Faculty of Engineering

Software Engineering (2020)


Note: This course version applies only to students first enrolling in 2020.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Software Engineering (2020)
CP Required: 192
Min FT Duration: 4.00 Years
Min PT Duration: 4.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015

2. Requirements

Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 102 credit points of Software stream core units

► A minimum of 12 credit points of Software Specialist fundamentals units

► A minimum of 30 credit points of Software Specialist elective units

► A maximum of 12 credit points of General (Free) Electives

The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above.

Handbook Rules

The handbook rules governing this degree are as follows:

To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must:

(a) successfully complete 192 credit points comprising:

(i) A minimum of 36 credit points from the Engineering Core Table, including all required units;

(ii) A minimum of 108 credit points from the Engineering Stream Table pertaining to the specialist stream being undertaken, including all required units;

(iii) A minimum of 48 credit points of additional units from the Engineering Stream Specialist Table pertaining to the specialist stream being undertaken, including satisfying any additional requirements specified for the Specialist Table.

(b) Successfully complete the requirements of the Professional Engagement Program

(2) The class of Honours will be determined by the EIHWAM.

(3) In exceptional circumstances, the Dean may vary the conditions for the award of Honours after seeking the advice of the relevant Head of School.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester's standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 48 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

Dalyell Scholars Program

Unit substitutions may be available for students enrolled in the Dalyell Scholars Program, depending on their year of commencement and degree. Dalyell Scholars can view the Canvas page for further information specific to their circumstances: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type CP CP From
3 Select from MATH1021: Calculus of One Variable
6 Select from INFO1110: Introduction to Programming
6 Select from Unit Block:
Software Specialist - Fundamentals
3 Select from MATH1002: Linear Algebra
6 Select from ENGG1111: Integrated Engineering 1
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type CP CP From
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from INFO1113: Object-Oriented Programming
6 Select from Unit Block:
Software Specialist - Fundamentals
6 Select from ELEC1601: Introduction to Computer Systems
3 Select from MATH1005: Statistical Thinking with Data

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 2 - Semester 1

Type CP CP From
6 Select from COMP2017: Systems Programming
6 Select from COMP2123: Data Structures & Algorithms
6 Select from ISYS2110: Analysis & Design of Web Information Systems
6 Select from MATH2069: Discrete Mathematics and Graph Theory

Note: Up to 12 credit points of general electives may be taken.

Year 2 - Semester 2

Type CP CP From
6 Select from SOFT2201: Software Construction and Design 1
6 Select from SOFT2412: Agile Software Development Practices
6 Select from Unit Block:
Software Specialist - Fundamentals
6 Select from ISYS2120: Data & Information Management
2 Select from ENGG2111: Integrated Engineering 2


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: Up to 12 credit points of general electives may be taken.

Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. Students may take this unit in the final semester or may swap with an elective to take it earlier.

https://canvas.sydney.edu.au/courses/2806/pages/feit-changes-to-the-bachelor-of-engineering-honours-degree-how-they-affect-you

Year 3 - Semester 1

Type CP CP From
6 Select from SOFT3202: Software Construction and Design 2
18 Select from Unit Block:
Software Specialist - Electives
2 Select from ENGG3111: Integrated Engineering 3


Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.

Note: Up to 12 credit points of general electives may be taken.

Year 3 - Semester 2

Type CP CP From
6 Select from SOFT3888: Software Development Project
6 Select from INFO3616: Principles of Security and Security Engineering
6 Select from Unit Block:
Software Specialist - Electives
6 Select from ELEC3609: Internet Software Platforms

Note: Up to 12 credit points of general electives may be taken.

Year 4 - Semester 1

Type CP CP From
6 Select from Unit Block:
Software Specialist - Electives
2 Select from ENGG4111: Integrated Engineering 4
6 Select from ELEC5618: Software Quality Engineering
6 Select from ELEC4712: Thesis A
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes
6 Select from COMP5348: Enterprise Scale Software Architecture


Note: COMP5348 is discontinued. Students may take any of COMP4426, COMP4347, COMP4349 or ELEC5620 (from Software Specialist Electives collection) in place of this unit

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

Year 4 - Semester 2

Type CP CP From
6 Select from Unit Block:
Software Specialist - Electives
6 Select from ELEC5619: Object Oriented Application Frameworks
6 Select from ELEC4713: Thesis B

