Note: This course version is currently under review and is subject to change.
ProgramsEngENGI (UG)BEHonsS2 EntryMechatronic Engineering (mid-year) (2017)
Show information forcommencing students (ie. started First Year then).
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 3 | MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023. | |
| 6 | ENGG1111: Integrated Engineering 1 | |
| 6 | MTRX1702: Mechatronics 1 | |
| 6 | ENGG1802: Engineering Mechanics | |
| 3 | MATH1005: Statistical Thinking with Data |
Note: ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.
Year 2 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | MTRX1705: Introduction to Mechatronic Design Note: From 2018, MTRX1705 will be offered in Semester 2 | |
| 3 | MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021. | |
| 6 | ENGG1801: Engineering Computing | |
| 6 | MTRX1701: Introduction to Mechatronic Engineering | |
| 3 | MATH1002: Linear Algebra |
Note: ENGG1801 may be replaced by INFO1103/INFO1110. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.
Year 2 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 2 | ENGG2111: Integrated Engineering 2 | |
| 6 | AMME1362: Introduction to Engineering Materials | |
| 6 | AMME2301: Mechanics of Solids | |
| 6 | MECH2400: Mechanical Systems Design 1 | |
| 6 | ELEC2104: Electronic Devices and Circuits |
Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.
Year 3 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Select from AMME2000: Engineering Analysis MATH2021: Vector Calculus and Differential Equations or other units. | |
| 6 | ELEC1103: Fundamentals of Electrical and Electronic Engineering | |
| 6 | AMME2500: Engineering Dynamics | |
| 6 | MTRX2700: Mechatronics 2 |
Year 3 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Select from AMME2200: Introductory Thermofluids or other units. | |
| 6 | MECH3460: Mechanical Systems Design 2 | |
| 6 | MTRX3700: Mechatronics 3 | |
| 6 | MTRX3760: Mechatronic Systems Design |
Year 4 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 2 | ENGG3111: Integrated Engineering 3 | |
| 6 | AMME3500: System Dynamics and Control | |
| 6 | ELEC3204: Power Electronics and Applications | |
| 6 | MECH3660: Manufacturing Engineering | |
| 6 | ELEC3404: Electronic Circuit Design |
Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.
Year 4 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 18 | Select from Mechatronic Senior Advanced Specialist Electives | |
| 6 | AMME4111: Thesis A | |
| 0 | ENGG4000: Practical Experience |
Note: At least 24 cp must be completed from this list of Senior Advanced Specialist units.
Year 5 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 2 | ENGG4111: Integrated Engineering 4 | |
| 6 | Mechatronic Senior Advanced Specialist Electives | |
| 6 | Select from Engineering General Electives or other units. | |
| 6 | AMME4112: Thesis B |
Note: At least 24 cp must be completed from this list of Senior Advanced Specialist units.
ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.
Requirements for this Pathway
From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.
You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors
48cp Majors
| Type | CP | CP From |
| View complete Program Structure | ||
Note:
From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.
You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors
Major in Space Engineering (24cp)
| Type | CP | CP From |
Core
|
6 |
AERO2705: Space Engineering 1 Note: Replaces AMME1362 |
Core
|
6 |
AERO3760: Space Engineering 2 Note: Replaces MECH3460 |
Core
|
6 |
AERO4701: Space Engineering 3 |
| 6 |
Select from
Unit Block Space Specialist Electives |
|
| View complete Program Structure | ||
Note: To be eligible for this major, students are required to complete the 24cp of units as listed and meet progression requirements. There are ATAR (>99) or WAM (>75%) entry requirements for this major.
