2. Requirements

In summary the requirements are:

Students must complete 192 credit points as follows:

► 36 credit points of Engineering core units

► 72 credit points of Biomedical stream core units

► 6 credit points of 1st Year Computing core units

► 6 credit points of 1st Year Mechanics core units

► 6 credit points of 2nd Year Systems core units

► 6 credit points of 4th Year Control core units

► A minimum of 12 credit points of Biomedical Specialist electives

► A minimum of 24 credit points of Biomedical Stream electives

► A maximum of 12 credit points of General (Free) Electives

The completion of a major is not necessary. If a student chooses to do a major, aligned majors can be completed within the 192 credit points described above.

The handbook rules governing this degree are as follows:

To qualify for the award of the Bachelor of Engineering Honours degree, a candidate must

(a) successfully complete 192 credit points, comprising: (i) A minimum of 36cp from the Engineering Core Table, including all required units; (ii) A minimum of 108cp from the Biomedical Stream Core Table, including all required units; (iii) A minimum of 48cp of additional units from the Biomedical Stream Specialist Table, including satisfying any additional requirements specified for the Specialist Table; and;

(b) have an EWAM of at least 65 immediately prior to the semester in which a thesis unit of study is first attempted; and

(c) have an EIHWAM of at least 65 at the completion of the degree; and

(d) complete the requirements within a time limit of 5 years for a single Bachelor of Engineering Honours degree or complete the requirements within a time limit of 6 years for a combined Bachelor of Engineering Honours combined degree.

Candidates who satisfy Clause (a) above, but who have not satisfied all each of Clauses (b), (c) and (d), will qualify for the award of the Bachelor of Engineering degree (i.e. the pass degree, awarded without Honours).

Advanced units in Maths and Science

Most units of study offered by the Science Faculty on the list of core requirements can be replaced by an equivalent advanced level unit; subject to prerequisite conditions (as required by the Faculty of Science) being met. Students considering doing advanced options should seek advice from their department before enrolling.

Study Abroad

Students undertaking Study Abroad in a particular year of their degree must enrol in the appropriate International Exchange Program units of study as an alternative to a semester`s standard units.

Permission from the relevant Head of School must be sought prior to enrolling in exchange units of study.

Majors

A major requires:

(a) the completion of 24 credit points chosen from units of study listed in the table for that major;

(b) satisfying any additional requirements specified for the major, and listed with the table of units for the major;

(c) the completion of a thesis project that has been approved by the Head of School (or delegate) as relevant to the topic of the major.

Faculty Resolutions

Details of relevant Faculty resolutions are available via the university handbook site at: http://sydney.edu.au/handbooks/

3. Semesters

Year 1 - Semester 2

Type	CP	CP From
Core 1st Year Mechanics Units	6	Select from Unit Block: Core 1st Year Mechanics Units
Biomedical Stream Core	6	Select from AMME1961: Biomedical Engineering 1B
Engineering Core	6	Select from ENGG1111: Integrated Engineering 1
Engineering Core	3	Select from MATH1005: Statistical Thinking with Data
Engineering Core	3	Select from MATH1003: Integral Calculus and Modelling Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1023.

Note: ENGG1111 may be replaced by ENGG1061 Advanced Engineering for approved students. MATH1003 and MATH1005 may be replaced by advanced units MATH1903 and MATH1905.

Year 2 - Semester 1

Type	CP	CP From
Biomedical Stream Core	6	Select from CHEM1101: Chemistry 1A Note: This unit is discontinued from 2018. Replacement unit is CHEM1111.
Engineering Core	3	Select from MATH1001: Differential Calculus Note: Note: This unit is discontinued from 2018. Replacement unit is MATH1021.
Biomedical Stream Core	6	Select from AMME1960: Biomedical Engineering 1A
Engineering Core	3	Select from MATH1002: Linear Algebra
Core 1st Year Computing Units	6	Select from Unit Block: Core 1st Year Computing Units Note: Select from either ENGG1801 or INFO1103. INFO1103 is discontinued from 2018. Replacement unit is INFO1110.

