Faculty of Engineering |
Course: | Electrical / Science (2017) |
CP Required: | 240 |
Min FT Duration: | 5.00 Years |
Min PT Duration: | N/A |
Faculty/School: | Faculty of Engineering |
Years Offered: | 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015 |
Type | CP | CP From |
6 |
Select from
INFO1103: Introduction to Programming Note: This unit is discontinued from 2018. Replacement unit is INFO1113. |
|
3 |
Select from
MATH1001: Differential Calculus Note: This unit is discontinued from 2018. Replacement unit is MATH1021. |
|
6 |
Select from
ENGG1111: Integrated Engineering 1 |
|
3 |
Select from
MATH1002: Linear Algebra |
|
6 |
Select from
Unit Block: Science |
Note:
In the BE/BSc program the 36 cp of core subjects MATH#### and PHYS#### may count to both the Science and the Engineering degrees. For all subjects which fall in this category the student must fulfill credit point requirements of the combined degree by completing additional Electrical electives and/or Science subjects.
ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1001 and MATH1002 may be replaced by advanced units MATH1901 and MATH1902.
Type | CP | CP From |
6 |
Select from
INFO1105: Data Structures Note: This unit is discontinued from 2018. Replacement unit is COMP2123. |
|
3 |
Select from
MATH1003: Integral Calculus and Modelling Note: This unit is discontinued from 2018. Replacement unit is MATH1023. |
|
3 |
Select from
MATH1005: Statistical Thinking with Data |
|
6 |
Select from
ELEC1601: Introduction to Computer Systems |
|
6 |
Select from
Unit Block: Science |
Note: MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.
Type | CP | CP From |
6 |
Select from
ELEC1103: Fundamentals of Electrical and Electronic Engineering |
|
6 |
Select from
PHYS1001: Physics 1 (Regular) |
|
6 |
Select from
MATH2061: Linear Mathematics and Vector Calculus |
|
6 |
Select from
Unit Block: Science |
Type | CP | CP From |
2 |
Select from
ENGG2111: Integrated Engineering 2 |
|
6 |
Select from
PHYS1003: Physics 1 (Technological) |
|
6 |
Select from
ELEC2104: Electronic Devices and Circuits |
|
6 |
Select from
ELEC2103: Simulation and Numerical Solutions in Engineering |
|
6 |
Select from
Unit Block: Science |
Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv, with Faculty approval.
Type | CP | CP From |
6 |
Select from
COMP2129: Operating Systems and Machine Principles Note: This unit is discontinued from 2018. Replacement unit is COMP2017. |
|
6 |
Select from
ELEC2602: Digital Logic |
|
6 |
Select from
Unit Block: Science |
|
6 |
Select from
Unit Block: Science |
Type | CP | CP From |
6 |
Select from
ELEC2302: Signals and Systems |
|
6 |
Select from
PHYS2213: Physics 2EE |
|
6 |
Select from
Unit Block: Science |
|
6 |
Select from
Unit Block: Science |
Type | CP | CP From |
2 |
Select from
ENGG3111: Integrated Engineering 3 |
|
6 |
Select from
Unit Block: Electrical Specialist - Electives |
|
6 |
Select from
Unit Block: Electrical Specialist - Electives |
|
6 |
Select from
Unit Block: Science |
|
6 |
Select from
Unit Block: Science |
Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv), with Faculty approval.
Type | CP | CP From |
6 |
Select from
Unit Block: Electrical Specialist - Electives |
|
6 |
Select from
Unit Block: Electrical Specialist - Electives |
|
6 |
Select from
Unit Block: Science |
|
6 |
Select from
Unit Block: Science |
Type | CP | CP From |
0 |
Select from
ENGG4000: Practical Experience |
|
2 |
Select from
ENGG4111: Integrated Engineering 4 |
|
6 |
Select from
ELEC4713: Thesis B |
|
6 |
Select from
Unit Block: Electrical Specialist - Electives |
|
0 |
Select from
ENGG4000: Practical Experience |
|
6 |
Select from
Unit Block: Electrical Specialist - Electives |
|
6 |
Select from
Unit Block: Science |
Note: ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B, with Faculty approval.