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

4. Pathways

Major in Computer Engineering

Type CP CP From
12 Select from COMP2017: Systems Programming
INFO1113: Object-Oriented Programming
12 Select from ELEC2104: Electronic Devices and Circuits
ELEC2602: Digital Logic
18 Select from ELEC3506: Communications Networks
ELEC3607: Embedded Systems
ELEC3608: Computer Architecture
6 Select from COMP3520: Operating Systems Internals
ELEC3104: Engineering Electromagnetics
ELEC3304: Control
ELEC3305: Digital Signal Processing
ELEC3404: Electronic Circuit Design
ELEC3702: Management for Engineers
ELEC5405: Building Microchips: From Theory to Practice

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

Major in Intelligent Information Engineering

Type CP CP From
12 Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering
ELEC2302: Signals and Systems
30 Select from ELEC3305: Digital Signal Processing
ELEC3506: Communications Networks
ELEC5307: Advanced Signal Processing with Deep Learning
ELEC5622: Signals, Software and Health


Note: ELEC5304 can be selected from General Electives
6 Select from ELEC5305: Acoustics, Speech and Signal Processing
ELEC5306: Video Intelligence and Compression
ELEC5516: Electrical and Optical Sensor Design
ELEC5517: Software Defined Networks
ELEC5701: Technology Venture Creation [not offered in 2021]

Major in Internet of Things (IoT)

Type CP CP From
12 Select from ELEC2104: Electronic Devices and Circuits
ELEC2602: Digital Logic
30 Select from ELEC3506: Communications Networks
ELEC5509: Mobile Networks
ELEC5514: IoT Wireless Sensing and Networking
ELEC5517: Software Defined Networks
ELEC5518: IoT for Critical Infrastructures
6 Select from COMP5047: Pervasive Computing
COMP5216: Mobile Computing
COMP5426: Parallel and Distributed Computing
ELEC5208: Intelligent Electricity Networks
ELEC5508: Wireless Engineering
ELEC5616: Computer and Network Security
ELEC5760: Intelligent Networked Control

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units. It is highly recommended that you take ELEC1103 as an elective prior to attempting ELEC2104 or higher level ELEC units.

Major in Power Engineering

Type CP CP From
12 Select from ELEC2104: Electronic Devices and Circuits
ELEC2302: Signals and Systems
30 Select from ELEC3203: Electricity Networks
ELEC3204: Power Electronics and Applications
ELEC3206: Electrical Energy Conversion Systems
ELEC3304: Control
ELEC5204: Power Systems Analysis and Protection
6 Select from ELEC5203: Topics in Power Engineering [not offered in 2021]
ELEC5205: High Voltage Engineering
ELEC5206: Sustainable Energy Systems
ELEC5207: Advanced Power Conversion Technologies
ELEC5208: Intelligent Electricity Networks
ELEC5211: Power System Dynamics and Control
ELEC5212: Power System Planning and Markets

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units. It is highly recommended that you take ELEC1103 as an elective prior to attempting ELEC2104 or higher level ELEC units.

Major in Telecommunications Engineering

Type CP CP From
12 Select from ELEC2104: Electronic Devices and Circuits
ELEC2302: Signals and Systems
30 Select from ELEC3305: Digital Signal Processing
ELEC3405: Communications Electronics and Photonics
ELEC3505: Communications
ELEC3506: Communications Networks
ELEC4505: Digital Communication Systems
6 Select from ELEC5101: Antennas and Propagation
ELEC5508: Wireless Engineering
ELEC5509: Mobile Networks
ELEC5511: Optical Communication Systems
ELEC5512: Optical Networks
ELEC5516: Electrical and Optical Sensor Design

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units. It is highly recommended that you take ELEC1103 as an elective prior to attempting ELEC2104 or higher level ELEC units.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - Software Core (Min CP: 102,Max CP: 102)

Unit Code Unit Name CP Sessions Offered
COMP2017 Systems Programming 6 Semester 1
COMP2123 Data Structures & Algorithms 6 Semester 1
Semester 2
COMP5348 Enterprise Scale Software Architecture 6 Semester 2
ELEC1601 Introduction to Computer Systems 6 Semester 1
Semester 2
ELEC3609 Internet Software Platforms 6 Semester 2
ELEC5618 Software Quality Engineering 6 Semester 1
ELEC5619 Object Oriented Application Frameworks 6 Semester 2
INFO1110 Introduction to Programming 6 Semester 1
Semester 2
INFO1113 Object-Oriented Programming 6 Semester 1
Semester 2
INFO3616 Principles of Security and Security Engineering 6 Semester 2
ISYS2110 Analysis & Design of Web Information Systems 6 Semester 1
ISYS2120 Data & Information Management 6 Semester 2
MATH2069 Discrete Mathematics and Graph Theory 6 Semester 1
SOFT2201 Software Construction and Design 1 6 Semester 2
SOFT2412 Agile Software Development Practices 6 Semester 2
SOFT3202 Software Construction and Design 2 6 Semester 1
SOFT3888 Software Development Project 6 Semester 2