Year 2 - Semester 2

Type	CP	CP From
Engineering Core	2	Select from ENGG2111: Integrated Engineering 2
Core 2nd Year Systems Units	6	Select from Unit Block: Core 2nd Year Systems Units Note: Select CHNG2803 Energy and Fluid Systems Practice in Year 3 Semester 1 (compulsory for Chemical Major; select CHNG2804 here), or from AMME2200 (preferred for Mechanical Major) or ELEC2302 Signals and Systems (compulsory for Electrical, and IT Majors) or MECH2400 Mechanical Design 1 in Semester 2 (compulsory for Mechatronic Major, recommended if no Major selected).
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Biomedical Stream Core	6	Select from MECH2901: Anatomy and Physiology for Engineers
Biomedical Stream Core	6	Select from AMME1362: Introduction to Engineering Materials

Note: ENGG2111 may be replaced by ENGG2062 Engineering Project: Business Plan 2 Adv or AERO2711 Advanced Aerospace Project 1, with school approval.

Year 3 - Semester 1

Type	CP	CP From
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Biomedical Stream Core	6	Select from AMME2960: Biomedical Engineering 2
Biomedical Stream Core	6	Select from ELEC1103: Fundamentals of Electrical and Electronic Engineering

Year 3 - Semester 2

Type	CP	CP From
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives or other units.
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Biomedical Stream Core	6	Select from ELEC2104: Electronic Devices and Circuits
Biomedical Stream Core	6	Select from MECH3921: Biomedical Design and Technology

Year 4 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG3111: Integrated Engineering 3
Biomedical Stream Core	6	Select from MECH3660: Manufacturing Engineering Note: This unit is discontinued from 2018. Replacement unit is AMME3660.
Biomedical Specialist Electives	6	Select from Unit Block: Biomedical Specialist Electives
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives or other units.

Note: ENGG3111 may be replaced by ENGG3062 Technology Education (Adv) or AERO3711 Advanced Aerospace Project 2, with school approval.

Year 4 - Semester 2

Type	CP	CP From
Biomedical Stream Electives	6	Select from Unit Block: Biomedical Stream Electives
Biomedical Specialist Electives	6	Select from Unit Block: Biomedical Specialist Electives
Biomedical Stream Core	6	Select from MECH4961: Biomechanics and Biomaterials
Engineering Core	0	Select from ENGG4000: Practical Experience
Engineering Core	6	Select from AMME4111: Thesis A Note: Biomedical stream students should be taking replacement unit BMET4111

Year 5 - Semester 1

Type	CP	CP From
Engineering Core	2	Select from ENGG4111: Integrated Engineering 4
Core 4th Year Control Units	6	Select from Unit Block: Core 4th Year Control Units
Biomedical Stream Core	6	Select from AMME4971: Tissue Engineering
Engineering Core	6	Select from AMME4112: Thesis B Note: Biomedical stream students should be taking replacement unit BMET4112

Note: ENGG4111 may be replaced by ENGG4064/5 Advanced Engineering Design A/B or AERO4711 Advanced Aerospace Project 3, with school approval.

4. Pathways

48cp Majors

Type

CP From

Note: From 2019 onwards, all engineering majors will be converted to the 48 credit point format, and several new majors will be introduced - details can be viewed in the 2019 degree structures.

You can find more information at https://canvas.sydney.edu.au/courses/2806/pages/feit-your-studies-bachelor-of-engineering-majors

Major in Chemical Engineering (24cp)

Type	CP	CP From
Core	6	CHNG1103: Conservation of Mass and Energy
Core	6	ENGG1801: Engineering Computing
Core	6	ENGG1802: Engineering Mechanics
Core	6	CHNG2801: Fluid Mechanics
Core	6	CHNG2804: Chemical Engineering Thermodynamics Note: To be taken in Year 2 Semester 2 in the Core 2nd Year Systems Units slot- which moves to Year 3 Semester 1 with selection of compulsory CHNG2803.
Core 2nd Year Systems Units	6	Select from CHNG2803: Heat and Mass Transfer Note: To be selected from Core 2nd Year Systems Units
Biomedical Stream Electives	24	Select from CHNG3801: Process Plant Design CHNG3802: Process Dynamics and Control CHNG3803: Reaction Engineering CHNG3804: Biochemical Engineering Note: The major requires a minimum of 24 cp from CHNG3xxx units. Note that a number of prerequisite CHNG units at level-1000 and level 2000 will need to be completed beforehand. These units are then selected in place of Biomedical Stream Electives.

