Faculty of Engineering

Electrical Engineering (mid-year) (2018)


Note: This course version applies only to students first enrolling in 2018.
WARNING: This course version is currently under review and is subject to change.


1. Overview

Course: Electrical Engineering (mid-year) (2018)
CP Required: 192
Min FT Duration: 4.00 Years
Min PT Duration: 4.00 Years
Faculty/School: Faculty of Engineering
Years Offered: 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016

2. Requirements

Summary

In summary the requirements are:

Students must complete 192 credit points as follows:

► 36 credit points of Engineering core units

► The Professional Engagement Program comprising ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

► 72 credit points of Electrical stream core units

► A minimum of 72 credit points of Electrical Specialist elective units

► A maximum of 12 credit points of General (Free) Electives

The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above.

Handbook Rules

The handbook rules governing this degree are as follows:

To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must:

(a) successfully complete 192 credit points comprising:

(i) A minimum of 36 credit points from the Engineering Core Table, including all required units;

(ii) A minimum of 108 credit points from the Engineering Stream Table pertaining to the specialist stream being undertaken, including all required units;

(iii) A minimum of 48 credit points of additional units from the Engineering Stream Specialist Table pertaining to the specialist stream being undertaken, including satisfying any additional requirements specified for the Specialist Table.

(b) Successfully complete the requirements of the Professional Engagement Program

(2) The class of Honours will be determined by the EIHWAM.

(3) In exceptional circumstances, the Dean may vary the conditions for the award of Honours after seeking the advice of the relevant Head of School.

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester's standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Dalyell Scholars Program

Unit substitutions may be available for students enrolled in the Dalyell Scholars Program, depending on their year of commencement and degree. Dalyell Scholars can view the Canvas page for further information specific to their circumstances: https://canvas.sydney.edu.au/courses/7156/pages/enrolment-options-for-dalyell-scholars

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 2

Type CP CP From
6 Select from INFO1110: Introduction to Programming
3 Select from MATH1021: Calculus of One Variable
6 Select from ENGG1111: Integrated Engineering 1
3 Select from MATH1005: Statistical Thinking with Data
6 Select from ELEC1601: Introduction to Computer Systems
0 Select from ENGP1000: Professional Engagement Program 1


Note: All students must enrol in ENGP1000 in their first semester of enrolment.

New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Note: MATH1021 and MATH1005 may be replaced by advanced units MATH1921 and MATH1905.

Year 2 - Semester 1

Type CP CP From
3 Select from MATH1023: Multivariable Calculus and Modelling
6 Select from ELEC2602: Digital Logic
6 Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering
6 Select from PHYS1001: Physics 1 (Regular)
3 Select from MATH1002: Linear Algebra

Note: MATH1023 and MATH1002 may be replaced by advanced units MATH1923 and MATH1902.

Year 2 - Semester 2

Type CP CP From
6 Select from Unit Block:
Electrical Specialist - Electives
2 Select from ENGG2111: Integrated Engineering 2
6 Select from ELEC2104: Electronic Devices and Circuits
6 Select from ELEC2103: Simulation and Numerical Solutions in Engineering
6 Select from PHYS1003: Physics 1 (Technological)

Year 3 - Semester 1

Type CP CP From
6 Select from COMP2123: Data Structures & Algorithms
12 Select from Unit Block:
Electrical Specialist - Electives
6 Select from MATH2061: Linear Mathematics and Vector Calculus
0 Select from ENGP2000: Professional Engagement Program 2


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 3 - Semester 2

Type CP CP From
12 Select from Unit Block:
Electrical Specialist - Electives
6 Select from ELEC2302: Signals and Systems
6 Select from PHYS2213: Physics 2EE

Year 4 - Semester 1

Type CP CP From
2 Select from ENGG3111: Integrated Engineering 3
18 Select from Unit Block:
Electrical Specialist - Electives
6 Select from ELEC4712: Thesis A

Year 4 - Semester 2

Type CP CP From
18 Select from Unit Block:
Electrical Specialist - Electives
6 Select from ELEC4713: Thesis B
0 Select from ENGP3000: Professional Engagement Program 3


Note: New ENGP units will be in place from 2021. You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/professional-engagement-program-pep-2021-changes

Year 5 - Semester 1

Type CP CP From
2 Select from ENGG4111: Integrated Engineering 4
18 Select from Unit Block:
Electrical Specialist - Electives

4. Pathways

48cp Majors

Type CP CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Computer Engineering (24cp)

Type CP CP From
Core
6 ELEC3506: Communications Networks
Core
6 ELEC3607: Embedded Systems
Core
6 ELEC3608: Computer Architecture
List
6 Select from COMP3520: Operating Systems Internals
ELEC3104: Engineering Electromagnetics
ELEC3304: Control
ELEC3305: Digital Signal Processing
ELEC3404: Electronic Circuit Design
ELEC3702: Management for Engineers

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

Major in Internet of Things (IoT) (24cp)

Type CP CP From
Core
6 ELEC5514: IoT Wireless Sensing and Networking
Core
6 ELEC5517: Software Defined Networks
Elective
12 Electives.

