading and Influencing in Business | |
| 6 | ELEC1103: Fundamentals of Electrical and Electronic Engineering | |
| 6 | AMME2500: Engineering Dynamics | |
| 6 | BUSS1020: Quantitative Business Analysis |
Year 2 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | MTRX1702: Mechatronics 1 | |
| 6 | ELEC2104: Electronic Devices and Circuits | |
| 12 | Select from BUSS1030: Accounting, Business and Society | |
| 0 | ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Year 3 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 12 | Select from Commerce Units | |
| 6 | MTRX2700: Mechatronics 2 | |
| 6 | ELEC3204: Power Electronics and Applications |
Year 3 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 12 | Select from Commerce Units | |
| 6 | AMME2301: Mechanics of Solids | |
| 6 | MECH2400: Mechanical Systems Design 1 Note: From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor. |
Year 4 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 12 | Select from Commerce Units | |
| 6 | AMME3500: System Dynamics and Control | |
| 6 | MECH3660: Manufacturing Engineering |
Year 4 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Commerce Units | |
| 6 | MECH3460: Mechanical Systems Design 2 | |
| 6 | MTRX3700: Mechatronics 3 | |
| 6 | MTRX3760: Mechatronic Systems Design |
Year 5 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 12 | Select from Commerce Units | |
| 6 | AMME4111: Thesis A | |
| 6 | Mechatronic Specialist Electives Note: At least 12 credit points of Mechatronics Elective units must be completed. These may be taken in either semester. | |
| 0 | ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Year 5 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 12 | Select from Commerce Units | |
| 6 | AMME4112: Thesis B | |
| 6 | Mechatronic Specialist Electives Note: At least 12 credit points of Mechatronics Elective units must be completed. These may be taken in either semester. |
Additional Requirements for Major
| Type | CP | CP From |
| 6 | Select from MTRX1701: Introduction to Mechatronic Engineering | |
| 18 | Select from AERO2705: Space Engineering 1 AERO3760: Space Engineering 2 AERO4701: Space Engineering 3 | |
| 12 | Select from AMME4111: Thesis A AMME4112: Thesis B | |
| 12 | Select from Space Specialist Electives |
To be eligible for this major, students are required to meet progression requirements. There are minimum ATAR or WAM (>75%) entry requirements for enrolment in this major.
This Engineering major can be taken along with any of the listed Commerce majors.
Students undertaking this major are not required to do Integrated Engineering units (ENGG1111, ENGG2111, ENGG3111, ENGG4111), and are exempt from AMME1362 and MECH3460
Major in Space Engineering
| Type | CP | CP From |
| 6 |
Select from
MTRX1701: Introduction to Mechatronic Engineering |
|
| 18 |
Select from
AERO2705: Space Engineering 1 AERO3760: Space Engineering 2 AERO4701: Space Engineering 3 |
|
| 12 |
Select from
AMME4111: Thesis A AMME4112: Thesis B |
|
| 12 |
Select from
Unit Block Space Specialist Electives |
|
| View complete Program Structure | ||
Note:
To be eligible for this major, students are required to meet progression requirements. There are minimum ATAR or WAM (>75%) entry requirements for enrolment in this major.
This Engineering major can be taken along with any of the listed Commerce majors.
Students undertaking this major are not required to do Integrated Engineering units (ENGG1111, ENGG2111, ENGG3111, ENGG4111), and are exempt from AMME1362 and MECH3460
Block 1 - Engineering Core (Min CP: 24,Max CP: 24)
Note:
Complete a minimum of 36cp including:
- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)
- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)
- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)
Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.
Block 2 - Mechatronic Stream Core (Min CP: 108,Max CP: 108)
Block 3 - Mechatronic Specialist Electives (Min CP: 12,Max CP: 12)
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2 |
| AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1 |
| AMME5790 | Introduction to Biomechatronics | 6 |
Semester 2 |
| MECH5720 | Sensors and Signals | 6 |
Semester 2 |
| MTRX5700 | Experimental Robotics | 6 |
Semester 1 |
Block 4 - Commerce Core (Min CP: 24,Max CP: 24)
| Unit Code | Unit Name | CP | Sessions Offered |
| BUSS1000 | Future of Business | 6 |
Semester 1 Semester 2 |
| BUSS1020 | Quantitative Business Analysis | 6 |
Semester 1 Semester 2 |
| BUSS1030 | Accounting, Business and Society | 6 |
Semester 1 Semester 2 |
| BUSS2000 | Leading and Influencing in Business | 6 |
Semester 1 Semester 2 |
Note: You must complete BUSS1000 in your first semester of enrolment.
Block 5 - Commerce Units (Max CP: 72)
Note: For the Bachelor of Commerce component, students are required to complete a total of 96 credit points of Commerce Table A units as listed in the handbook of the Business School, including 24 credit points of core units, a major or program from Table A and 12 credit points of OLEs. See Faculty handbooks at http://sydney.edu.au/handbooks
Block 6 - Space Specialist Electives (Min CP: 6,Max CP: 6)
Block 7 - Space Major Core (Max CP: 18)
| Unit Code | Unit Name | CP | Sessions Offered |
| AERO2705 | Space Engineering 1 | 6 |
Semester 2 |
| AERO3760 | Space Engineering 2 | 6 |
Semester 2 |
| AERO4701 | Space Engineering 3 | 6 |
Semester 1 |
Note: These units are only available to students enrolled in the Space major. ATAR/WAM requirements apply.
Block 8 - Machine Learning Elective units (Max CP: 6)
| Unit Code | Unit Name | CP | Sessions Offered |
| COMP3308 | Introduction to Artificial Intelligence | 6 |
Semester 1 |
| COMP5318 | Machine Learning and Data Mining | 6 |
Semester 1 Semester 2 |
Note: Students may complete 6 credit points of Machine Learning Elective in place of a Specialist Elective unit.
| Course: | Mechatronic / Commerce (2019) |
| CP Required: | 240 |
| Min FT Duration: | 5.00 Years |
| Min PT Duration: | 5.00 Years |
| Faculty/School: | School of Aerospace, Mechanical & Mechatronic Engineering |
| Years Offered: | 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
| Requirements: | Summary In summary the requirements are: Students must complete 240 credit points as follows: Engineering (144 credit points): ► 24 credit points of Engineering core units ► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp) ► 108 credit points of Mechatronic stream core units ► 12 credit points of Mechatronic Specialist electives units Commerce (96 credit points): ► 24 credit points of Commerce core units ► A major (48 credit points) from Table A of the Faculty of Commerce ► 12 credit points of OLE ► 12 credit points of elective units from Table A or Table S The handbook rules governing this degree are as follows: (a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified. (b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree. To qualify for the award of the combined degree: Requirements for the Bachelor of Engineering Honours (a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree; (b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising: (i) 36 credit points from the Engineering Core Table, including all required units; (ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units; (c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream. Requirements for the Bachelor of Commerce For the Bachelor of Commerce component of a combined degree: (a) The units of study that may be taken are set out in Table A of The University of Sydney Business School. (b) Candidates must complete 96 credit points of units of study selected from the Table of Undergraduate Units of Study from The University of Sydney Business School including: (i) any required degree core units as set out in Table A of the University of Sydney Business School; and (ii) a major (48 credit points) or a 3-year program with an embedded major (except for the Professional Accounting Program) from Table A of the University of Sydney Business School; and (iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and (iv) where appropriate, additional electives from Table A of the University of Sydney Business School or Table S; (v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the University of Sydney Business School. Dalyell Scholars Program Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars Advanced units in Maths and Science Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling. Study Abroad Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units. Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study. Faculty Resolutions Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/ |