Major in Electrical Engineering (24cp)

Type	CP	CP From
Biomedical Stream Electives	24	Select from ELEC2103: Simulation and Numerical Solutions in Engineering ELEC2602: Digital Logic ELEC3104: Engineering Electromagnetics ELEC3105: Circuit Theory and Design ELEC3203: Electricity Networks ELEC3204: Power Electronics and Applications ELEC3206: Electrical Energy Conversion Systems ELEC3304: Control ELEC3305: Digital Signal Processing ELEC3404: Electronic Circuit Design ELEC3405: Communications Electronics and Photonics ELEC3505: Communications ELEC3506: Communications Networks ELEC3607: Embedded Systems ELEC3608: Computer Architecture ELEC3609: Internet Software Platforms ELEC3610: E-Business Analysis and Design ELEC3702: Management for Engineers ELEC3802: Fundamentals of Biomedical Engineering ELEC3803: Bioelectronics [not offered in 2021] Note: A minimum of four units (24 cp) must be completed with at least 18 cp from ELEC level 3000 units or higher. Note that the following ELEC unit may be necessary as a prerequisite for later ELEC3xxx units: ELEC2602. This unit is selected in place of Biomedical Stream Electives.
Core 2nd Year Systems Units	6	Select from ELEC2302: Signals and Systems
Core 1st Year Mechanics Units	6	Select from PHYS1001: Physics 1 (Regular)
Core 1st Year Computing Units	6	Select from INFO1103: Introduction to Programming Note: INFO1103 is discontinued from 2018. Replacement unit is INFO1110.

Major in Humanitarian Engineering (24cp)

Type	CP	CP From
Core	6	CIVL3310: Humanitarian Engineering Note: Students may take SLIC3000 or SLIC4000 instead of CIVL5330 as part of the Humanitarian Engineering major
Core	6	CIVL5320: Engineering for Sustainable Development
Bachelor of Engineering General Elective Table	6	Select from ASNS2665: Understanding Southeast Asia EDUF3026: Global Poverty and Education HSBH3009: International Health Project ITLS6007: Disaster Relief Operations [not offered in 2021] PMGT3857: International Project Management Note: To be taken from the Free Electives unit block
Biomedical Stream Electives	6	Select from CIVL5330: Global Engineering Field Work Note: Field work is expected to be taken in between semesters.

Note: Students will also be required to take ASNS2665 (apply through Special Permission) in place of one of their Biomedical Stream Electives, in order to complete the requirements of the Humanitarian major.

Major in Information Technology (24cp)

Type	CP	CP From
Biomedical Stream Electives	24	Select from COMP2007: Algorithms and Complexity COMP2017: Systems Programming COMP2022: Models of Computation COMP2121: Principles of Distributed Systems and Networks COMP2123: Data Structures & Algorithms COMP2129: Operating Systems and Machine Principles COMP2823: Data Structures & Algorithms (Adv) COMP2907: Algorithms and Complexity (Advanced) COMP2922: Models of Computation (Adv) COMP3027: Algorithm Design COMP3109: Programming Languages and Paradigms COMP3221: Distributed Systems COMP3308: Introduction to Artificial Intelligence COMP3419: Graphics and Multimedia COMP3520: Operating Systems Internals COMP3530: Discrete Optimization COMP3608: Introduction to Artificial Intelligence (Adv) COMP3615: Computer Science Project DATA2001: Data Science: Big Data and Data Diversity DATA2002: Data Analytics: Learning from Data DATA3001: Data Science Capstone Project [not offered in 2020] DATA3404: Scalable Data Management DATA3406: Human-in-the-Loop Data Analytics INFO1113: Object-Oriented Programming INFO2110: Systems Analysis and Modelling INFO2120: Database Systems 1 INFO2150: Introduction to Health Data Science INFO2315: Introduction to IT Security INFO2820: Database Systems 1 (Advanced) INFO2911: IT Special Project 2A INFO2912: IT Special Project 2B INFO3220: Object Oriented Design INFO3315: Human-Computer Interaction INFO3402: Management of IT Projects and Systems INFO3404: Database Systems 2 INFO3406: Introduction to Data Analytics [not offered in 2020] INFO3504: Database Systems 2 (Adv) INFO3600: Major Development Project (Advanced) INFO3616: Principles of Security and Security Engineering INFO3911: IT Special Project 3A INFO3912: IT Special Project 3B ISYS2110: Analysis & Design of Web Information Systems ISYS2120: Data & Information Management ISYS2160: Information Systems in the Internet Age ISYS3400: Information Systems Project ISYS3401: Information Technology Evaluation ISYS3402: Decision Analytics & Support Systems [not running in 2019] SOFT2201: Software Construction and Design 1 SOFT2412: Agile Software Development Practices SOFT3202: Software Construction and Design 2 SOFT3410: Concurrency for Software Development SOFT3413: Software Development Project [not offered in 2020] Note: A minimum of four units (24 cp) must be completed with at least 18 cp from COMP or INFO units at level 3000 units or higher. Note that INFO1xxx, COMP2xxx and INFO3xxx units may be necessary as prerequistes for subsequent level 3000 units. These units are then selected in place of Biomedical Stream Electives.
Core 2nd Year Systems Units	6	Select from ELEC2302: Signals and Systems
Core 1st Year Mechanics Units	6	Select from PHYS1001: Physics 1 (Regular)
Core 1st Year Computing Units	6	Select from INFO1103: Introduction to Programming Note: INFO1103 is discontinued from 2018. Replacement unit is INFO1110.

