2. Requirements

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (156 credit points):

► 36 credit points of Engineering core units

► 102 credit points of Software stream core units

► 18 credit points of Software Specialist elective units

Project Management:

► 66 credit points of Project Management core units

► 18 credit points of Project Management elective units

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering

For the Bachelor of Engineering component of a combined degree:

(a) The units of study that may be taken for the Bachelor of Engineering component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering single degree;

(b) Except where approved, all candidates must complete a minimum of 144 credit points comprising:

(i) 36cp from the Engineering Core Table, including all required units;

(ii) 108cp from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Candidates who do not meet the requirements for the award of the Bachelor of Engineering Honours but who have otherwise satisfied the requirements of the Bachelor of Engineering shall graduate with the Bachelor of Engineering pass degree.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete the core units of study as set out in the Bachelor of Project Management Unit of Study Table.

(b) 18cp from the Project Management Electives Table must be completed.

Engineering Honours Requirements

(a) an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(b) have an EIHWAM of at least 65 at the completion of the degree; and

(c) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy the requirements for the Engineering degree, but who have not satisfied each of Clauses (a), (b) and (c), will qualify for the award of the Bachelor of Engineering degree (i.e. the PASS degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021.
Software Core	6	Select from INFO1103: Introduction to Programming Note: This unit is discontinued from 2018. Replacement unit is INFO1113.
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Engineering Core	3	Select from MATH1002: Linear Algebra
Project Management Core	6	Select from ENGG1850: Introduction to Project Management

Note: A lot of UoS run by the School of Information Technologies are undergoing changes in 2018. If you started your degree prior to 2018 and are affected by these changes, then please consult your program director regarding replacement units to satisfy your degree requirements.

ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.

Year 1 - Semester 2

Type	CP	CP From
Engineering Core	3	Select from MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023.
Software Core	6	Select from INFO1105: Data Structures Note: This unit is discontinued from 2018. Replacement unit is COMP2123.
Software Core	6	Select from ELEC1601: Introduction to Computer Systems
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data
Project Management Core	6	Select from PSYC1002: Psychology 1002

Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Students who fail PSYC1002 in 2016, can either take up PSYC1001 in S1 of 2017 or PMGT1852 in S2 2017.

Year 2 - Semester 1

Type	CP	CP From
Software Core	6	Select from INFO2120: Database Systems 1 Note: This unit is discontinued from 2018. Replacement unit is ISYS2120.
Software Core	6	Select from COMP2129: Operating Systems and Machine Principles Note: This unit is discontinued from 2018. Replacement unit is COMP2017.
Software Core	6	Select from MATH2069: Discrete Mathematics and Graph Theory
Project Management Core	6	Select from BUSS1040: Economics for Business Decision Making

Note: Up to 12 credit points of general electives may be taken.

Year 2 - Semester 2

Type	CP	CP From
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2
Software Core	6	Select from COMP2007: Algorithms and Complexity Note: This unit is discontinued from 2018. Replacement unit is COMP3027.
Software Core	6	Select from INFO2110: Systems Analysis and Modelling Note: This unit is discontinued from 2018. Replacement unit is ISYS2110.
Project Management Core	6	Select from ENGG2855: Project Acceptance
Project Management Core	6	Select from ENGG2852: Project Based Organisational Behaviour [not offered in 2020] Note: This unit is discontinued from 2019. Replacement unit is PMGT2854.

Note: Up to 12 credit points of general electives may be taken.

ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.

Year 3 - Semester 1

Type	CP	CP From
Software Core	6	Select from INFO3402: Management of IT Projects and Systems Note: This unit is discontinued from 2018. Replacement unit is INFO3333.
Software Specialist - Electives	6	Select from Unit Block: Software Specialist - Electives
Project Management Core	6	Select from ENGG2851: Project Analytics
Project Management Core	6	Select from ENGG2850: Project Cost and Finance

Note: At least 6 CP of software specialist electives must be taken (to complete the 108 CP for the software degree), this may be taken in either semester.