Type | CP | CP From |
6 |
Select from
ELEC4713: Thesis B |
|
6 |
Select from
Unit Block: Electrical Specialist - Electives |
|
6 |
Select from
Unit Block: Science |
Type | CP | CP From |
Note:
From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.
You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors
Note:
24 Credit Points to Complete this Major
Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.
Type | CP | CP From |
Core
|
6 |
ELEC5514: IoT Wireless Sensing and Networking |
Core
|
6 |
ELEC5517: Software Defined Networks |
Elective
|
12 |
Electives.
Note: Select 12 credit points from: ELEC5518, ELEC5616, ELEC5208, ELEC5508, INFO3406, COMP5047, COMP5216, COMP5426 |
Note:
36 CP minimum Requirements to achieve this Major.
-ELEC3203 and ELEC3206 are not counted towards the major, but are pre-requisites for the ELEC5204 units.
Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.
Type | CP | CP From |
Core
|
6 |
ELEC3305: Digital Signal Processing |
Core
|
6 |
ELEC3405: Communications Electronics and Photonics |
Core
|
6 |
ELEC3505: Communications |
Core
|
6 |
ELEC3506: Communications Networks |
Core
|
6 |
ELEC4505: Digital Communication Systems |
Note:
All units must be completed (30 Credit Points).
Please check the prerequisites for the higher level units in this major and ensure you will be able to complete them prior to undertaking the higher level units.
Unit Code | Unit Name | CP | Sessions Offered |
AERO2711 | Aerospace Engineering Project 1 | 6 |
Semester 1 Semester 2 Int February Int July |
AERO3711 | Aerospace Engineering Project 2 | 6 |
Semester 1 Semester 2 Int February Int July |
AERO4711 | Aerospace Engineering Project 3 | 6 |
Semester 1 Semester 2 Int February Int July |
AMME4010 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
AMME4111 | Thesis A | 6 |
Semester 1 Semester 2 |
AMME4112 | Thesis B | 6 |
Semester 1 Semester 2 |
CHNG4203 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
CHNG4811 | Thesis A | 6 |
Semester 1 Semester 2 |
CHNG4812 | Thesis B | 6 |
Semester 1 Semester 2 |
CIVL4022 | Thesis A | 6 |
Semester 1 Semester 2 |
CIVL4023 | Thesis B | 6 |
Semester 1 Semester 2 |
ELEC4702 | Practical Experience | 0 |
Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December |
ELEC4712 | Thesis A | 6 |
Semester 1 Semester 2 |
ELEC4713 | Thesis B | 6 |
Semester 1 Semester 2 |
ELEC4714 | Major Industrial Project | 24 |
Semester 1 Semester 2 |
ENGG1061 | Advanced Engineering 1 | 6 |
Semester 1 Semester 2 |
ENGG1111 | Integrated Engineering 1 | 6 |
Semester 1 |
ENGG2062 | Engineering Project: Business Plan 2 Adv | 6 |
Semester 2 |
ENGG2111 | Integrated Engineering 2 | 2 |
Semester 1 Semester 2 Int February |
ENGG3062 | Technology Education (Advanced) | 6 |
Semester 2 |
ENGG3111 | Integrated Engineering 3 | 2 |
Semester 1 Semester 2 |
ENGG4000 | Practical Experience | 0 |
Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December |
ENGG4064 | Advanced Engineering Design A | 6 |
Semester 2 Int July |
ENGG4065 | Advanced Engineering Design B | 6 |
Semester 2 |
ENGG4111 | Integrated Engineering 4 | 2 |
Semester 1 |
MATH1001 | Differential Calculus | 3 |
Semester 1 Summer Main |
MATH1002 | Linear Algebra | 3 |
Semester 1 Semester 2 Summer Main |
MATH1003 | Integral Calculus and Modelling | 3 |
Semester 2 Summer Main |
MATH1005 | Statistical Thinking with Data | 3 |
Semester 1 Semester 2 Int January |
MATH1901 | Differential Calculus (Advanced) | 3 |
Semester 1 |
MATH1902 | Linear Algebra (Advanced) | 3 |
Semester 1 |
MATH1903 | Integral Calculus and Modelling Advanced | 3 |