Major in Mechanical Engineering (24cp)

Type	CP	CP From
Core	6	AMME2301: Mechanics of Solids
Core	6	AMME2500: Engineering Dynamics
Core 2nd Year Systems Units	6	Select from AMME2261: Fluid Mechanics 1
List	24	Select from AMME3500: System Dynamics and Control MECH3260: Thermal Engineering and Environment MECH3261: Fluid Mechanics 2 MECH3361: Mechanics of Solids 2 MECH3362: Engineering Materials for Adv Manufacturing Note: A minimum of four units (24 cp) must be completed with at least 18cp at level 3000 or higher (i.e. three from AMME3500, MECH3260, MECH3261, MECH3361 or MECH3362 must be completed). Students also need to complete AMME2301, AMME2500, MECH2400 to meet the prerequisite conditions of the level 3000 units. It is recommended that students complete either AMME2261 or AMME2262 as well. These units are taken in place of Biomedical Stream Electives.
Core 1st Year Computing Units	6	Select from ENGG1801: Engineering Computing
Core 1st Year Mechanics Units	6	Select from ENGG1802: Engineering Mechanics

Major in Mechatronic Engineering (24cp)

Type	CP	CP From
Core	6	MTRX1702: Mechatronics 1
Core	6	MTRX1705: Introduction to Mechatronic Design
Core	6	AMME2500: Engineering Dynamics
Core	6	MTRX2700: Mechatronics 2
Core 2nd Year Systems Units	6	Select from MECH2400: Mechanical Systems Design 1
Biomedical Stream Electives	18	Select from AMME3500: System Dynamics and Control ELEC3204: Power Electronics and Applications MTRX3700: Mechatronics 3 MTRX3760: Mechatronic Systems Design
Core 1st Year Mechanics Units	6	Select from ENGG1802: Engineering Mechanics
Core 1st Year Computing Units	6	Select from ENGG1801: Engineering Computing

Note: To be eligible for this major, students must complete 24cp ( 4 units) as listed in the Major Table of which at least 18cp must be level 3000 or higher. Pre-requisite 1000 or 2000 level units will need to be completed to allow enrolment in the higher level units. These units are then selected in place of Biomedical Stream Electives.