Year 3 - Semester 2

Type	CP	CP From
Software Core	6	Select from INFO2315: Introduction to IT Security Note: This unit is discontinued from 2018. Replacement unit is INFO3616.
Project Management Core	6	Select from ENGG3854: Legal Aspects of Projects
Project Management Core	6	Select from PMGT3855: Project Variance Analysis
Project Management Electives	6	Select from Unit Block: Project Management Electives

Year 4 - Semester 1

Type	CP	CP From
Software Core	6	Select from INFO3220: Object Oriented Design Note: This unit is not available to Software students from 2018. Replacement unit is SOFT3202.
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3
Software Specialist - Electives	6	Select from Unit Block: Software Specialist - Electives
Project Management Electives	6	Select from PMGT3856: Sustainability and Knowledge Management
Project Management Core	6	Select from ENGG3853: Project Risk Management: Tools & Techniques

Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.

Year 4 - Semester 2

Type	CP	CP From
Software Core	6	Select from COMP3615: Computer Science Project Note: This unit is not available to Software students from 2018. Replacement unit is SOFT3413.
Software Core	6	Select from INFO3315: Human-Computer Interaction
Software Core	6	Select from ELEC3609: Internet Software Platforms
Project Management Electives	6	Select from PMGT3857: International Project Management

Year 5 - Semester 1

Type	CP	CP From
Engineering Core	0	Select from ENGG4000: Practical Experience
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4
Engineering Core	6	Select from ELEC4712: Thesis A
Software Core	6	Select from ELEC5618: Software Quality Engineering
Software Core	6	Select from COMP5348: Enterprise Scale Software Architecture
Project Management Core	6	Select from PMGT3858: Adapting to Project Context

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.

Year 5 - Semester 2

Type	CP	CP From
Software Core	6	Select from ELEC5619: Object Oriented Application Frameworks
Engineering Core	6	Select from ELEC4713: Thesis B
Software Specialist - Electives	6	Select from Unit Block: Software Specialist - Electives

Note: Students can replace ELEC4712 and ELEC4713 with INFO4991 and INFO4992 IT Research Thesis, subject to the approval of the Coursework Director of Electrical and Information Engineering.

4. Pathways

No streams/majors defined for this course version.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AERO2711	Aerospace Engineering Project 1	6	Semester 1 Semester 2 Int February Int July
AERO3711	Aerospace Engineering Project 2	6	Semester 1 Semester 2 Int February Int July
AERO4711	Aerospace Engineering Project 3	6	Semester 1 Semester 2 Int February Int July
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1061	Advanced Engineering 1	6	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2062	Engineering Project: Business Plan 2 Adv	6	Semester 2
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3062	Technology Education (Advanced)	6	Semester 2
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4000	Practical Experience	0	Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
ENGG4064	Advanced Engineering Design A	6	Semester 2 Int July
ENGG4065	Advanced Engineering Design B	6	Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
MATH1001	Differential Calculus	3	Semester 1 Summer Main
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1003	Integral Calculus and Modelling	3	Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1901	Differential Calculus (Advanced)	3	Semester 1
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1903	Integral Calculus and Modelling Advanced	3	Semester 2
MATH1905	Statistics (Advanced)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGG4000 Practical Experience (0cp)

- Exactly 6cp from ENGG1111 Integrated Engineering 1 (6cp) OR ENGG1061 Advanced Engineering 1A (6cp) (see note 1)

- At least 2cp from ENGG2xxx Integrated Engineering 2 (2cp) OR AERO2711 Aerospace Engineering Project 1 (see note 1)

- At least 2cp from ENGG3xxx Integrated Engineering 3 (2cp) OR ENGG3062 Technology Education (Advanced) (6cp) (see note 1) OR AERO3711 Advanced Aerospace Project 2 (see note 1)

- At least 2cp from ENGG4xxx Integrated Engineering 4 (2cp) OR ENGG4064 Advanced Engineering Design A (6cp) (see note 1) OR ENGG4065 Advanced Engineering Design B (6cp) (see note 1) OR AERO4711 Advanced Aerospace Project 3 (see note 1)

- Exactly 12cp of MATH1xxxx units: MATH1001 Differential Calculus (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1003 Integral Calculus AND Modelling (3cp) MATH1005 Statistics (3cp)

- A minimum of 12cp (see note 2) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. The Advanced Engineering units are only available to students who have been accepted into the relevant year of the Advanced Engineering program.

