Faculty of Engineering |
Course: | Mechatronic / Science (2016) |
CP Required: | 240 |
Min FT Duration: | 5.00 Years |
Min PT Duration: | 5.00 Years |
Faculty/School: | Faculty of Engineering |
Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
Type | CP | CP From |
3 |
Select from
MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
|
6 |
Select from
ENGG1801: Engineering Computing Note: INFO1103 is an acceptable alternative for combined degree students wishing to major in Computer Science. |
|
6 |
Select from
Unit Block: Selected Junior Science Units Note: Science/Engineering(Hons) combined degrees require 240 credit points, comprising 96 credit points from Science subject areas, with a major in one Science discipline, plus units prescribed for the Engineering specialisation. Science units forming part of core requirements in the Mechatronic Engineering specialisation may be counted as part of the 96 credit point Science requirement. Consult resolutions for Combined Engineering(Hons) /Science degree in Faculty handbooks for further details. |
|
6 |
Select from
MTRX1701: Introduction to Mechatronic Engineering |
|
3 |
Select from
MATH1002: Linear Algebra |
Note:
In the BE/BSc program the 12 cp of core subjects, MATH#### may count to both the Science and the Engineering degrees. For all subjects which fall in this category the student must fulfill credit point requirements of the combined degree by completing additional Mechatronic electives and/or Science subjects.
MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.
Type | CP | CP From |
3 |
Select from
MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
|
6 |
Select from
Unit Block: Selected Junior Science Units |
|
3 |
Select from
MATH1005: Statistical Thinking with Data |
|
6 |
Select from
ENGG1802: Engineering Mechanics |
|
6 |
Select from
AMME1362: Introduction to Engineering Materials |
Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.
Type | CP | CP From |
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units |
6 |
Select from
AMME2500: Engineering Dynamics |
|
6 |
Select from
MTRX1705: Introduction to Mechatronic Design |
|
6 |
Select from
ELEC1103: Fundamentals of Electrical and Electronic Engineering |
Type | CP | CP From |
List
|
12 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units |
6 |
Select from
MTRX1702: Mechatronics 1 |
|
6 |
Select from
ENGG1111: Integrated Engineering 1 |
Note:
ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
List
|
18 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
6 |
Select from
MTRX2700: Mechatronics 2 |
Type | CP | CP From |
2 |
Select from
ENGG2111: Integrated Engineering 2 |
|
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
6 |
Select from
MECH2400: Mechanical Systems Design 1 |
|
6 |
Select from
ELEC2104: Electronic Devices and Circuits |
|
6 |
Select from
AMME2301: Mechanics of Solids |
Note:
ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
2 |
Select from
ENGG3111: Integrated Engineering 3 |
|
6 |
Select from
MECH3660: Manufacturing Engineering |
|
6 |
Select from
ELEC3204: Power Electronics and Applications |
|
6 |
Select from
AMME3500: System Dynamics and Control |
Note:
ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
List
|
6 |
Select from
Unit Blocks: Selected Junior Science Units Selected Intermediate Science Units Selected Senior Science Units |
6 |
Select from
MTRX3760: Mechatronic Systems Design |
|
6 |
Select from
MTRX3700: Mechatronics 3 |
|
6 |
Select from
MECH3460: Mechanical Systems Design 2 |
Type | CP | CP From |
2 |
Select from
ENGG4111: Integrated Engineering 4 |
|
6 |
Select from
Unit Block: Mechatronic Specialist Electives Note: At leat 12 credit points of Mechatronics Elective units must be completed. These can be taken in either semester. |
|
List
|
12 |
Select from
Unit Blocks: Selected Intermediate Science Units Selected Senior Science Units |
0 |
Select from
ENGG4000: Practical Experience |
|
6 |
Select from
AMME4111: Thesis A |
Note:
ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.
Students in the Space major do not undertake Integrated Engineering units and should substitute a unit from their major.
Type | CP | CP From |
6 |
Select from
Unit Block: Mechatronic Specialist Electives Note: At least 12 credit points of Mechatronics Elective units must be completed. These may be taken in either semester. |
|
List
|
6 |
Select from
Unit Blocks: Selected Intermediate Science Units Selected Senior Science Units |
6 |
Select from
AMME4112: Thesis B |
Type | CP | CP From |
Note:
From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.
You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors
Type | CP | CP From |
Core
|
6 |
AERO2705: Space Engineering 1 Note: Replacing ENGG1111 |
Core
|
6 |
AERO3760: Space Engineering 2 Note: Replacing MECH3460 |
Core
|
6 |
AERO4701: Space Engineering 3 |
6 |
Select from
Unit Block Space Specialist Electives |
Note:
The 24 cp of units of study from the above table are required to be eligible for the Space Engineering major. Entry requirements ATAR or WAM>75% must be met to be enrolled in this major.
