1. Overview

Course:	Electrical / Commerce (2020)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 72 credit points of Electrical Stream core units

► 36 credit points of Electrical Specialist electives units

Commerce (96 credit points):

► 24 credit points of Commerce core units

► A major (48 credit points) from Table A of the Faculty of Commerce

► 12 credit points of OLE

► 12 credit points of elective units from Table A or Table S

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Commerce

For the Bachelor of Commerce component of a combined degree:

(a) The units of study that may be taken are set out in Table A of The University of Sydney Business School.

(b) Candidates must complete 96 credit points of units of study selected from the Table of Undergraduate Units of Study from The University of Sydney Business School including:

(i) any required degree core units as set out in Table A of the University of Sydney Business School; and

(ii) a major (48 credit points) or a 3-year program with an embedded major (except for the Professional Accounting Program) from Table A of the University of Sydney Business School; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the University of Sydney Business School or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the University of Sydney Business School.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. Students may take this unit in the final semester or may swap with an elective to take it earlier.

https://canvas.sydney.edu.au/courses/2806/pages/feit-changes-to-the-bachelor-of-engineering-honours-degree-how-they-affect-you

4. Pathways

Major in Intelligent Information Engineering

Type	CP	CP From
Electrical Core	12	Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering ELEC2302: Signals and Systems
Electrical Specialist - Electives	30	Select from ELEC3305: Digital Signal Processing ELEC3506: Communications Networks ELEC5304: Intelligent Visual Signal Understanding ELEC5307: Advanced Signal Processing with Deep Learning ELEC5622: Signals, Software and Health
Electrical Specialist - Electives	6	Select from ELEC5305: Acoustics, Speech and Signal Processing ELEC5306: Video Intelligence and Compression ELEC5516: Electrical and Optical Sensor Design ELEC5517: Software Defined Networks ELEC5701: Technology Venture Creation [not offered in 2021]

Major in Internet of Things (IoT)

Type	CP	CP From
Electrical Core	12	Select from ELEC2104: Electronic Devices and Circuits ELEC2602: Digital Logic
Electrical Specialist - Electives	30	Select from ELEC3506: Communications Networks ELEC5509: Mobile Networks ELEC5514: IoT Wireless Sensing and Networking ELEC5517: Software Defined Networks ELEC5518: IoT for Critical Infrastructures
Electrical Specialist - Electives	6	Select from ELEC5208: Intelligent Electricity Networks ELEC5508: Wireless Engineering ELEC5616: Computer and Network Security ELEC5760: Intelligent Networked Control Note: You may also select from COMP5047 Pervasive Computing, COMP5216 Mobile Computing or COMP5426 Parallel and Distributed Computing

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

Major in Power Engineering

Type	CP	CP From
Electrical Core	12	Select from ELEC2104: Electronic Devices and Circuits ELEC2302: Signals and Systems
Electrical Specialist - Electives	30	Select from ELEC3203: Electricity Networks ELEC3204: Power Electronics and Applications ELEC3206: Electrical Energy Conversion Systems ELEC3304: Control ELEC5204: Power Systems Analysis and Protection
Electrical Specialist - Electives	6	Select from ELEC5203: Topics in Power Engineering [not offered in 2021] ELEC5205: High Voltage Engineering ELEC5206: Sustainable Energy Systems ELEC5207: Advanced Power Conversion Technologies ELEC5208: Intelligent Electricity Networks ELEC5211: Power System Dynamics and Control ELEC5212: Power System Planning and Markets

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

Major in Telecommunications Engineering

Type	CP	CP From
Electrical Core	12	Select from ELEC2104: Electronic Devices and Circuits ELEC2302: Signals and Systems
Electrical Specialist - Electives	30	Select from ELEC3305: Digital Signal Processing ELEC3405: Communications Electronics and Photonics ELEC3505: Communications ELEC3506: Communications Networks ELEC4505: Digital Communication Systems
Electrical Specialist - Electives	6	Select from ELEC5101: Antennas and Propagation ELEC5508: Wireless Engineering ELEC5509: Mobile Networks ELEC5511: Optical Communication Systems ELEC5512: Optical Networks ELEC5516: Electrical and Optical Sensor Design ELEC5760: Intelligent Networked Control

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1004	Discrete Mathematics	3	Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Electrical Core (Min CP: 72,Max CP: 72)

Unit Code	Unit Name	CP	Sessions Offered
COMP2123	Data Structures & Algorithms	6	Semester 1 Semester 2
ELEC1103	Fundamentals of Electrical and Electronic Engineering	6	Semester 1
ELEC1601	Introduction to Computer Systems	6	Semester 1 Semester 2
ELEC2103	Simulation and Numerical Solutions in Engineering	6	Semester 2
ELEC2104	Electronic Devices and Circuits	6	Semester 2
ELEC2302	Signals and Systems	6	Semester 2
ELEC2602	Digital Logic	6	Semester 1
INFO1110	Introduction to Programming	6	Semester 1 Semester 2
MATH2061	Linear Mathematics and Vector Calculus	6	Semester 1 Summer Main
PHYS1001	Physics 1 (Regular)	6	Semester 1
PHYS1003	Physics 1 (Technological)	6	Semester 2
PHYS2213	Physics 2EE	6	Semester 2

Block 3 - Commerce Core (Min CP: 24,Max CP: 24)

Unit Code	Unit Name	CP	Sessions Offered
BUSS1000	Future of Business	6	Semester 1 Semester 2
BUSS1020	Quantitative Business Analysis	6	Semester 1 Semester 2
BUSS1030	Accounting, Business and Society	6	Semester 1 Semester 2
BUSS2000	Leading and Influencing in Business	6	Semester 1 Semester 2

Note: You must complete BUSS1000 in your first semester of enrolment.

