Faculty of Engineering

Software / Project Management (2017)


Note: This course version applies only to students first enrolling in 2017.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Software / Project Management (2017)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2018, 2017, 2016, 2015

2. Requirements

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points):

► 36 credit points of Engineering core units

► 102 credit points of Software stream core units

► 18 credit points of Software Specialist elective units

Project Management:

► 66 credit points of Project Management core units

► 18 credit points of Project Management elective units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete the core units of study as set out in the Bachelor of Project Management Unit of Study Table.

(b) 18cp from the Project Management Electives Table must be completed.

Engineering Honours Requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
3 Select from MATH1001: Differential Calculus


Note: This unit is discontinued from 2018. Replacement unit is MATH1021.
3 Select from MATH1002: Linear Algebra
6 Select from ENGG1850: Introduction to Project Management
6 Select from ENGG1111: Integrated Engineering 1
6 Select from INFO1103: Introduction to Programming


Note: This unit is discontinued from 2018. Replacement unit is INFO1113.

Note: A lot of UoS run by the School of Information Technologies are undergoing changes in 2018. If you started your degree prior to 2018 and are affected by these changes, then please consult your program director regarding replacement units to satisfy your degree requirements.

ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Year 1 - Semester 2

Type CP CP From
3 Select from MATH1003: Integral Calculus and Modelling


Note: This unit is discontinued from 2018. Replacement unit is MATH1023.
6 Select from PMGT1852: Facilitation and Stakeholder Engagement
3 Select from MATH1005: Statistical Thinking with Data
6 Select from ELEC1601: Introduction to Computer Systems
6 Select from INFO1105: Data Structures


Note: This unit is discontinued from 2018. Replacement unit is COMP2123.

Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Year 2 - Semester 1

Type CP CP From
6 Select from BUSS1040: Economics for Business Decision Making
6 Select from MATH2069: Discrete Mathematics and Graph Theory
6 Select from ENGG2850: Project Cost and Finance
6 Select from ISYS2110: Analysis & Design of Web Information Systems

Note: Up to 12 credit points of general electives may be taken.

Year 2 - Semester 2

Type CP CP From
2 Select from ENGG2111: Integrated Engineering 2
6 Select from ENGG2855: Project Acceptance
6 Select from ISYS2120: Data & Information Management
6 Select from Unit Block:
Project Management Electives
6 Select from ENGG2852: Project Based Organisational Behaviour [not offered in 2020]


Note: This unit is discontinued from 2019. Replacement unit is PMGT2854.

Note: Up to 12 credit points of general electives may be taken.

ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.

Year 3 - Semester 1

Type CP CP From
6 Select from Unit Block:
Software Specialist - Electives
6 Select from ENGG2851: Project Analytics
6 Select from COMP2017: Systems Programming
6 Select from INFO3333: Computing 3 Management

Note: At least 6 CP of software specialist electives must be taken (to complete the 108 CP for the software degree), this may be taken in either semester.

Year 3 - Semester 2

Type CP CP From
6 Select from INFO3616: Principles of Security and Security Engineering
6 Select from PMGT3855: Project Variance Analysis
6 Select from ENGG3854: Legal Aspects of Projects
6 Select from Unit Block:
Software Specialist - Electives

Year 4 - Semester 1

Type CP CP From
6 Select from ENGG3853: Project Risk Management: Tools & Techniques
6 Select from PMGT3856: Sustainability and Knowledge Management
2 Select from ENGG3111: Integrated Engineering 3
6 Select from COMP3027: Algorithm Design
6 Select from SOFT3202: Software Construction and Design 2

Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.

Year 4 - Semester 2

Type CP CP From
6 Select from PMGT3857: International Project Management
6 Select from ELEC3609: Internet Software Platforms
6 Select from INFO3315: Human-Computer Interaction
6 Select from SOFT3413: Software Development Project [not offered in 2020]

Year 5 - Semester 1

Type CP CP From
0 Select from ENGG4000: Practical Experience
2 Select from ENGG4111: Integrated Engineering 4
6 Select from PMGT3858: Adapting to Project Context
6 Select from COMP5348: Enterprise Scale Software Architecture
6 Select from ELEC5618: Software Quality Engineering
6 Select from ELEC4712: Thesis A

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.