Note 2. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Software Core (Min CP: 102,Max CP: 102)

Unit Code	Unit Name	CP	Sessions Offered
COMP2007	Algorithms and Complexity	6	Semester 2
COMP2017	Systems Programming	6	Semester 1
COMP2123	Data Structures & Algorithms	6	Semester 1 Semester 2
COMP2129	Operating Systems and Machine Principles	6	Semester 1
COMP3027	Algorithm Design	6	Semester 1
COMP3615	Computer Science Project	6	Semester 2
COMP5348	Enterprise Scale Software Architecture	6	Semester 2
ELEC1601	Introduction to Computer Systems	6	Semester 1 Semester 2
ELEC3609	Internet Software Platforms	6	Semester 2
ELEC5618	Software Quality Engineering	6	Semester 1
ELEC5619	Object Oriented Application Frameworks	6	Semester 2
INFO1103	Introduction to Programming	6	Semester 1 Semester 2
INFO1105	Data Structures	6	Semester 2 Summer Early Summer Main
INFO1113	Object-Oriented Programming	6	Semester 1 Semester 2
INFO2110	Systems Analysis and Modelling	6	Semester 2
INFO2120	Database Systems 1	6	Semester 1
INFO2315	Introduction to IT Security	6	Semester 2
INFO3220	Object Oriented Design	6	Semester 1
INFO3315	Human-Computer Interaction	6	Semester 2
INFO3333	Computing 3 Management	6	Semester 1 Semester 2
INFO3402	Management of IT Projects and Systems	6	Semester 1
INFO3616	Principles of Security and Security Engineering	6	Semester 2
ISYS2110	Analysis & Design of Web Information Systems	6	Semester 1
ISYS2120	Data & Information Management	6	Semester 2
MATH2069	Discrete Mathematics and Graph Theory	6	Semester 1
SOFT3202	Software Construction and Design 2	6	Semester 1
SOFT3413	Software Development Project [not offered in 2020]	6	Semester 2

Note: Complete all 17 units of study (102 credit points) from this table.

From 2018, a number of Software core units have been discontinued. The replacement units have been included in this unit block, and in the CUSP structure. Please refer to the notes in the structure to find the appropriate unit substitute.

Block 3 - Project Management Core (Min CP: 66,Max CP: 66)

Unit Code	Unit Name	CP	Sessions Offered
BUSS1040	Economics for Business Decision Making	6	Semester 1 Semester 2
ENGG1850	Introduction to Project Management	6	Semester 1
ENGG2850	Project Cost and Finance	6	Semester 1
ENGG2851	Project Analytics	6	Semester 1
ENGG2852	Project Based Organisational Behaviour [not offered in 2020]	6	Semester 2
ENGG2855	Project Acceptance	6	Semester 1
ENGG3853	Project Risk Management: Tools & Techniques	6	Semester 1
ENGG3854	Legal Aspects of Projects	6	Semester 1 Semester 2
PMGT3855	Project Variance Analysis	6	Semester 2
PMGT3858	Adapting to Project Context	6	Semester 1
PSYC1002	Psychology 1002	6	Semester 2 Summer Main

Block 4 - Software Specialist - Electives (Min CP: 18,Max CP: 54)