Note: Complete all 17 units of study (102 credit points) from this table

Block 3 - Software Specialist - Fundamentals (Min CP: 12,Max CP: 18)

Unit Code Unit Name CP Sessions Offered
BUSS1030 Accounting, Business and Society 6 Semester 1
Semester 2
COMP2022 Models of Computation 6 Semester 2
COMP2922 Models of Computation (Adv) 6 Semester 2
DATA1001 Foundations of Data Science 6 Semester 1
Semester 2
DATA1002 Informatics: Data and Computation 6 Semester 2
DATA1902 Informatics: Data and Computation (Advanced) 6 Semester 2
DATA2001 Data Science: Big Data and Data Diversity 6 Semester 1
DATA2002 Data Analytics: Learning from Data 6 Semester 2
DATA2901 Big Data and Data Diversity (Advanced) 6 Semester 1
ELEC1004 Practical Introduction to Electrical Engineering 6 Semester 1
ELEC2100 Fundamentals of Elec and Electronic Eng 6 Semester 1
ELEC2103 Simulation and Numerical Solutions in Engineering 6 Semester 2
ELEC2104 Electronic Devices and Circuits 6 Semester 2
ELEC2302 Signals and Systems 6 Semester 2
ELEC2602 Digital Logic 6 Semester 1
INFO1110 Introduction to Programming 6 Semester 1
Semester 2
INFO2150 Introduction to Health Data Science 6 Semester 2
ISYS2160 Information Systems in the Internet Age 6 Semester 2
MATH2061 Linear Mathematics and Vector Calculus 6 Semester 1
Summer Main
MKTG1001 Marketing Principles 6 Semester 1
Semester 2
PHYS1001 Physics 1 (Regular) 6 Semester 1
PHYS1003 Physics 1 (Technological) 6 Semester 2
PHYS2213 Physics 2EE 6 Semester 2
SOFT2201 Software Construction and Design 1 6 Semester 2
SOFT2412 Agile Software Development Practices 6 Semester 2

Note: 1st and 2nd year Single Degree Electives

Block 4 - Software Specialist - Electives (Min CP: 30,Max CP: 48)