Year 5 - Semester 2

Type CP CP From
6 Select from Unit Block:
Software Specialist - Electives
6 Select from ELEC4713: Thesis B
6 Select from ELEC5619: Object Oriented Application Frameworks

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AERO2711 Aerospace Engineering Project 1 6 Semester 1
Semester 2
Int February
Int July
AERO3711 Aerospace Engineering Project 2 6 Semester 1
Semester 2
Int February
Int July
AERO4711 Aerospace Engineering Project 3 6 Semester 1
Semester 2
Int February
Int July
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1061 Advanced Engineering 1 6 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2062 Engineering Project: Business Plan 2 Adv 6 Semester 2
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3062 Technology Education (Advanced) 6 Semester 2
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4000 Practical Experience 0 Int January
Int February
Int March
Int April
Int May
Int June
Int July
Int August
Int September
Int October
Int November
Int December
ENGG4064 Advanced Engineering Design A 6 Semester 2
Int July
ENGG4065 Advanced Engineering Design B 6 Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
MATH1001 Differential Calculus 3 Semester 1
Summer Main
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1003 Integral Calculus and Modelling 3 Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1901 Differential Calculus (Advanced) 3 Semester 1
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1903 Integral Calculus and Modelling Advanced 3 Semester 2
MATH1905 Statistics (Advanced) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGG4000 Practical Experience (0cp)

- Exactly 6cp from ENGG1111 Integrated Engineering 1 (6cp) OR ENGG1061 Advanced Engineering 1A (6cp) (see note 1)

- At least 2cp from ENGG2xxx Integrated Engineering 2 (2cp) OR AERO2711 Aerospace Engineering Project 1 (see note 1)

- At least 2cp from ENGG3xxx Integrated Engineering 3 (2cp) OR ENGG3062 Technology Education (Advanced) (6cp) (see note 1) OR AERO3711 Advanced Aerospace Project 2 (see note 1)

- At least 2cp from ENGG4xxx Integrated Engineering 4 (2cp) OR ENGG4064 Advanced Engineering Design A (6cp) (see note 1) OR ENGG4065 Advanced Engineering Design B (6cp) (see note 1) OR AERO4711 Advanced Aerospace Project 3 (see note 1)

- Exactly 12cp of MATH1xxxx units: MATH1001 Differential Calculus (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1003 Integral Calculus AND Modelling (3cp) MATH1005 Statistics (3cp)

- A minimum of 12cp (see note 2) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. The Advanced Engineering units are only available to students who have been accepted into the relevant year of the Advanced Engineering program.

Note 2. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Software Core (Min CP: 102,Max CP: 102)

Unit Code Unit Name CP Sessions Offered
COMP2017 Systems Programming 6 Semester 1
COMP3027 Algorithm Design 6 Semester 1
COMP5348 Enterprise Scale Software Architecture 6 Semester 2
ELEC1601 Introduction to Computer Systems 6 Semester 1
Semester 2
ELEC3609 Internet Software Platforms 6 Semester 2
ELEC5618 Software Quality Engineering 6 Semester 1
ELEC5619 Object Oriented Application Frameworks 6 Semester 2
INFO1103 Introduction to Programming 6 Semester 1
Semester 2
INFO1105 Data Structures 6 Semester 2
Summer Early
Summer Main
INFO3315 Human-Computer Interaction 6 Semester 2
INFO3333 Computing 3 Management 6 Semester 1
Semester 2
INFO3616 Principles of Security and Security Engineering 6 Semester 2
ISYS2110 Analysis & Design of Web Information Systems 6 Semester 1
ISYS2120 Data & Information Management 6 Semester 2
MATH2069 Discrete Mathematics and Graph Theory 6 Semester 1
SOFT3202 Software Construction and Design 2 6 Semester 1
SOFT3413 Software Development Project [not offered in 2020] 6 Semester 2

Note: Complete all 17 units of study (102 credit points) from this table

Block 3 - Project Management Core (Min CP: 66,Max CP: 66)

Unit Code Unit Name CP Sessions Offered
BUSS1040 Economics for Business Decision Making 6 Semester 1
Semester 2
ENGG1850 Introduction to Project Management 6 Semester 1
ENGG2850 Project Cost and Finance 6 Semester 1
ENGG2851 Project Analytics 6 Semester 1
ENGG2852 Project Based Organisational Behaviour [not offered in 2020] 6 Semester 2
ENGG2855 Project Acceptance 6 Semester 1
ENGG3853 Project Risk Management: Tools & Techniques 6 Semester 1
ENGG3854 Legal Aspects of Projects 6 Semester 1
Semester 2
PMGT1852 Facilitation and Stakeholder Engagement 6 Semester 2
PMGT3855 Project Variance Analysis 6 Semester 2
PMGT3858 Adapting to Project Context 6 Semester 1

Block 4 - Software Specialist - Electives (Min CP: 18,Max CP: 54)