5. Unit Blocks

Block 1 - Engineering Core (Min CP: 36,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME4010	Major Industrial Project	24	Semester 1 Semester 2
AMME4111	Thesis A	6	Semester 1 Semester 2
AMME4112	Thesis B	6	Semester 1 Semester 2
BMET4010	Major Industrial Project	24	Semester 1 Semester 2
BMET4111	Thesis A	6	Semester 1 Semester 2
BMET4112	Thesis B	6	Semester 1 Semester 2
CHNG4203	Major Industrial Project	24	Semester 1 Semester 2
CHNG4811	Thesis A	6	Semester 1 Semester 2
CHNG4812	Thesis B	6	Semester 1 Semester 2
CIVL4022	Thesis A	6	Semester 1 Semester 2
CIVL4023	Thesis B	6	Semester 1 Semester 2
ELEC4712	Thesis A	6	Semester 1 Semester 2
ELEC4713	Thesis B	6	Semester 1 Semester 2
ELEC4714	Major Industrial Project	24	Semester 1 Semester 2
ENGG1111	Integrated Engineering 1	6	Semester 1
ENGG2111	Integrated Engineering 2	2	Semester 1 Semester 2 Int February
ENGG3111	Integrated Engineering 3	2	Semester 1 Semester 2
ENGG4000	Practical Experience	0	Int January Int February Int March Int April Int May Int June Int July Int August Int September Int October Int November Int December
ENGG4111	Integrated Engineering 4	2	Semester 1
MATH1002	Linear Algebra	3	Semester 1 Semester 2 Summer Main
MATH1005	Statistical Thinking with Data	3	Semester 1 Semester 2 Int January
MATH1021	Calculus of One Variable	3	Semester 1 Semester 2
MATH1023	Multivariable Calculus and Modelling	3	Semester 1 Semester 2
MATH1902	Linear Algebra (Advanced)	3	Semester 1
MATH1905	Statistics (Advanced)	3	Semester 2
MATH1921	Calculus of One Variable (Adv)	3	Semester 1
MATH1923	Multivariable Calculus and Modelling (Adv)	3	Semester 2

Note: Complete a minimum of 36cp including:

- Exactly 12cp of Integrated Engineering units comprising ENGG1111 (6cp), ENGG2111 (2cp), ENGG3111 (2cp) and ENGG4111 (2cp)

- Exactly 12cp of MATH1xxx units: MATH1021 Calculus of One Variable (3cp) AND MATH1002 Linear Algebra (3cp) AND MATH1023 Multivariable Calculus and Modelling (3cp) AND MATH1005 Statistics (3cp)

- A minimum of 12cp of (see note 1) from either AMME4111-4112 Thesis A & B (6cp+6cp) OR BMET4111-4112 Thesis A & B (6cp+6cp) OR CHNG4811-CHNG4812 Thesis A & B (6cp+6cp) OR CIVL4022-4023 Thesis A & B (6cp+6cp) OR ELEC4712-4713 Thesis A & B (6cp+6cp) OR AMME4010 Major Industrial Project (24cp) OR BMET4010 Major Industrial Project (24cp) OR CHNG4203 Major Industrial Project (24cp) OR ELEC4714 Major Industrial Project (24cp)

Note 1. All Thesis A units are mutually prohibited (meaning that only one can be completed), and all Thesis B units have the associated Thesis A unit as a pre-requisite. Students may undertake only the Thesis units relevant to their stream or major.

Block 2 - Biomedical Stream Core (Min CP: 72,Max CP: 72)

Unit Code	Unit Name	CP	Sessions Offered
AMME1362	Introduction to Engineering Materials	6	Semester 2
AMME1960	Biomedical Engineering 1A	6	Semester 1
AMME1961	Biomedical Engineering 1B	6	Semester 2
AMME2960	Biomedical Engineering 2	6	Semester 1
AMME4971	Tissue Engineering	6	Semester 1
CHEM1101	Chemistry 1A	6	Semester 1 Semester 2 Summer Main
CHEM1111	Chemistry 1A	6	Semester 1 Semester 2 Int January
CHEM1911	Chemistry 1A (Adv)	6	Semester 1
ELEC1103	Fundamentals of Electrical and Electronic Engineering	6	Semester 1
ELEC2104	Electronic Devices and Circuits	6	Semester 2
MECH2901	Anatomy and Physiology for Engineers	6	Semester 2
MECH3660	Manufacturing Engineering	6	Semester 1
MECH3921	Biomedical Design and Technology	6	Semester 2
MECH4961	Biomechanics and Biomaterials	6	Semester 2

Block 3 - Core 1st Year Computing Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
ENGG1801	Engineering Computing	6	Semester 1 Int January
INFO1103	Introduction to Programming	6	Semester 1 Semester 2

Block 4 - Core 1st Year Mechanics Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
ENGG1802	Engineering Mechanics	6	Semester 2 Summer Main Int January
PHYS1001	Physics 1 (Regular)	6	Semester 1

Block 5 - Core 2nd Year Systems Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AMME2200	Introductory Thermofluids	6	Semester 2
CHNG2803	Heat and Mass Transfer	6	Semester 1
ELEC2302	Signals and Systems	6	Semester 2
MECH2400	Mechanical Systems Design 1	6	Semester 1

Note: Choice should be based on desired major area of study:

Chemical Major- CHNG2803

Electrical & IT Majors- ELEC2302

Mechanical Major- AMME2200

Mechatronics Major, or no Major- MECH2400

Students must complete 6 cp from this block.