Semester 2 |
MATH1905 | Statistics (Advanced) | 3 |
Semester 2 |
Note:
Complete a minimum of 36cp including:
- ENGG4000 Practical Experience (0cp) or ELEC4702 Practical Experience (0cp)
- Exactly 6cp from ENGG1111 Integrated Engineering 1 (6cp) OR ENGG1061 Advanced Engineering 1A (6cp) (see note 1)
- At least 2cp from ENGG2xxx Integrated Engineering 2 (2cp) OR ENGG2062 Engineering Project Business Plan 2 Adv (6cp) (see note 1) OR AERO2711 Aerospace Engineering Project 1 (see note 1)
- At least 2cp from ENGG3xxx Integrated Engineering 3 (2cp) OR ENGG3062 Technology Education (Advanced) (6cp) (see note 1) OR AERO3711 Advanced Aerospace Project 2 (see note 1)
- At least 2cp from ENGG4xxx Integrated Engineering 4 (2cp) OR ENGG4064 Advanced Engineering Design A (6cp) (see note 1) OR ENGG4065 Advanced Engineering Design B (6cp) (see note 1) OR AERO4711 Advanced Aerospace Project 3 (see note 1)
- Exactly 12cp of MATH1xxxx units: MATH1001 Differential Calculus (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1003 Integral Calculus AND Modelling (3cp) MATH1005 Statistics (3cp)
- A minimum of 12cp of (see notes 2,3) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 hesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)
Note 1. The Advanced Engineering units are only available to students who have been accepted into the relevant year of the Advanced Engineering program.
Note 2. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream.
Unit Code | Unit Name | CP | Sessions Offered |
COMP2129 | Operating Systems and Machine Principles | 6 |
Semester 1 |
ELEC1103 | Fundamentals of Electrical and Electronic Engineering | 6 |
Semester 1 |
ELEC1601 | Introduction to Computer Systems | 6 |
Semester 1 Semester 2 |
ELEC2103 | Simulation and Numerical Solutions in Engineering | 6 |
Semester 2 |
ELEC2104 | Electronic Devices and Circuits | 6 |
Semester 2 |
ELEC2302 | Signals and Systems | 6 |
Semester 2 |
ELEC2602 | Digital Logic | 6 |
Semester 1 |
INFO1103 | Introduction to Programming | 6 |
Semester 1 Semester 2 |
INFO1105 | Data Structures | 6 |
Semester 2 Summer Early Summer Main |
MATH2061 | Linear Mathematics and Vector Calculus | 6 |
Semester 1 Summer Main |
PHYS1001 | Physics 1 (Regular) | 6 |
Semester 1 |
PHYS1003 | Physics 1 (Technological) | 6 |
Semester 2 |
PHYS2213 | Physics 2EE | 6 |
Semester 2 |
Note: A minimum of 42 credit points (seven units of study) must be taken. Specialist units include all ELEC3xxx, ELEC4xxx and ELEC5xxx.
Unit Code | Unit Name | CP | Sessions Offered |
COMP3520 | Operating Systems Internals | 6 |
Semester 2 |
Note:
The following units are approved as general electives for Bachelor of Engineering Honours Students, provided that students are able to meet the enrolment requirements specified by the relevant faculty and provided that the unit of study is not substantially the same as a unit of study already completed.
(1) All units offered by the following Faculties: Engineering and Information Technologies, Business, Science, Arts and Social Sciences.
(2) Additional units as included in the list of approved general Engineering electives, as approved by the Faculty Board (or, within delegated authority, the Faculty Courses Committee).
Note: Candidates must complete 96 credit points of Science study, including at least one major in a Science subject area. Math and Physics units taken as part of the Engineering component may be counted towards the 96 cp total. See Science faculty handbook for list of Science units and majors: http://sydney.edu.au/handbooks/science/