Unit Code	Unit Name	CP	Sessions Offered
COMP3109	Programming Languages and Paradigms	6	Semester 2
COMP3308	Introduction to Artificial Intelligence	6	Semester 1
COMP3419	Graphics and Multimedia	6	Semester 2
COMP3456	Computational Methods for Life Sciences	6
COMP3520	Operating Systems Internals	6	Semester 2
COMP3608	Introduction to Artificial Intelligence (Adv)	6	Semester 1
COMP5045	Computational Geometry	6	Semester 1
COMP5047	Pervasive Computing	6	Semester 2
COMP5048	Visual Analytics	6	Semester 1 Semester 2
COMP5116	Design of Networks & Distributed Systems	6	Semester 2
COMP5206	Information Technologies and Systems	6	Semester 1
COMP5213	Computer and Network Organisation	6	Semester 1
COMP5318	Machine Learning and Data Mining	6	Semester 1 Semester 2
COMP5338	Advanced Data Models	6	Semester 2
COMP5415	Multimedia Design and Authoring	6	Semester 2
COMP5416	Advanced Network Technologies	6	Semester 2
COMP5424	Information Technology in Biomedicine	6	Semester 1
COMP5425	Multimedia Retrieval	6	Semester 1
COMP5426	Parallel and Distributed Computing	6	Semester 1
ELEC3104	Engineering Electromagnetics	6	Semester 1
ELEC3203	Electricity Networks	6	Semester 1
ELEC3204	Power Electronics and Applications	6	Semester 1
ELEC3206	Electrical Energy Conversion Systems	6	Semester 2
ELEC3304	Control	6	Semester 2
ELEC3305	Digital Signal Processing	6	Semester 1
ELEC3404	Electronic Circuit Design	6	Semester 1
ELEC3405	Communications Electronics and Photonics	6	Semester 2
ELEC3505	Communications	6	Semester 1
ELEC3506	Communications Networks	6	Semester 2
ELEC3607	Embedded Systems	6	Semester 1
ELEC3608	Computer Architecture	6	Semester 2
ELEC3610	E-Business Analysis and Design	6	Semester 1
ELEC3702	Management for Engineers	6	Semester 2
ELEC3802	Fundamentals of Biomedical Engineering	6	Semester 1
ELEC3803	Bioelectronics [not offered in 2021]	6	Semester 2
ELEC4505	Digital Communication Systems	6	Semester 1
ELEC4706	Project Management	6	Semester 1
ELEC5101	Antennas and Propagation	6	Semester 2
ELEC5203	Topics in Power Engineering [not offered in 2021]	6	Semester 2
ELEC5204	Power Systems Analysis and Protection	6	Semester 1
ELEC5205	High Voltage Engineering	6	Semester 2
ELEC5206	Sustainable Energy Systems	6	Semester 2
ELEC5207	Advanced Power Conversion Technologies	6	Semester 2
ELEC5208	Intelligent Electricity Networks	6	Semester 1
ELEC5211	Power System Dynamics and Control	6	Semester 1
ELEC5212	Power System Planning and Markets	6	Semester 2
ELEC5303	Computer Control System Design [not Offered 2021]	6	Semester 1
ELEC5402	Digital Integrated Circuit Design	6
ELEC5403	Radio Frequency Engineering [not offered in 2021]	6	Semester 1
ELEC5507	Error Control Coding	6	Semester 1
ELEC5508	Wireless Engineering	6	Semester 2
ELEC5509	Mobile Networks	6	Semester 1
ELEC5510	Satellite Communication Systems	6	Semester 2
ELEC5511	Optical Communication Systems	6	Semester 1
ELEC5512	Optical Networks	6	Semester 2
ELEC5514	IoT Wireless Sensing and Networking	6	Semester 2
ELEC5516	Electrical and Optical Sensor Design	6	Semester 1
ELEC5614	Real Time Computing	6	Semester 1
ELEC5615	Advanced Computer Architecture	6	Semester 1
ELEC5616	Computer and Network Security	6	Semester 1
ELEC5617	Topics in Software Engineering	6	Semester 2
ELEC5620	Model Based Software Engineering	6	Semester 2
ELEC5621	Digital Systems Design	6
ELEC5622	Signals, Software and Health	6	Semester 2
ELEC5701	Technology Venture Creation [not offered in 2021]	6	Semester 2
ELEC5803	Advanced Bioelectronics [Not Offered 2019]	6	Semester 1
ENGG3800	Industry and Community Projects	6	Semester 1 Semester 2 Int February Int July Int August Int October
INFO3404	Database Systems 2	6	Semester 1 Semester 2
INFO3504	Database Systems 2 (Adv)	6	Semester 2
INFO3551	Information Technology Exchange	6	Semester 1 Semester 2 Int January Int July
INFO5301	Information Security Management	6	Semester 1 Semester 2
INFO5990	Professional Practice in IT	6	Semester 1 Semester 2
INFO5991	Services Science Management and Engineering	6	Semester 2
INFO5992	Understanding IT Innovations	6	Semester 1 Semester 2
INFO5993	IT Research Methods	6	Semester 1 Semester 2
INFO6007	Project Management in IT	6	Semester 1 Semester 2

Note: At least 18cp are required from Software Specialist - Electives block.