Note: Select 12 credit points from: ELEC5518, ELEC5616, ELEC5208, ELEC5508, INFO3406, COMP5047, COMP5216, COMP5426

Major in Power Engineering (24cp)

Type CP CP From
Core
6 ELEC3203: Electricity Networks
Core
6 ELEC3204: Power Electronics and Applications
Core
6 ELEC3206: Electrical Energy Conversion Systems
Core
6 ELEC3304: Control
Core
6 ELEC5204: Power Systems Analysis and Protection
6 Select from ELEC5205: High Voltage Engineering
ELEC5211: Power System Dynamics and Control
ELEC5212: Power System Planning and Markets

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

Major in Telecommunications Engineering (24cp)

Type CP CP From
Core
6 ELEC3305: Digital Signal Processing
Core
6 ELEC3405: Communications Electronics and Photonics
Core
6 ELEC3505: Communications
Core
6 ELEC3506: Communications Networks
Core
6 ELEC4505: Digital Communication Systems

Note: Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 48)

Unit Code Unit Name CP Sessions Offered
AMME4010 Major Industrial Project 24 Semester 1
Semester 2
AMME4111 Thesis A 6 Semester 1
Semester 2
AMME4112 Thesis B 6 Semester 1
Semester 2
CHNG4203 Major Industrial Project 24 Semester 1
Semester 2
CHNG4811 Thesis A 6 Semester 1
Semester 2
CHNG4812 Thesis B 6 Semester 1
Semester 2
CIVL4022 Thesis A 6 Semester 1
Semester 2
CIVL4023 Thesis B 6 Semester 1
Semester 2
ELEC4712 Thesis A 6 Semester 1
Semester 2
ELEC4713 Thesis B 6 Semester 1
Semester 2
ELEC4714 Major Industrial Project 24 Semester 1
Semester 2
ENGG1111 Integrated Engineering 1 6 Semester 1
ENGG2111 Integrated Engineering 2 2 Semester 1
Semester 2
Int February
ENGG3111 Integrated Engineering 3 2 Semester 1
Semester 2
ENGG4111 Integrated Engineering 4 2 Semester 1
ENGP1000 Professional Engagement Program 1 0 Semester 1
Semester 2
ENGP2000 Professional Engagement Program 2 0 Semester 1
Semester 2
ENGP3000 Professional Engagement Program 3 0 Semester 1
Semester 2
MATH1002 Linear Algebra 3 Semester 1
Semester 2
Summer Main
MATH1005 Statistical Thinking with Data 3 Semester 1
Semester 2
Int January
MATH1021 Calculus of One Variable 3 Semester 1
Semester 2
MATH1023 Multivariable Calculus and Modelling 3 Semester 1
Semester 2
MATH1902 Linear Algebra (Advanced) 3 Semester 1
MATH1905 Statistics (Advanced) 3 Semester 2
MATH1921 Calculus of One Variable (Adv) 3 Semester 1
MATH1923 Multivariable Calculus and Modelling (Adv) 3 Semester 2

Note: Complete a minimum of 36cp including:

- ENGP1000 (0cp), ENGP2000 (0cp) and ENGP3000 (0cp)

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - Electrical Core (Min CP: 72,Max CP: 72)

Unit Code Unit Name CP Sessions Offered
COMP2123 Data Structures & Algorithms 6 Semester 1
Semester 2
ELEC1103 Fundamentals of Electrical and Electronic Engineering 6 Semester 1
ELEC1601 Introduction to Computer Systems 6 Semester 1
Semester 2
ELEC2103 Simulation and Numerical Solutions in Engineering 6 Semester 2
ELEC2104 Electronic Devices and Circuits 6 Semester 2
ELEC2302 Signals and Systems 6 Semester 2
ELEC2602 Digital Logic 6 Semester 1
INFO1110 Introduction to Programming 6 Semester 1
Semester 2
MATH2061 Linear Mathematics and Vector Calculus 6 Semester 1
Summer Main
PHYS1001 Physics 1 (Regular) 6 Semester 1
PHYS1003 Physics 1 (Technological) 6 Semester 2
PHYS2213 Physics 2EE 6 Semester 2

Block 5 - Electrical Specialist - Electives (Min CP: 72,Max CP: 84)

