Note: This course version is currently under review and is subject to change.
ProgramsEngENGI (UG)BEHons CombinedBE/BABE/BA to 2022Mechatronic / Arts (2022 and earlier) (2018)
Show information forcommencing students (ie. started First Year then).
Print View | Download as PDF Administrative Information (Fees, ATAR etc.)
Year 1 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Arts | |
| 6 | ENGG1111: Integrated Engineering 1 | |
| 3 | MATH1021: Calculus of One Variable | |
| 3 | MATH1002: Linear Algebra | |
| 6 | ENGG1801: Engineering Computing | |
| 0 | ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024
Year 1 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Arts | |
| 3 | MATH1023: Multivariable Calculus and Modelling | |
| 6 | AMME1362: Introduction to Engineering Materials | |
| 6 | ENGG1802: Engineering Mechanics | |
| 3 | MATH1005: Statistical Thinking with Data |
Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024
Year 2 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 12 | Select from Arts | |
| 6 | ELEC1103: Fundamentals of Electrical and Electronic Engineering | |
| 6 | AMME2500: Engineering Dynamics |
Year 2 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Arts | |
| 6 | MTRX1705: Introduction to Mechatronic Design | |
| 6 | MTRX1702: Mechatronics 1 | |
| 6 | ELEC2104: Electronic Devices and Circuits | |
| 0 | ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Year 3 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | MECH3660: Manufacturing Engineering | |
| 12 | Select from Arts | |
| 6 | MTRX2700: Mechatronics 2 |
Year 3 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 12 | Select from Arts | |
| 2 | ENGG2111: Integrated Engineering 2 | |
| 6 | AMME2301: Mechanics of Solids | |
| 6 | MECH2400: Mechanical Systems Design 1 Note: From 2024, MECH2400 is offered in Semester 1 only. Students who have not completed MECH2400 should discuss an enrolment plan with their Academic Advisor. |
Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Year 4 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 18 | Select from Arts | |
| 6 | AMME3500: System Dynamics and Control | |
| 2 | ENGG3111: Integrated Engineering 3 |
Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Year 4 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Arts | |
| 6 | MECH3460: Mechanical Systems Design 2 | |
| 6 | MTRX3700: Mechatronics 3 | |
| 6 | MTRX3760: Mechatronic Systems Design |
Year 5 - Semester 1
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 2 | ENGG4111: Integrated Engineering 4 | |
| 6 | Mechatronic Specialist Electives | |
| 6 | AMME4111: Thesis A | |
| 12 | Select from Arts | |
| 0 | ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes |
Note: Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Year 5 - Semester 2
| SITS Diet Block/Type | CP | Unit of Study/Unit Block |
| 6 | Mechatronic Specialist Electives | |
| 6 | Arts | |
| 6 | AMME4112: Thesis B |
Additional Requirements for Major
| Type | CP | CP From |
Core | 6 | AERO2705: Space Engineering 1 Note:Replacing ENGG1111 |
Core | 6 | AERO3760: Space Engineering 2 Note:Replacing MECH3460 |
Core | 6 | AERO4701: Space Engineering 3 |
| 6 | Select from Space Specialist Electives |
To be eligible for this major students must complete the 24 cp listed. There are ATAR and WAM entry requirements for enrolment in this major.
This major can be taken along with any of the available Arts majors.
48cp Majors
| Type | CP | CP From |
| View complete Program Structure | ||
Note:
From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.
You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors
Major in Space Engineering (24cp)
| Type | CP | CP From |
Core
|
6 |
AERO2705: Space Engineering 1 Note: Replacing ENGG1111 |
Core
|
6 |
AERO3760: Space Engineering 2 Note: Replacing MECH3460 |
Core
|
6 |
AERO4701: Space Engineering 3 |
| 6 |
Select from
Unit Block Space Specialist Electives |
|
| View complete Program Structure | ||
Note:
To be eligible for this major students must complete the 24 cp listed. There are ATAR and WAM entry requirements for enrolment in this major.
This major can be taken along with any of the available Arts majors.
Block 1 - Engineering Core (Min CP: 36,Max CP: 36)
Note:
Complete a minimum of 36cp including:
- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)
- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)
- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)
- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)
Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.
Block 2 - Mechatronic Stream Core (Min CP: 96,Max CP: 96)
Block 3 - Arts (Min CP: 96,Max CP: 96)
Note: For the Bachelor of Arts component, students are required to complete a total of 96 credit points of Table A units as listed in the handbook of the Faculty of Arts and Social Sciences, including a major from Table A and 12 credit points of OLE units of study. See Faculty handbooks at http://sydney.edu.au/handbooks
Block 4 - Mechatronic Specialist Electives (Min CP: 6,Max CP: 12)
| Unit Code | Unit Name | CP | Sessions Offered |
| AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2 |
| AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1 |
| AMME5790 | Introduction to Biomechatronics | 6 |
Semester 2 |
| MECH5720 | Sensors and Signals | 6 |
Semester 2 |
| MTRX5700 | Experimental Robotics | 6 |
Semester 1 |
Block 5 - Space Specialist Electives (Min CP: 6,Max CP: 6)
| Unit Code | Unit Name | CP | Sessions Offered |
| AERO4260 | Aerodynamics 2 | 6 |
Semester 1 |
| AERO4360 | Aerospace Structures 2 | 6 |
Semester 1 |
| AERO4560 | Flight Mechanics 2 | 6 |
Semester 2 |
| AERO5700 | Space Engineering (Advanced) | 6 |
Semester 1 Semester 2 |
Block 6 - Machine Learning Elective units (Max CP: 6)
| Unit Code | Unit Name | CP | Sessions Offered |
| COMP3308 | Introduction to Artificial Intelligence | 6 |
Semester 1 |
| COMP5318 | Machine Learning and Data Mining | 6 |
Semester 1 Semester 2 |
Note: Students may complete 6 credit points of Machine Learning Elective in place of a Specialist Elective unit.
| Course: | Mechatronic / Arts (2022 and earlier) (2018) |
| CP Required: | 240 |
| Min FT Duration: | 5.00 Years |
| Min PT Duration: | N/A |
| Faculty/School: | Faculty of Engineering |
| Years Offered: | 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
| Requirements: | Summary In summary the requirements are: Students must complete 240 credit points as follows: Engineering (144 credit points): ► 36 credit points of Engineering core units ► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp) ► 96 credit points of Mechatronic stream core units ► 12 credit points of Specialist Electives Arts: ► 96 credit points of Arts units The handbook rules governing this degree are as follows: (a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified. (b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree. To qualify for the award of the combined degree: Requirements for the Bachelor of Engineering Honours (a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree; (b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising: (i) 36 credit points from the Engineering Core Table, including all required units; (ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units; (c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream. Requirements for the Bachelor of Arts For the Bachelor of Arts component of a combined degree: (a) The units of study that may be taken are set out in Table A of the Faculty of Arts and Social Sciences, and Table S and Table O of the Shared Pool for Undergraduate Degrees. (c) Candidates must complete 96 credit points in the Bachelor of Arts including: (i) any required degree core units as set out in Table A of the degree in which the candidate is enrolled; and (ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Arts and Social Sciences; and (iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and (iv) where appropriate, additional electives from Table A of the Faculty of Arts and Social Sciences or Table S; (v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Arts and Social Sciences. Dalyell Scholars Program Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars Advanced units in Maths and Science Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling. Study Abroad Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units. Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study. Faculty Resolutions Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/ |