Block 4 - Electrical Specialist - Electives (Min CP: 30,Max CP: 30)

Unit Code	Unit Name	CP	Sessions Offered
ELEC3104	Engineering Electromagnetics	6	Semester 1
ELEC3203	Electricity Networks	6	Semester 1
ELEC3204	Power Electronics and Applications	6	Semester 1
ELEC3206	Electrical Energy Conversion Systems	6	Semester 2
ELEC3304	Control	6	Semester 2
ELEC3305	Digital Signal Processing	6	Semester 1
ELEC3404	Electronic Circuit Design	6	Semester 1
ELEC3405	Communications Electronics and Photonics	6	Semester 2
ELEC3505	Communications	6	Semester 1
ELEC3506	Communications Networks	6	Semester 2
ELEC3607	Embedded Systems	6	Semester 1
ELEC3608	Computer Architecture	6	Semester 2
ELEC3609	Internet Software Platforms	6	Semester 2
ELEC3610	E-Business Analysis and Design	6	Semester 1
ELEC3612	Pattern Recognition and Machine Intelligence	6	Semester 1
ELEC3702	Management for Engineers	6	Semester 2
ELEC3802	Fundamentals of Biomedical Engineering	6	Semester 1
ELEC3803	Bioelectronics [not offered in 2021]	6	Semester 2
ELEC4505	Digital Communication Systems	6	Semester 1
ELEC4706	Project Management	6	Semester 1
ELEC5101	Antennas and Propagation	6	Semester 2
ELEC5203	Topics in Power Engineering [not offered in 2021]	6	Semester 2
ELEC5204	Power Systems Analysis and Protection	6	Semester 1
ELEC5205	High Voltage Engineering	6	Semester 2
ELEC5206	Sustainable Energy Systems	6	Semester 2
ELEC5207	Advanced Power Conversion Technologies	6	Semester 2
ELEC5208	Intelligent Electricity Networks	6	Semester 1
ELEC5211	Power System Dynamics and Control	6	Semester 1
ELEC5212	Power System Planning and Markets	6	Semester 2
ELEC5303	Computer Control System Design [not Offered 2021]	6	Semester 1
ELEC5304	Intelligent Visual Signal Understanding	6	Semester 1
ELEC5305	Acoustics, Speech and Signal Processing	6	Semester 2
ELEC5306	Video Intelligence and Compression	6	Semester 1
ELEC5307	Advanced Signal Processing with Deep Learning	6	Semester 2
ELEC5402	Digital Integrated Circuit Design	6
ELEC5403	Radio Frequency Engineering [not offered in 2021]	6	Semester 1
ELEC5405	Building Microchips: From Theory to Practice	6	Semester 1
ELEC5507	Error Control Coding	6	Semester 1
ELEC5508	Wireless Engineering	6	Semester 2
ELEC5509	Mobile Networks	6	Semester 1
ELEC5510	Satellite Communication Systems	6	Semester 2
ELEC5511	Optical Communication Systems	6	Semester 1
ELEC5512	Optical Networks	6	Semester 2
ELEC5514	IoT Wireless Sensing and Networking	6	Semester 2
ELEC5516	Electrical and Optical Sensor Design	6	Semester 1
ELEC5517	Software Defined Networks	6	Semester 2
ELEC5518	IoT for Critical Infrastructures	6	Semester 1
ELEC5614	Real Time Computing	6	Semester 1
ELEC5615	Advanced Computer Architecture	6	Semester 1
ELEC5616	Computer and Network Security	6	Semester 1
ELEC5617	Topics in Software Engineering	6	Semester 2
ELEC5618	Software Quality Engineering	6	Semester 1
ELEC5619	Object Oriented Application Frameworks	6	Semester 2
ELEC5620	Model Based Software Engineering	6	Semester 2
ELEC5621	Digital Systems Design	6
ELEC5622	Signals, Software and Health	6	Semester 2
ELEC5701	Technology Venture Creation [not offered in 2021]	6	Semester 2
ELEC5760	Intelligent Networked Control	6	Semester 2
ELEC5803	Advanced Bioelectronics [Not Offered 2019]	6	Semester 1

Note: A minimum of 30 credit points (five units of study) must be taken. Specialist units include all ELEC3xxx, ELEC4xxx and ELEC5xxx units of study.

Block 5 - Engineering General Electives

Unit Code	Unit Name	CP	Sessions Offered
COMP3520	Operating Systems Internals	6	Semester 2

Note: The following units are approved as general electives for Bachelor of Engineering Honours Students, provided that students are able to meet the enrolment requirements specified by the relevant faculty and provided that the unit of study is not substantially the same as a unit of study already completed.

(1) All units offered by the following Faculties: Engineering and Information Technologies, Business, Science, Arts and Social Sciences.

(2) Additional units as included in the list of approved general Engineering electives, as approved by the Faculty Board (or, within delegated authority, the Faculty Courses Committee).

Block 6 - Commerce Units (Max CP: 72)

Note: For the Bachelor of Commerce component, students are required to complete a total of 96 credit points of Commerce Table A units as listed in the handbook of the Business School, including 24 credit points of core units, a major or program from Table A and 12 credit points of OLEs. See Faculty handbooks at http://sydney.edu.au/handbooks