Unit Code Unit Name CP Sessions Offered
ELEC3104 Engineering Electromagnetics 6 Semester 1
ELEC3203 Electricity Networks 6 Semester 1
ELEC3204 Power Electronics and Applications 6 Semester 1
ELEC3206 Electrical Energy Conversion Systems 6 Semester 2
ELEC3304 Control 6 Semester 2
ELEC3305 Digital Signal Processing 6 Semester 1
ELEC3404 Electronic Circuit Design 6 Semester 1
ELEC3405 Communications Electronics and Photonics 6 Semester 2
ELEC3505 Communications 6 Semester 1
ELEC3506 Communications Networks 6 Semester 2
ELEC3607 Embedded Systems 6 Semester 1
ELEC3608 Computer Architecture 6 Semester 2
ELEC3609 Internet Software Platforms 6 Semester 2
ELEC3610 E-Business Analysis and Design 6 Semester 1
ELEC3612 Pattern Recognition and Machine Intelligence 6 Semester 1
ELEC3702 Management for Engineers 6 Semester 2
ELEC3802 Fundamentals of Biomedical Engineering 6 Semester 1
ELEC3803 Bioelectronics [not offered in 2021] 6 Semester 2
ELEC4505 Digital Communication Systems 6 Semester 1
ELEC4706 Project Management 6 Semester 1
ELEC5101 Antennas and Propagation 6 Semester 2
ELEC5203 Topics in Power Engineering [not offered in 2021] 6 Semester 2
ELEC5204 Power Systems Analysis and Protection 6 Semester 1
ELEC5205 High Voltage Engineering 6 Semester 2
ELEC5206 Sustainable Energy Systems 6 Semester 2
ELEC5207 Advanced Power Conversion Technologies 6 Semester 2
ELEC5208 Intelligent Electricity Networks 6 Semester 1
ELEC5211 Power System Dynamics and Control 6 Semester 1
ELEC5212 Power System Planning and Markets 6 Semester 2
ELEC5303 Computer Control System Design [not Offered 2021] 6 Semester 1
ELEC5304 Intelligent Visual Signal Understanding 6 Semester 1
ELEC5305 Acoustics, Speech and Signal Processing 6 Semester 2
ELEC5306 Video Intelligence and Compression 6 Semester 1
ELEC5307 Advanced Signal Processing with Deep Learning 6 Semester 2
ELEC5402 Digital Integrated Circuit Design 6
ELEC5403 Radio Frequency Engineering [not offered in 2021] 6 Semester 1
ELEC5507 Error Control Coding 6 Semester 1
ELEC5508 Wireless Engineering 6 Semester 2
ELEC5509 Mobile Networks 6 Semester 1
ELEC5510 Satellite Communication Systems 6 Semester 2
ELEC5511 Optical Communication Systems 6 Semester 1
ELEC5512 Optical Networks 6 Semester 2
ELEC5514 IoT Wireless Sensing and Networking 6 Semester 2
ELEC5516 Electrical and Optical Sensor Design 6 Semester 1
ELEC5517 Software Defined Networks 6 Semester 2
ELEC5518 IoT for Critical Infrastructures 6 Semester 1
ELEC5614 Real Time Computing 6 Semester 1
ELEC5615 Advanced Computer Architecture 6 Semester 1
ELEC5616 Computer and Network Security 6 Semester 1
ELEC5617 Topics in Software Engineering 6 Semester 2
ELEC5618 Software Quality Engineering 6 Semester 1
ELEC5619 Object Oriented Application Frameworks 6 Semester 2
ELEC5620 Model Based Software Engineering 6 Semester 2
ELEC5621 Digital Systems Design 6
ELEC5622 Signals, Software and Health 6 Semester 2
ELEC5701 Technology Venture Creation [not offered in 2021] 6 Semester 2
ELEC5803 Advanced Bioelectronics [Not Offered 2019] 6 Semester 1

Note: Specialist units include all non-core ELEC3xxx, ELEC4xxx and ELEC5xxx units of study.

It is recommended that no more than 18 credit points be taken in non-core ELEC3xxx units.

Block 6 - Engineering General Electives (Max CP: 12)

Unit Code Unit Name CP Sessions Offered
COMP3520 Operating Systems Internals 6 Semester 2

Note: Note: Students may take 12 credit points of free general electives to complete the total number of credit points for their degree. Students may take the following units of study as free general electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculties of: (i) Engineering and Information Technologies (ii) Science (iii) Arts (iv) Sydney Business School

(2) Any other units of study approved by the Faculty of Engineering and Information Technologies Courses Committee, which will be published in an appropriate place by the Faculty.

(3) Any units of study approved by the Dean (or his/her delegate in these matters), or by the relevant Head of School or Program Director, on a case by case basis upon application by the student.