Block 6 - Core 4th Year Control Units (Min CP: 6,Max CP: 6)

Unit Code	Unit Name	CP	Sessions Offered
AMME4790	Introduction to Biomechatronics	6	Semester 2
BMET5995	Advanced Bionics	6	Semester 1
ELEC3802	Fundamentals of Biomedical Engineering	6	Semester 1

Note: Students must complete 6 cp from this block

AMME4790 has been replaced by AMME5790 from 2017

Block 7 - Biomedical Specialist Electives (Min CP: 12,Max CP: 36)

Unit Code	Unit Name	CP	Sessions Offered
AMME2262	Introduction to Thermal Engineering	6	Semester 2
AMME4710	Computer Vision and Image Processing	6	Semester 2
AMME4981	Applied Biomedical Engineering	6	Semester 1
AMME4990	Biomedical Product Development	6	Semester 1
AMME4992	Regulatory Affairs in the Medical Industry	6	Semester 2
AMME5931	Nanomaterials in Medicine	6	Semester 1
AMME5951	Fundamentals of Neuromodulation	6	Semester 1
AMME5958	Nanotechnology in Biomedical Engineering	6	Semester 2
AMME5962	Introduction to Mechanobiology	6	Semester 2
AMME5995	Advanced Bionics	6	Semester 1
CHNG5601	Membrane Science	6	Semester 1
CHNG5602	Biophysics and Biosensors	6	Semester 2
CHNG5603	Advanced Industrial Modelling and Analysis	6	Semester 1
CHNG5604	Advanced Membrane Engineering	6	Semester 2
CHNG5605	Bio-Products: Laboratory to Marketplace	6	Semester 2
COMP5048	Visual Analytics	6	Semester 1 Semester 2
COMP5424	Information Technology in Biomedicine	6	Semester 1
COMP5456	Introduction to Bioinformatics [not running]	6	Semester 2
ELEC3305	Digital Signal Processing	6	Semester 1
ELEC5514	IoT Wireless Sensing and Networking	6	Semester 2
ELEC5614	Real Time Computing	6	Semester 1
ELEC5701	Technology Venture Creation [not offered in 2021]	6	Semester 2
ELEC5803	Advanced Bioelectronics [Not Offered 2019]	6	Semester 1
HTIN5002	Quality Frameworks for Health Innovation	6	Semester 2 Block Mode
MECH4902	Orthopaedic and Surgical Engineering	6	Semester 2
MECH5701	Computers in Real Time Control and Instrumentation	6	Semester 1
MECH5720	Sensors and Signals	6	Semester 2
MECH5907	Orthopaedic and Surgical Engineering	6	Semester 2
MTRX5700	Experimental Robotics	6	Semester 1

Note: A minimum of 12 cp must be completed. MECH4902 has been replaced by MECH5907 from 2017.

Block 8 - Biomedical Stream Electives (Min CP: 24,Max CP: 48)