Unit Code Unit Name CP Sessions Offered
COMP3109 Programming Languages and Paradigms 6 Semester 2
COMP3308 Introduction to Artificial Intelligence 6 Semester 1
COMP3419 Graphics and Multimedia 6 Semester 2
COMP3456 Computational Methods for Life Sciences 6
COMP3520 Operating Systems Internals 6 Semester 2
COMP3608 Introduction to Artificial Intelligence (Adv) 6 Semester 1
COMP5045 Computational Geometry 6 Semester 1
COMP5047 Pervasive Computing 6 Semester 2
COMP5048 Visual Analytics 6 Semester 1
Semester 2
COMP5116 Design of Networks & Distributed Systems 6 Semester 2
COMP5206 Information Technologies and Systems 6 Semester 1
COMP5213 Computer and Network Organisation 6 Semester 1
COMP5318 Machine Learning and Data Mining 6 Semester 1
Semester 2
COMP5338 Advanced Data Models 6 Semester 2
COMP5415 Multimedia Design and Authoring 6 Semester 2
COMP5416 Advanced Network Technologies 6 Semester 2
COMP5424 Information Technology in Biomedicine 6 Semester 1
COMP5425 Multimedia Retrieval 6 Semester 1
COMP5426 Parallel and Distributed Computing 6 Semester 1
ELEC3104 Engineering Electromagnetics 6 Semester 1
ELEC3203 Electricity Networks 6 Semester 1
ELEC3204 Power Electronics and Applications 6 Semester 1
ELEC3206 Electrical Energy Conversion Systems 6 Semester 2
ELEC3304 Control 6 Semester 2
ELEC3305 Digital Signal Processing 6 Semester 1
ELEC3404 Electronic Circuit Design 6 Semester 1
ELEC3405 Communications Electronics and Photonics 6 Semester 2
ELEC3505 Communications 6 Semester 1
ELEC3506 Communications Networks 6 Semester 2
ELEC3607 Embedded Systems 6 Semester 1
ELEC3608 Computer Architecture 6 Semester 2
ELEC3610 E-Business Analysis and Design 6 Semester 1
ELEC3702 Management for Engineers 6 Semester 2
ELEC3802 Fundamentals of Biomedical Engineering 6 Semester 1
ELEC3803 Bioelectronics [not offered in 2021] 6 Semester 2
ELEC4505 Digital Communication Systems 6 Semester 1
ELEC4706 Project Management 6 Semester 1
ELEC5101 Antennas and Propagation 6 Semester 2
ELEC5203 Topics in Power Engineering [not offered in 2021] 6 Semester 2
ELEC5204 Power Systems Analysis and Protection 6 Semester 1
ELEC5205 High Voltage Engineering 6 Semester 2
ELEC5206 Sustainable Energy Systems 6 Semester 2
ELEC5207 Advanced Power Conversion Technologies 6 Semester 2
ELEC5208 Intelligent Electricity Networks 6 Semester 1
ELEC5211 Power System Dynamics and Control 6 Semester 1
ELEC5212 Power System Planning and Markets 6 Semester 2
ELEC5303 Computer Control System Design [not Offered 2021] 6 Semester 1
ELEC5402 Digital Integrated Circuit Design 6
ELEC5403 Radio Frequency Engineering [not offered in 2021] 6 Semester 1
ELEC5507 Error Control Coding 6 Semester 1
ELEC5508 Wireless Engineering 6 Semester 2
ELEC5509 Mobile Networks 6 Semester 1
ELEC5510 Satellite Communication Systems 6 Semester 2
ELEC5511 Optical Communication Systems 6 Semester 1
ELEC5512 Optical Networks 6 Semester 2
ELEC5514 IoT Wireless Sensing and Networking 6 Semester 2
ELEC5516 Electrical and Optical Sensor Design 6 Semester 1
ELEC5614 Real Time Computing 6 Semester 1
ELEC5615 Advanced Computer Architecture 6 Semester 1
ELEC5616 Computer and Network Security 6 Semester 1
ELEC5617 Topics in Software Engineering 6 Semester 2
ELEC5620 Model Based Software Engineering 6 Semester 2
ELEC5621 Digital Systems Design 6
ELEC5622 Signals, Software and Health 6 Semester 2
ELEC5701 Technology Venture Creation [not offered in 2021] 6 Semester 2
ELEC5803 Advanced Bioelectronics [Not Offered 2019] 6 Semester 1
ENGG3800 Industry and Community Projects 6 Semester 1
Semester 2
Int February
Int July
Int August
Int October
INFO3404 Database Systems 2 6 Semester 1
Semester 2
INFO3504 Database Systems 2 (Adv) 6 Semester 2
INFO3551 Information Technology Exchange 6 Semester 1
Semester 2
Int January
Int July
INFO5301 Information Security Management 6 Semester 1
Semester 2
INFO5990 Professional Practice in IT 6 Semester 1
Semester 2
INFO5991 Services Science Management and Engineering 6 Semester 2
INFO5992 Understanding IT Innovations 6 Semester 1
Semester 2
INFO5993 IT Research Methods 6 Semester 1
Semester 2
INFO6007 Project Management in IT 6 Semester 1
Semester 2

Note: At least 18cp are required from Software Specialist - Electives block.