Unit Code Unit Name CP Sessions Offered
BMET3802 Biomedical Instrumentation 6 Semester 2
COMP3109 Programming Languages and Paradigms 6 Semester 2
COMP3308 Introduction to Artificial Intelligence 6 Semester 1
COMP3419 Graphics and Multimedia 6 Semester 2
COMP3520 Operating Systems Internals 6 Semester 2
COMP3608 Introduction to Artificial Intelligence (Adv) 6 Semester 1
COMP4216 Mobile Computing 6 Semester 2
COMP4270 Randomised and Advanced Algorithms 6 Semester 2
COMP4318 Machine Learning and Data Mining 6 Semester 1
Semester 2
COMP4338 Advanced Data Models 6 Semester 2
COMP4347 Web Application Development 6 Semester 1
COMP4349 Cloud Computing 6 Semester 1
COMP4415 Multimedia Design and Authoring 6 Semester 2
COMP4416 Advanced Network Technologies 6 Semester 2
COMP4424 Information Technology in Biomedicine 6 Semester 1
COMP4425 Multimedia Retrieval 6 Semester 1
COMP4426 Parallel and Distributed Computing 6 Semester 1
COMP4445 Computational Geometry 6 Semester 1
COMP4447 Pervasive Computing 6 Semester 2
COMP4448 Visual Analytics 6 Semester 1
Semester 2
COMP4530 Discrete Optimisation 6 Semester 2
COMP5047 Pervasive Computing 6 Semester 2
COMP5206 Information Technologies and Systems 6 Semester 2
COMP5216 Mobile Computing 6 Semester 2
COMP5426 Parallel and Distributed Computing 6 Semester 1
DATA3404 Scalable Data Management 6 Semester 1
DATA4207 Data Analysis in the Social Sciences 6 Semester 1
ELEC3104 Engineering Electromagnetics 6 Semester 1
ELEC3203 Electricity Networks 6 Semester 1
ELEC3204 Power Electronics and Applications 6 Semester 1
ELEC3206 Electrical Energy Conversion Systems 6 Semester 2
ELEC3304 Control 6 Semester 2
ELEC3305 Digital Signal Processing 6 Semester 1
ELEC3404 Electronic Circuit Design 6 Semester 1
ELEC3405 Communications Electronics and Photonics 6 Semester 2
ELEC3505 Communications 6 Semester 1
ELEC3506 Communications Networks 6 Semester 2
ELEC3607 Embedded Systems 6 Semester 1
ELEC3608 Computer Architecture 6 Semester 2
ELEC3610 E-Business Analysis and Design 6 Semester 1
ELEC3611 Humans and Devices [not offered in 2021] 6 Semester 1
ELEC3612 Pattern Recognition and Machine Intelligence 6 Semester 1
ELEC3702 Management for Engineers 6 Semester 2
ELEC3802 Fundamentals of Biomedical Engineering 6 Semester 1
ELEC3803 Bioelectronics [not offered in 2021] 6 Semester 2
ELEC4505 Digital Communication Systems 6 Semester 1
ELEC5101 Antennas and Propagation 6 Semester 2
ELEC5203 Topics in Power Engineering [not offered in 2021] 6 Semester 2
ELEC5204 Power Systems Analysis and Protection 6 Semester 1
ELEC5205 High Voltage Engineering 6 Semester 2
ELEC5206 Sustainable Energy Systems 6 Semester 2
ELEC5207 Advanced Power Conversion Technologies 6 Semester 2
ELEC5208 Intelligent Electricity Networks 6 Semester 1
ELEC5211 Power System Dynamics and Control 6 Semester 1
ELEC5212 Power System Planning and Markets 6 Semester 2
ELEC5213 Engineering Optimisation 6 Semester 1
ELEC5304 Intelligent Visual Signal Understanding 6 Semester 1
ELEC5306 Video Intelligence and Compression 6 Semester 1
ELEC5307 Advanced Signal Processing with Deep Learning 6 Semester 2
ELEC5308 Intelligent Information Engineering Practice 6 Semester 2
ELEC5405 Building Microchips: From Theory to Practice 6 Semester 1
ELEC5507 Error Control Coding 6 Semester 1
ELEC5508 Wireless Engineering 6 Semester 2
ELEC5509 Mobile Networks 6 Semester 1
ELEC5510 Satellite Communication Systems 6 Semester 2
ELEC5511 Optical Communication Systems 6 Semester 1
ELEC5512 Optical Networks 6 Semester 2
ELEC5514 IoT Wireless Sensing and Networking 6 Semester 2
ELEC5516 Electrical and Optical Sensor Design 6 Semester 1
ELEC5616 Computer and Network Security 6 Semester 1
ELEC5620 Model Based Software Engineering 6 Semester 2
ELEC5622 Signals, Software and Health 6 Semester 2
ELEC5701 Technology Venture Creation [not offered in 2021] 6 Semester 2
ELEC5760 Intelligent Networked Control 6 Semester 2
ENGG3800 Industry and Community Projects 6 Semester 1
Semester 2
Int February
Int July
Int August
Int October
INFO3551 Information Technology Exchange 6 Semester 1
Semester 2
Int January
Int July
INFO4491 Services Science Management and Engineering 6 Semester 2
INFO5301 Information Security Management 6 Semester 1
Semester 2
INFO5990 Professional Practice in IT 6 Semester 1
Semester 2
INFO5992 Understanding IT Innovations 6 Semester 1
Semester 2
INFO5993 IT Research Methods 6 Semester 1
Semester 2
INFO6007 Project Management in IT 6 Semester 1
Semester 2
ISYS3400 Information Systems Project 6 Semester 2
ISYS3401 Information Technology Evaluation 6 Semester 1
ISYS3402 Decision Analytics & Support Systems [not running in 2019] 6 Semester 2
ISYS3888 Information Systems Project 6 Semester 2
SOFT3410 Concurrency for Software Development 6 Semester 2

Note: At least 42cp are required from Software Specialist - Fundamentals/Electives blocks.

3rd Year Electives: It is recommended to take at least 2 units from Level 4 Units and 3 units from Level 3 Units.

Block 6 - Engineering General Electives (Max CP: 12)

Note: Students may take 12 credit points of free general electives to complete the total number of credit points for their degree. Students may take the following units of study as free general electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculties of: (i) Engineering and Information Technologies (ii) Science (iii) Arts (iv) Sydney Business School

(2) Any other units of study approved by the Faculty of Engineering and Information Technologies Courses Committee, which will be published in an appropriate place by the Faculty.

(3) Any units of study approved by the Dean (or his/her delegate in these matters), or by the relevant Head of School or Program Director, on a case by case basis upon application by the student.