Unit Code	Unit Name	CP	Sessions Offered
AMME2200	Introductory Thermofluids	6	Semester 2
AMME2261	Fluid Mechanics 1	6	Semester 1
AMME2262	Introduction to Thermal Engineering	6	Semester 2
AMME2301	Mechanics of Solids	6	Semester 2
AMME2500	Engineering Dynamics	6	Semester 1
AMME3500	System Dynamics and Control	6	Semester 1
CHNG2801	Fluid Mechanics	6	Semester 1
CHNG2802	Chemical Engineering Modelling and Analysis	6	Semester 1
CHNG2803	Heat and Mass Transfer	6	Semester 1
CHNG2804	Chemical Engineering Thermodynamics	6	Semester 2
CHNG2805	Engineering for a Sustainable Society	6	Semester 2
CHNG2806	Separation Processes	6	Semester 2
CHNG3801	Process Plant Design	6	Semester 2
CHNG3802	Process Dynamics and Control	6	Semester 1
CHNG3803	Reaction Engineering	6	Semester 1
CHNG3804	Biochemical Engineering	6	Semester 2
CHNG3805	Particle Processing	6	Semester 1
CHNG3806	Risk Management for Chemical Engineering	6	Semester 2
CHNG3807	Products and Value Chains [not running in 2020]	6	Semester 2
CHNG3808	Engineering Macromolecules & Nanocomposites	6	Semester 1
CHNG3809	Laboratory and Industrial Practice	6	Semester 1
CHNG4802	Chemical Engineering Design A	6	Semester 1
CHNG4806	Chemical Engineering Design B	6	Semester 2
CIVL3310	Humanitarian Engineering	6	Semester 1
CIVL5320	Engineering for Sustainable Development	6	Semester 2
CIVL5330	Global Engineering Field Work	6	Int July
COMP2007	Algorithms and Complexity	6	Semester 2
COMP2017	Systems Programming	6	Semester 1
COMP2022	Models of Computation	6	Semester 2
COMP2121	Principles of Distributed Systems and Networks	6	Semester 2
COMP2123	Data Structures & Algorithms	6	Semester 1 Semester 2
COMP2129	Operating Systems and Machine Principles	6	Semester 1
COMP2823	Data Structures & Algorithms (Adv)	6	Semester 1
COMP2907	Algorithms and Complexity (Advanced)	6	Semester 2
COMP2922	Models of Computation (Adv)	6	Semester 2
COMP3027	Algorithm Design	6	Semester 1
COMP3109	Programming Languages and Paradigms	6	Semester 2
COMP3221	Distributed Systems	6	Semester 1
COMP3308	Introduction to Artificial Intelligence	6	Semester 1
COMP3419	Graphics and Multimedia	6	Semester 2
COMP3520	Operating Systems Internals	6	Semester 2
COMP3530	Discrete Optimization	6	Semester 2
COMP3608	Introduction to Artificial Intelligence (Adv)	6	Semester 1
COMP3615	Computer Science Project	6	Semester 2
COMP3927	Algorithm Design (Adv)	6	Semester 1
DATA2001	Data Science: Big Data and Data Diversity	6	Semester 1
DATA2002	Data Analytics: Learning from Data	6	Semester 2
DATA3001	Data Science Capstone Project [not offered in 2020]	6	Semester 1
DATA3404	Scalable Data Management	6	Semester 1
DATA3406	Human-in-the-Loop Data Analytics	6	Semester 2
ELEC2103	Simulation and Numerical Solutions in Engineering	6	Semester 2
ELEC2302	Signals and Systems	6	Semester 2
ELEC2602	Digital Logic	6	Semester 1
ELEC3104	Engineering Electromagnetics	6	Semester 1
ELEC3105	Circuit Theory and Design	6	Semester 2
ELEC3203	Electricity Networks	6	Semester 1
ELEC3204	Power Electronics and Applications	6	Semester 1
ELEC3206	Electrical Energy Conversion Systems	6	Semester 2
ELEC3304	Control	6	Semester 2
ELEC3305	Digital Signal Processing	6	Semester 1
ELEC3404	Electronic Circuit Design	6	Semester 1
ELEC3405	Communications Electronics and Photonics	6	Semester 2
ELEC3505	Communications	6	Semester 1
ELEC3506	Communications Networks	6	Semester 2
ELEC3607	Embedded Systems	6	Semester 1
ELEC3608	Computer Architecture	6	Semester 2
ELEC3609	Internet Software Platforms	6	Semester 2
ELEC3610	E-Business Analysis and Design	6	Semester 1
ELEC3702	Management for Engineers	6	Semester 2
ELEC3802	Fundamentals of Biomedical Engineering	6	Semester 1
ELEC3803	Bioelectronics [not offered in 2021]	6	Semester 2
ELEC3901	Electrical Exchange Unit 1A	6	Semester 1 Int January Int July
ELEC3902	Electrical Exchange Unit 1B	12	Semester 1
ELEC3903	Electrical Exchange Unit 1C	24	Semester 1
ELEC3904	Electrical Exchange Unit 2A	6	Semester 2 Int January Int July
ELEC3905	Electrical Exchange Unit 2B	12	Semester 2
ELEC3906	Electrical Exchange Unit 2C	24	Semester 2
INFO1113	Object-Oriented Programming	6	Semester 1 Semester 2
INFO2110	Systems Analysis and Modelling	6	Semester 2
INFO2120	Database Systems 1	6	Semester 1
INFO2150	Introduction to Health Data Science	6	Semester 2
INFO2315	Introduction to IT Security	6	Semester 2
INFO2820	Database Systems 1 (Advanced)	6	Semester 1
INFO2911	IT Special Project 2A	6	Semester 1
INFO2912	IT Special Project 2B	6	Semester 2
INFO3220	Object Oriented Design	6	Semester 1
INFO3315	Human-Computer Interaction	6	Semester 2
INFO3402	Management of IT Projects and Systems	6	Semester 1
INFO3404	Database Systems 2	6	Semester 1 Semester 2
INFO3406	Introduction to Data Analytics [not offered in 2020]	6	Semester 2
INFO3504	Database Systems 2 (Adv)	6	Semester 2
INFO3600	Major Development Project (Advanced)	12	Semester 2
INFO3616	Principles of Security and Security Engineering	6	Semester 2
INFO3911	IT Special Project 3A	6	Semester 1
INFO3912	IT Special Project 3B	6	Semester 2
ISYS2110	Analysis & Design of Web Information Systems	6	Semester 1
ISYS2120	Data & Information Management	6	Semester 2
ISYS2160	Information Systems in the Internet Age	6	Semester 2
ISYS3400	Information Systems Project	6	Semester 2
ISYS3401	Information Technology Evaluation	6	Semester 1
ISYS3402	Decision Analytics & Support Systems [not running in 2019]	6	Semester 2
MECH2400	Mechanical Systems Design 1	6	Semester 1
MECH3260	Thermal Engineering and Environment	6	Semester 2
MECH3261	Fluid Mechanics 2	6	Semester 1
MECH3361	Mechanics of Solids 2	6	Semester 2
MECH3362	Engineering Materials for Adv Manufacturing	6	Semester 1
MTRX1701	Introduction to Mechatronic Engineering	6	Semester 1
MTRX1702	Mechatronics 1	6	Semester 2
MTRX1705	Introduction to Mechatronic Design	6	Semester 2
MTRX2700	Mechatronics 2	6	Semester 1
MTRX3700	Mechatronics 3	6	Semester 2
MTRX3760	Mechatronic Systems Design	6	Semester 2
SOFT2201	Software Construction and Design 1	6	Semester 2
SOFT2412	Agile Software Development Practices	6	Semester 2
SOFT3202	Software Construction and Design 2	6	Semester 1
SOFT3410	Concurrency for Software Development	6	Semester 2
SOFT3413	Software Development Project [not offered in 2020]	6	Semester 2