Block 5 - Software Specialist - Senior (Max CP: 54)

Unit Code	Unit Name	CP	Sessions Offered
COMP5045	Computational Geometry	6	Semester 1
COMP5047	Pervasive Computing	6	Semester 2
COMP5048	Visual Analytics	6	Semester 1 Semester 2
COMP5116	Design of Networks & Distributed Systems	6	Semester 2
COMP5206	Information Technologies and Systems	6	Semester 1
COMP5213	Computer and Network Organisation	6	Semester 1
COMP5318	Machine Learning and Data Mining	6	Semester 1 Semester 2
COMP5338	Advanced Data Models	6	Semester 2
COMP5415	Multimedia Design and Authoring	6	Semester 2
COMP5416	Advanced Network Technologies	6	Semester 2
COMP5424	Information Technology in Biomedicine	6	Semester 1
COMP5425	Multimedia Retrieval	6	Semester 1
COMP5426	Parallel and Distributed Computing	6	Semester 1
ELEC4505	Digital Communication Systems	6	Semester 1
ELEC4706	Project Management	6	Semester 1
ELEC5101	Antennas and Propagation	6	Semester 2
ELEC5203	Topics in Power Engineering [not offered in 2021]	6	Semester 2
ELEC5204	Power Systems Analysis and Protection	6	Semester 1
ELEC5205	High Voltage Engineering	6	Semester 2
ELEC5206	Sustainable Energy Systems	6	Semester 2
ELEC5207	Advanced Power Conversion Technologies	6	Semester 2
ELEC5208	Intelligent Electricity Networks	6	Semester 1
ELEC5211	Power System Dynamics and Control	6	Semester 1
ELEC5212	Power System Planning and Markets	6	Semester 2
ELEC5303	Computer Control System Design [not Offered 2021]	6	Semester 1
ELEC5402	Digital Integrated Circuit Design	6
ELEC5403	Radio Frequency Engineering [not offered in 2021]	6	Semester 1
ELEC5507	Error Control Coding	6	Semester 1
ELEC5508	Wireless Engineering	6	Semester 2
ELEC5509	Mobile Networks	6	Semester 1
ELEC5510	Satellite Communication Systems	6	Semester 2
ELEC5511	Optical Communication Systems	6	Semester 1
ELEC5512	Optical Networks	6	Semester 2
ELEC5514	IoT Wireless Sensing and Networking	6	Semester 2
ELEC5516	Electrical and Optical Sensor Design	6	Semester 1
ELEC5614	Real Time Computing	6	Semester 1
ELEC5615	Advanced Computer Architecture	6	Semester 1
ELEC5616	Computer and Network Security	6	Semester 1
ELEC5617	Topics in Software Engineering	6	Semester 2
ELEC5620	Model Based Software Engineering	6	Semester 2
ELEC5621	Digital Systems Design	6
ELEC5622	Signals, Software and Health	6	Semester 2
ELEC5701	Technology Venture Creation [not offered in 2021]	6	Semester 2
ELEC5803	Advanced Bioelectronics [Not Offered 2019]	6	Semester 1
INFO5301	Information Security Management	6	Semester 1 Semester 2
INFO5990	Professional Practice in IT	6	Semester 1 Semester 2
INFO5991	Services Science Management and Engineering	6	Semester 2
INFO5992	Understanding IT Innovations	6	Semester 1 Semester 2
INFO5993	IT Research Methods	6	Semester 1 Semester 2
INFO6007	Project Management in IT	6	Semester 1 Semester 2

Note: At least 18cp are required from Software Specialist - Junior/Senior blocks. 3rd Year Electives, it is recommended to take at least 2 units from here, and 3 from Junior. Not generally available to combined degrees

Block 6 - Project Management Electives (Min CP: 18,Max CP: 18)

Unit Code	Unit Name	CP	Sessions Offered
PMGT2854	Executing Projects	6	Semester 2
PMGT3856	Sustainability and Knowledge Management	6	Semester 1
PMGT3857	International Project Management	6	Semester 2

Note: Select one of these

Course:	Software / Project Management (2016)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2018, 2017, 2016, 2015

Faculty of Engineering

Software / Project Management (2016)

1. Overview