Block 5 - Software Specialist - Senior (Max CP: 54)

Unit Code Unit Name CP Sessions Offered
COMP5045 Computational Geometry 6 Semester 1
COMP5047 Pervasive Computing 6 Semester 2
COMP5048 Visual Analytics 6 Semester 1
Semester 2
COMP5116 Design of Networks & Distributed Systems 6 Semester 2
COMP5206 Information Technologies and Systems 6 Semester 1
COMP5213 Computer and Network Organisation 6 Semester 1
COMP5318 Machine Learning and Data Mining 6 Semester 1
Semester 2
COMP5338 Advanced Data Models 6 Semester 2
COMP5415 Multimedia Design and Authoring 6 Semester 2
COMP5416 Advanced Network Technologies 6 Semester 2
COMP5424 Information Technology in Biomedicine 6 Semester 1
COMP5425 Multimedia Retrieval 6 Semester 1
COMP5426 Parallel and Distributed Computing 6 Semester 1
ELEC4505 Digital Communication Systems 6 Semester 1
ELEC4706 Project Management 6 Semester 1
ELEC5101 Antennas and Propagation 6 Semester 2
ELEC5203 Topics in Power Engineering [not offered in 2021] 6 Semester 2
ELEC5204 Power Systems Analysis and Protection 6 Semester 1
ELEC5205 High Voltage Engineering 6 Semester 2
ELEC5206 Sustainable Energy Systems 6 Semester 2
ELEC5207 Advanced Power Conversion Technologies 6 Semester 2
ELEC5208 Intelligent Electricity Networks 6 Semester 1
ELEC5211 Power System Dynamics and Control 6 Semester 1
ELEC5212 Power System Planning and Markets 6 Semester 2
ELEC5303 Computer Control System Design [not Offered 2021] 6 Semester 1
ELEC5402 Digital Integrated Circuit Design 6
ELEC5403 Radio Frequency Engineering [not offered in 2021] 6 Semester 1
ELEC5507 Error Control Coding 6 Semester 1
ELEC5508 Wireless Engineering 6 Semester 2
ELEC5509 Mobile Networks 6 Semester 1
ELEC5510 Satellite Communication Systems 6 Semester 2
ELEC5511 Optical Communication Systems 6 Semester 1
ELEC5512 Optical Networks 6 Semester 2
ELEC5514 IoT Wireless Sensing and Networking 6 Semester 2
ELEC5516 Electrical and Optical Sensor Design 6 Semester 1
ELEC5614 Real Time Computing 6 Semester 1
ELEC5615 Advanced Computer Architecture 6 Semester 1
ELEC5616 Computer and Network Security 6 Semester 1
ELEC5617 Topics in Software Engineering 6 Semester 2
ELEC5620 Model Based Software Engineering 6 Semester 2
ELEC5621 Digital Systems Design 6
ELEC5622 Signals, Software and Health 6 Semester 2
ELEC5701 Technology Venture Creation [not offered in 2021] 6 Semester 2
ELEC5803 Advanced Bioelectronics [Not Offered 2019] 6 Semester 1
INFO5301 Information Security Management 6 Semester 1
Semester 2
INFO5990 Professional Practice in IT 6 Semester 1
Semester 2
INFO5991 Services Science Management and Engineering 6 Semester 2
INFO5992 Understanding IT Innovations 6 Semester 1
Semester 2
INFO5993 IT Research Methods 6 Semester 1
Semester 2
INFO6007 Project Management in IT 6 Semester 1
Semester 2

Note: At least 18cp are required from Software Specialist - Junior/Senior blocks. 3rd Year Electives, it is recommended to take at least 2 units from here, and 3 from Junior. Not generally available to combined degrees

Block 6 - Project Management Electives (Min CP: 18,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
PMGT2854 Executing Projects 6 Semester 2
PMGT3856 Sustainability and Knowledge Management 6 Semester 1
PMGT3857 International Project Management 6 Semester 2

Note: Select one of these