Note: A total of 48 CP should be chosen from the Biomedical Stream Electives. A maximum of 12cp can be taken as General Engineering Electives.

Additional units also include all level-2000 and level-3000 CHNG, COMP, ELEC and INFO units.

Block 9 - Bachelor of Engineering General Elective Table (Max CP: 12)

Unit Code	Unit Name	CP	Sessions Offered
AMME2000	Engineering Analysis	6	Semester 1
ASNS2665	Understanding Southeast Asia	6	Semester 1 Int February Int July
EDUF3026	Global Poverty and Education	6	Semester 2
ENGG1000	History and Philosophy of Engineering	6	Semester 1
HSBH3009	International Health Project	6	Semester 2
ITLS6007	Disaster Relief Operations [not offered in 2021]	6	Int July
MATH2067	DEs and Vector Calculus for Engineers	6	Semester 1
PMGT3857	International Project Management	6	Semester 2

Note: Students may take 12 credit points of free general electives to complete the total number of credit points for their degree. Students may take the following units of study as free general electives, provided they satisfy any prerequisite, quota, departmental permission or any other requirements of the units, and the units are not essentially the same or prohibited units for any of the other units in their degree.

(1) Any units of study from the Faculties of: (i) Engineering and Information Technologies (ii) Science (iii) Arts (iv) Sydney Business School

(2) Any other units of study approved by the Faculty of Engineering and Information Technologies Courses Committee, which will be published in an appropriate place by the Faculty.

(3) Any units of study approved by the Dean (or his/her delegate in these matters), or by the relevant Head of School or Program Director, on a case by case basis upon application by the student.

Course:	Biomedical Engineering (mid-year) (2016)
CP Required:	192
Min FT Duration:	4.00 Years
Min PT Duration:	4.00 Years
Faculty/School:	Faculty of Engineering
Years Offered:	2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016

Faculty of Engineering

Biomedical Engineering (mid-year) (2016)

1. Overview