Block 1 - Space Specialist Electives (Min CP: 6,Max CP: 6)
| Unit Code | Unit Name | CP | Sessions Offered |
| AERO4260 | Aerodynamics 2 | 6 |
Semester 1 |
| AERO4360 | Aerospace Structures 2 | 6 |
Semester 1 |
| AERO4560 | Flight Mechanics 2 | 6 |
Semester 2 |
| AERO5700 | Space Engineering (Advanced) | 6 |
Semester 1 Semester 2 |
| AMME5202 | Computational Fluid Dynamics | 6 |
Semester 1 |
| AMME5510 | Vibration and Acoustics | 6 |
Semester 2 |
Block 2 - Engineering General Electives (Min CP: 6,Max CP: 6)
| Unit Code | Unit Name | CP | Sessions Offered |
| ENGG1000 | History and Philosophy of Engineering | 6 |
Semester 1 |
Note:
Students may take 6 credit points of free general electives to complete the total number of credit points for their degree. Students may take the following units of study as free general electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.
(1) Any units of study from the Faculties of: (i) Engineering and Information Technologies (ii) Science (iii) Arts (iv) Sydney Business School
(2) Any other units of study approved by the Faculty of Engineering and Information Technologies Courses Committee, which will be published in an appropriate place by the Faculty.
(3) Any units of study approved by the Dean (or his/her delegate in these matters), or by the relevant Head of School or Program Director, on a case by case basis upon application by the student.
Block 3 - Mechatronic Senior Advanced Specialist Electives (Min CP: 24,Max CP: 30)
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2 |
| AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1 |
| AMME5790 | Introduction to Biomechatronics | 6 |
Semester 2 |
| MECH5720 | Sensors and Signals | 6 |
Semester 2 |
| MTRX5700 | Experimental Robotics | 6 |
Semester 1 |
Note: Students are required to complete at least 24 cp (four units of study) from this list.
Block 4 - Mechatronic Specialist Electives (Min CP: 12,Max CP: 24)
Note:
Students are strongly recommended to complete one of AMME2000 or MATH2021, but not both.
Up to 24 credit points (four units of study) may be selected from these units, with up to 6 credit points (one unit) of general electives.
The following units are approved as general electives for Bachelor of Engineering Honours Students, provided that students are able to meet the enrolment requirements specified by the relevant faculty and provided that the unit of study is not substantially the same as a unit of study already completed.
(1) All units offered by the following Faculties: Engineering and Information Technologies, Business, Science, Arts and Social Sciences.
(2) Additional units as included in the list of approved general Engineering electives, as approved by the Faculty Board (or, within delegated authority, the Faculty Courses Committee).
Block 5 - Engineering Core (Min CP: 36,Max CP: 36)
Block 6 - Mechatronic Stream Core (Min CP: 108,Max CP: 108)
| Course: | Mechatronic Engineering (mid-year) (2017) |
| CP Required: | 192 |
| Min FT Duration: | 4.00 Years |
| Min PT Duration: | 4.00 Years |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016 |
| Requirements: | In summary the requirements are: Students must complete 192 credit points as follows: ► 36 credit points of Engineering core units ► 108 credit points of Mechatronic stream core units ► A minimum of 12 credit points of Mechatronic Specialist elective units ► A minimum of 24 credit points of Mechatronic Senior Advanced Specialist elective units ► A maximum of 6 credit points of General (Free) Electives The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above. The handbook rules governing this degree are as follows: To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must (a) successfully complete 192 credit points, comprising: (i) A minimum of 36cp from the Engineering Core Table, including all required units; (ii) A minimum of 108cp from the Mechatronic Stream Core Table, including all required units; (iii) A minimum of 48cp of additional units from the Mechatronic Stream Specialist Table, including satisfying any additional requirements specified for the Specialist Table; and; (b) have an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and (c) have an EIHWAM of at least 65 at the completion of the degree; and (d) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree. Candidates who satisfy Clause (a) above, but who have not satisfied each of Clauses (b), (c) and (d), will qualify for the award of the Bachelor of Engineering degree (i.e. the pass degree, awarded without Honours). Advanced units in Maths and Science Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling. Study Abroad Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units. Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study. Majors A major requires: (a) the completion of 24 credit points chosen from units of study listed in the table for that major; (b) satisfying any additional requirements specified for the major, and listed with the table of units for the major; (c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major. Faculty Resolutions Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/ |