Students undertaking this major are not required to do Integrated Engineering units (ENGG1111, ENGG2111, ENGG3111, ENGG4111)
Unit Code | Unit Name | CP | Sessions Offered |
AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2 |
AMME4790 | Introduction to Biomechatronics | 6 |
Semester 2 |
AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1 |
MECH5720 | Sensors and Signals | 6 |
Semester 2 |
MTRX5700 | Experimental Robotics | 6 |
Semester 1 |
Note: AMME4790 has been replaced by AMME5790 from 2017
Note: This information is correct as of 2016. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note: This information is correct as of 2016. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Note:
A total of 96 credits of Science or IT subject units, including a Science major sequence, must be completed as part of the combined Engineering/Science degree. Science units forming part of core requirements in the chosen engineering specialisation may be counted as part of the 96 credit point Science requirements. Consult resolutions for Combined Engineering /Science degree in Faculty handbooks for further details.
This information is correct as of 2016. Since then, other faculties have undergone substantial curriculum changes and, as such, some of this unit/major information may be outdated. Please contact the relevant faculty and review the faculty handbook for more up-to-date information about units, majors and transitional arrangements.
Unit Code | Unit Name | CP | Sessions Offered |
AERO5700 | Space Engineering (Advanced) | 6 |
Semester 1 Semester 2 |
AMME4710 | Computer Vision and Image Processing | 6 |
Semester 2 |
AMME4790 | Introduction to Biomechatronics | 6 |
Semester 2 |
AMME5520 | Advanced Control and Optimisation | 6 |
Semester 1 |
MECH5720 | Sensors and Signals | 6 |
Semester 2 |
MTRX5700 | Experimental Robotics | 6 |
Semester 1 |
Note: AMME4790 has been replaced by AMME5790 from 2017
Unit Code | Unit Name | CP | Sessions Offered |
AMME4111 | Thesis A | 6 |
Semester 1 Semester 2 |
AMME4112 | Thesis B | 6 |
Semester 1 Semester 2 |
ENGG1111 | Integrated Engineering 1 | 6 |
Semester 1 |
ENGG2111 | Integrated Engineering 2 | 2 |
Semester 1 Semester 2 Int February |
ENGG3111 | Integrated Engineering 3 | 2 |
Semester 1 Semester 2 |
ENGG4000 | Practical Experience | 0 |
Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December |
ENGG4111 | Integrated Engineering 4 | 2 |
Semester 1 |
MATH1001 | Differential Calculus | 3 |
Semester 1 Summer Main |
MATH1002 | Linear Algebra | 3 |
Semester 1 Semester 2 Summer Main |
MATH1003 | Integral Calculus and Modelling | 3 |
Semester 2 Summer Main |
MATH1005 | Statistical Thinking with Data | 3 |
Semester 1 Semester 2 Int January |
Unit Code | Unit Name | CP | Sessions Offered |
AMME1362 | Introduction to Engineering Materials | 6 |
Semester 2 |
AMME2301 | Mechanics of Solids | 6 |
Semester 2 |
AMME2500 | Engineering Dynamics | 6 |
Semester 1 |
AMME3500 | System Dynamics and Control | 6 |
Semester 1 |
ELEC1103 | Fundamentals of Electrical and Electronic Engineering | 6 |
Semester 1 |
ELEC2104 | Electronic Devices and Circuits | 6 |
Semester 2 |
ELEC3204 | Power Electronics and Applications | 6 |
Semester 1 |
ENGG1801 | Engineering Computing | 6 |
Semester 1 Int January |
ENGG1802 | Engineering Mechanics | 6 |
Semester 2 Summer Main Int January |
MECH2400 | Mechanical Systems Design 1 | 6 |
Semester 1 |
MECH3460 | Mechanical Systems Design 2 | 6 |
Semester 2 |
MECH3660 | Manufacturing Engineering | 6 |
Semester 1 |
MTRX1701 | Introduction to Mechatronic Engineering | 6 |
Semester 1 |
MTRX1702 | Mechatronics 1 | 6 |
Semester 2 |
MTRX1705 | Introduction to Mechatronic Design | 6 |
Semester 2 |
MTRX2700 | Mechatronics 2 | 6 |
Semester 1 |
MTRX3700 | Mechatronics 3 | 6 |
Semester 2 |
MTRX3760 | Mechatronic Systems Design | 6 |
Semester 2 |