Note: This course version is currently under review and is subject to change.

ProgramsEngENGI (UG)BEHons CombinedBE/BScBE/BScS1 EntryElectrical / Science (2020)


Show information forcommencing students (ie. started First Year then).
 
Faculty of Engineeringengineering.undergraduate@sydney.edu.au


Print View | Download as PDF Administrative Information (Fees, ATAR etc.)

Select plan for Major/Pathway

Year 1 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6PHYS1001: Physics 1 (Regular)
3MATH1021: Calculus of One Variable
6ENGG1111: Integrated Engineering 1
6Science
3MATH1002: Linear Algebra
0ENGP1000: Professional Engagement Program 1


Note:  All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note:   From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024


Year 1 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6PHYS1003: Physics 1 (Technological)
3MATH1023: Multivariable Calculus and Modelling
3MATH1005: Statistical Thinking with Data
6ELEC1601: Introduction to Computer Systems
6Science

Note:   From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024


Year 2 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6INFO1110: Introduction to Programming
6MATH2061: Linear Mathematics and Vector Calculus
6Science
6ELEC1103: Fundamentals of Electrical and Electronic Engineering


Note:  From 2024, ELEC2100 replaces ELEC1103. Students who have not yet completed ELEC1103 should enrol in ELEC2100.

Year 2 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
12Select from
Science
6ELEC2104: Electronic Devices and Circuits
6ELEC2103: Simulation and Numerical Solutions in Engineering
2ENGG2111: Integrated Engineering 2


Note:  Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.
0ENGP2000: Professional Engagement Program 2


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note:   Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. Students may take this unit in the final semester or may swap with an elective to take it earlier.

https://canvas.sydney.edu.au/courses/2806/pages/feit-changes-to-the-bachelor-of-engineering-honours-degree-how-they-affect-you


Year 3 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6COMP2123: Data Structures & Algorithms
6Electrical Specialist - Electives
6ELEC2602: Digital Logic
6Science

Year 3 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6ELEC2302: Signals and Systems
6PHYS2213: Physics 2EE
6Science
6Science

Year 4 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Electrical Specialist - Electives
6Electrical Specialist - Electives
6Science
6Science
2ENGG3111: Integrated Engineering 3


Note:  Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.

Year 4 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
6Electrical Specialist - Electives
6Electrical Specialist - Electives
6Science
6Science

Year 5 - Semester 1

SITS Diet Block/TypeCPUnit of Study/Unit Block
List
12Select from
Electrical Specialist - Electives
Science


Note:  As there are 24cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 24cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6ELEC4712: Thesis A
6Electrical Specialist - Electives
0ENGP3000: Professional Engagement Program 3


Note:  New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 5 - Semester 2

SITS Diet Block/TypeCPUnit of Study/Unit Block
List
12Select from
Electrical Specialist - Electives
Science


Note:  As there are 24cp worth of units that can count to either the Engineering or Science requirements of the combined degree, students can choose to select up to 24cp of electives from either Engineering or Science, or a combination of both.

Students must be sure they will complete the requirements of the Science side of the degree if they want to choose any Engineering elective units.
6ELEC4713: Thesis B
2ENGG4111: Integrated Engineering 4


Note:  Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. ENGG3112 can be taken in this semester, or earlier by switching an elective.

Additional Requirements for Major

TypeCPCP From
12Select from
ELEC2104: Electronic Devices and Circuits
ELEC2602: Digital Logic
30Select from
ELEC3506: Communications Networks
ELEC5509: Mobile Networks
ELEC5514: IoT Wireless Sensing and Networking
ELEC5517: Software Defined Networks
ELEC5518: IoT for Critical Infrastructures
6Select from
ELEC5208: Intelligent Electricity Networks
ELEC5508: Wireless Engineering
ELEC5616: Computer and Network Security
ELEC5760: Intelligent Networked Control


Note:You may also select from COMP5047 Pervasive Computing, COMP5216 Mobile Computing or COMP5426 Parallel and Distributed Computing

Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.
Course: Electrical / Science (2020)
CP Required: 240
Min FT Duration: 5.00 Years
Min PT Duration: N/A
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015
Requirements: Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units (12cp of MATH1* can count towards Science requirements)

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 72 credit points of Electrical Stream core units

► 36 credit points of Electrical Specialist elective units

► Up to 12 credit points of additional Electrical Specialist elective units

Science (96 credit points):

► *12 credit points of Science degree core units (12cp of MATH1XXX can count towards Engineering requirements)

► *48 credit points of Table A major

► 12 credit points of OLE units

► 24 credit points of electives from Science Table A or Table S

* The Science degree core units comprise 12 cp of MATH1xxx units and 12cp of 1000-level units from Table A. The 1000-level units from the Table A major count towards Science degree core requirement.

The handbook rules governing this degree are as follows:

To qualify for the award of the combined degree:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Science

For the Bachelor of Science component of a combined degree:

(a) The units of study that may be taken are set out in Table A of the Faculty of Science, and Table S and Table O of the Shared Pool for Undergraduate Degrees.

(b) Candidates must complete 96 credit points in the Bachelor of Science including:

(i) any required degree core units as set out in Table A of the Faculty of Science; and

(ii) a major (48 credit points) or a 3-year program with an embedded major from Table A of the Faculty of Science; and

(iii) 12 credit points of units of study in the Open Learning Environment as listed in Table O; and

(iv) where appropriate, additional electives from Table A of the Faculty of Science or Table S;

(v) If enrolled in a stream, complete the requirements for the stream as specified in Table A of the Faculty of Science.

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/
Report Type: