1. Overview

Course:	Electrical / Project Management 2019+ (2020)
CP Required:	240
Min FT Duration:	5.00 Years
Min PT Duration:	N/A
Faculty/School:	Faculty of Engineering
Years Offered:	2025, 2024, 2023, 2022, 2021, 2020, 2019

2. Requirements

Summary

In summary the requirements are:

Students must complete 240 credit points as follows:

Engineering (144 credit points):

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 72 credit points of Electrical stream core units

► 36 credit points of Electrical Specialist elective units

Project Management:

► 84 credit points of Project Management core units

Electives:

► 12 credit points chosen from Project Management elective units or Electrical Specialist elective units

The handbook rules governing this degree are as follows:

(a) For all Bachelor of Engineering combined degrees a candidate must complete 240 credit points and satisfy any additional requirements specified.

(b) Where the requirements specified in the following clauses account for less than the total required credit, candidates must complete additional units of study from the tables relevant to the Bachelor of Engineering as may be necessary to satisfy the requirements of the degree.

To qualify for the award of the combined degree:

Requirements for the Bachelor of Engineering Honours

(a) The units of study that may be taken for the Bachelor of Engineering Honours component of the combined degree are set out in the tables of units of study for the Bachelor of Engineering Honours single degree;

(b) Except where varied by other clauses of these resolutions, all candidates must complete a minimum of 144 credit points comprising:

(i) 36 credit points from the Engineering Core Table, including all required units;

(ii) 108 credit points from the Engineering Stream Core Table pertaining to the specialist stream being undertaken, including all required units;

(c) The Faculty Board may approve, based on appropriate academic justification, a list of approved unit alternatives. These alternatives specify, for particular Engineering stream / combined degree combinations, units within the normal requirements for the Bachelor of Engineering Honours component of the combined degree that can be replaced by specified alternative units that would form part of the normal program for single degree students in that stream.

Requirements for the Bachelor of Project Management

For the Bachelor of Project Management component of a combined degree:

(a) Candidates must complete 96 credit points comprising:

(i) 84 credit points of core units as set out in the Bachelor of Project Management Unit of Study Table

(ii) 12 credit points of electives from either the elective units set out in the Bachelor of Project Management Unit of Study Table, or from the Stream Electives in the candidate's Bachelor of Engineering Honours Stream

Dalyell Scholars Program

Students in the Dalyell Scholars program can review the Dalyell Canvas page for information on fitting the program into their degree:

https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 1

Type	CP	CP From
Engineering Core	3	Select from MATH1002: Linear Algebra
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Engineering Core	3	Select from MATH1021: Calculus of One Variable
Electrical Stream Core	6	Select from PHYS1001: Physics 1 (Regular)
Project Management Core	6	Select from ENGG1850: Introduction to Project Management
Engineering Core	0	Select from ENGP1000: Professional Engagement Program 1 Note: All students must enrol in ENGP1000 in their first semester of enrolment. New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: From 2024, 3cp Math units are replaced by new 6cp units MATH1061 and MATH1062. Students who have not yet completed all 3cp Math units can use this interactive tool on Canvas for enrolment advice: https://canvas.sydney.edu.au/courses/2806/pages/mathematics-changes-in-2024

Year 1 - Semester 2

Type	CP	CP From
Project Management Core	6	Select from PMGT1852: Facilitation and Stakeholder Engagement
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data
Engineering Core	3	Select from MATH1023: Multivariable Calculus and Modelling
Electrical Stream Core	6	Select from INFO1110: Introduction to Programming
Electrical Stream Core	6	Select from PHYS1003: Physics 1 (Technological)

Year 2 - Semester 1

Type	CP	CP From
Project Management Core	6	Select from ENGG1863: Effective Project Communication
Electrical Stream Core	6	Select from COMP2123: Data Structures & Algorithms
Electrical Stream Core	6	Select from MATH2061: Linear Mathematics and Vector Calculus
Electrical Stream Core	6	Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering Note: From 2024, ELEC2100 replaces ELEC1103. Students who have not yet completed ELEC1103 should enrol in ELEC2100.

Year 2 - Semester 2

Type	CP	CP From
Project Management Core	6	Select from ENGG1865: Project Time, Cost and Resources
Electrical Stream Core	6	Select from ELEC2302: Signals and Systems
Electrical Stream Core	6	Select from ELEC1601: Introduction to Computer Systems
Electrical Stream Core	6	Select from ELEC2103: Simulation and Numerical Solutions in Engineering
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2 Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.

Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. Students may take this unit in the final semester or may swap with an elective to take it earlier.

https://canvas.sydney.edu.au/courses/2806/pages/feit-changes-to-the-bachelor-of-engineering-honours-degree-how-they-affect-you

Year 3 - Semester 1

Type	CP	CP From
Electrical Specialist Electives	6	Select from Unit Block: Electrical Specialist Electives
Project Management Core	6	Select from PMGT2711: Critical Thinking for Projects
Project Management Core	6	Select from ENGG1860: Project Initiation & Scope
Electrical Stream Core	6	Select from ELEC2602: Digital Logic
Engineering Core	0	Select from ENGP2000: Professional Engagement Program 2 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 2

Type	CP	CP From
Project Management Core	6	Select from PMGT2821: Project Conflict Management
Project Management Core	6	Select from PMGT1711: Systems Thinking in Projects
Electrical Stream Core	6	Select from PHYS2213: Physics 2EE
Electrical Stream Core	6	Select from ELEC2104: Electronic Devices and Circuits

Year 4 - Semester 1

Type	CP	CP From
Electrical Specialist Electives	6	Select from Unit Block: Electrical Specialist Electives
Electrical Specialist Electives	6	Select from Unit Block: Electrical Specialist Electives
Project Management Core	6	Select from ENGG2855: Project Acceptance
Project Management Core	6	Select from ENGG2851: Project Analytics
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3 Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111.

Year 4 - Semester 2

Type	CP	CP From
Electrical Specialist Electives	6	Select from Unit Block: Electrical Specialist Electives
Electrical Specialist Electives	6	Select from Unit Block: Electrical Specialist Electives
Project Management Core	6	Select from PMGT2822: Reframing Projects
Project Management Core	6	Select from PMGT2854: Executing Projects
Engineering Core	0	Select from ENGP3000: Professional Engagement Program 3 Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 5 - Semester 1

Type	CP	CP From
List	6	Select from Unit Blocks: Electrical Specialist Electives Project Management Electives
Engineering Core	6	Select from ELEC4712: Thesis A
Electrical Specialist Electives	6	Select from Unit Block: Electrical Specialist Electives
Project Management Core	6	Select from PMGT3858: Adapting to Project Context

Year 5 - Semester 2

Type	CP	CP From
List	6	Select from Unit Blocks: Electrical Specialist Electives Project Management Electives
Engineering Core	6	Select from ELEC4713: Thesis B
Project Management Core	6	Select from ENGG3854: Legal Aspects of Projects
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4 Note: Integrated Engineering units will be phased out from 2021. Students commencing in 2020 will take new unit ENGG3112 (6 cp) in place of ENGG2111, ENGG3111 and ENGG4111. ENGG3112 can be taken in this semester, or earlier by switching an elective.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4111	Integrated Engineering 4	2	Semester 1
ENGP1000	Professional Engagement Program 1	0	Semester 1 Semester 2
ENGP2000	Professional Engagement Program 2	0	Semester 1 Semester 2
ENGP3000	Professional Engagement Program 3	0	Semester 1 Semester 2
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.

Block 2 - Electrical Stream Core (Min CP: 72,Max CP: 72)

Unit Code	Unit Name	CP	Sessions Offered
COMP2123	Data Structures & Algorithms	6	Semester 1 Semester 2
ELEC1103	Fundamentals of Electrical and Electronic Engineering	6	Semester 1
ELEC1601	Introduction to Computer Systems	6	Semester 1 Semester 2
ELEC2103	Simulation and Numerical Solutions in Engineering	6	Semester 2
ELEC2104	Electronic Devices and Circuits	6	Semester 2
ELEC2302	Signals and Systems	6	Semester 2
ELEC2602	Digital Logic	6	Semester 1
INFO1110	Introduction to Programming	6	Semester 1 Semester 2
MATH2061	Linear Mathematics and Vector Calculus	6	Semester 1 Summer Main
PHYS1001	Physics 1 (Regular)	6	Semester 1
PHYS1003	Physics 1 (Technological)	6	Semester 2
PHYS2213	Physics 2EE	6	Semester 2

Block 3 - Project Management Core (Min CP: 84,Max CP: 84)

Unit Code	Unit Name	CP	Sessions Offered
ENGG1850	Introduction to Project Management	6	Semester 1
ENGG1860	Project Initiation & Scope	6	Semester 1
ENGG1863	Effective Project Communication	6	Semester 1
ENGG1865	Project Time, Cost and Resources	6	Semester 2
ENGG2851	Project Analytics	6	Semester 1
ENGG2855	Project Acceptance	6	Semester 1
ENGG3854	Legal Aspects of Projects	6	Semester 1 Semester 2
PMGT1711	Systems Thinking in Projects	6	Semester 2
PMGT1852	Facilitation and Stakeholder Engagement	6	Semester 2
PMGT2711	Critical Thinking for Projects	6	Semester 1
PMGT2821	Project Conflict Management	6	Semester 2
PMGT2822	Reframing Projects	6	Semester 2
PMGT2854	Executing Projects	6	Semester 2
PMGT3858	Adapting to Project Context	6	Semester 1

Note: In 2024, ENGG units will be re-coded to PMGT.

Block 4 - Electrical Specialist Electives (Min CP: 36,Max CP: 48)

Unit Code	Unit Name	CP	Sessions Offered
ELEC3104	Engineering Electromagnetics	6	Semester 1
ELEC3203	Electricity Networks	6	Semester 1
ELEC3204	Power Electronics and Applications	6	Semester 1
ELEC3206	Electrical Energy Conversion Systems	6	Semester 2
ELEC3304	Control	6	Semester 2
ELEC3305	Digital Signal Processing	6	Semester 1
ELEC3404	Electronic Circuit Design	6	Semester 1
ELEC3405	Communications Electronics and Photonics	6	Semester 2
ELEC3505	Communications	6	Semester 1
ELEC3506	Communications Networks	6	Semester 2
ELEC3607	Embedded Systems	6	Semester 1
ELEC3608	Computer Architecture	6	Semester 2
ELEC3609	Internet Software Platforms	6	Semester 2
ELEC3610	E-Business Analysis and Design	6	Semester 1
ELEC3612	Pattern Recognition and Machine Intelligence	6	Semester 1
ELEC3702	Management for Engineers	6	Semester 2
ELEC3802	Fundamentals of Biomedical Engineering	6	Semester 1
ELEC3803	Bioelectronics [not offered in 2021]	6	Semester 2
ELEC4505	Digital Communication Systems	6	Semester 1
ELEC4706	Project Management	6	Semester 1
ELEC5101	Antennas and Propagation	6	Semester 2
ELEC5203	Topics in Power Engineering [not offered in 2021]	6	Semester 2
ELEC5204	Power Systems Analysis and Protection	6	Semester 1
ELEC5205	High Voltage Engineering	6	Semester 2
ELEC5206	Sustainable Energy Systems	6	Semester 2
ELEC5207	Advanced Power Conversion Technologies	6	Semester 2
ELEC5208	Intelligent Electricity Networks	6	Semester 1
ELEC5211	Power System Dynamics and Control	6	Semester 1
ELEC5212	Power System Planning and Markets	6	Semester 2
ELEC5303	Computer Control System Design [not Offered 2021]	6	Semester 1
ELEC5304	Intelligent Visual Signal Understanding	6	Semester 1
ELEC5305	Acoustics, Speech and Signal Processing	6	Semester 2
ELEC5306	Video Intelligence and Compression	6	Semester 1
ELEC5307	Advanced Signal Processing with Deep Learning	6	Semester 2
ELEC5402	Digital Integrated Circuit Design	6
ELEC5403	Radio Frequency Engineering [not offered in 2021]	6	Semester 1
ELEC5405	Building Microchips: From Theory to Practice	6	Semester 1
ELEC5507	Error Control Coding	6	Semester 1
ELEC5508	Wireless Engineering	6	Semester 2
ELEC5509	Mobile Networks	6	Semester 1
ELEC5510	Satellite Communication Systems	6	Semester 2
ELEC5511	Optical Communication Systems	6	Semester 1
ELEC5512	Optical Networks	6	Semester 2
ELEC5514	IoT Wireless Sensing and Networking	6	Semester 2
ELEC5516	Electrical and Optical Sensor Design	6	Semester 1
ELEC5517	Software Defined Networks	6	Semester 2
ELEC5518	IoT for Critical Infrastructures	6	Semester 1
ELEC5614	Real Time Computing	6	Semester 1
ELEC5615	Advanced Computer Architecture	6	Semester 1
ELEC5616	Computer and Network Security	6	Semester 1
ELEC5617	Topics in Software Engineering	6	Semester 2
ELEC5618	Software Quality Engineering	6	Semester 1
ELEC5619	Object Oriented Application Frameworks	6	Semester 2
ELEC5620	Model Based Software Engineering	6	Semester 2
ELEC5621	Digital Systems Design	6
ELEC5622	Signals, Software and Health	6	Semester 2
ELEC5701	Technology Venture Creation [not offered in 2021]	6	Semester 2
ELEC5760	Intelligent Networked Control	6	Semester 2
ELEC5803	Advanced Bioelectronics [Not Offered 2019]	6	Semester 1

Note: A minimum of 36 credit points (six units of study) must be taken. Specialist units include all ELEC3xxx, ELEC4xxx and ELEC5xxx units of study.

Block 5 - Project Management Electives (Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
ENGG2850	Project Cost and Finance	6	Semester 1
PMGT3611	Projects in Controlled Environment	6	Int June
PMGT3612	Agile Project Management	6	Int July
PMGT3623	Scheduling	6	Semester 2
PMGT3624	Change & Transformation	6	Semester 2
PMGT3856	Sustainability and Knowledge Management	6	Semester 1
PMGT3857	International Project Management	6	Semester 2

Note: In 2024, ENGG units will be re-coded to PMGT.

You may choose up to 12 credit points of PM Electives in place of 12 credit points of Electrical Specialist Electives

Faculty of Engineering

Electrical / Project Management 2019+ (2020)